[Mon May 21 14:48:39 2012] Detection parameters:
  Position = (289.4, 283.0) = 14 7 33.82 -27 3 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.1 +/- 31.1
  Background counts = 675.3
  Rate = 0.002 +/- 0.0003

[Mon May 21 14:48:40 2012] Off-axis axis estimate = 1.30'
[Mon May 21 15:02:37 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Mon May 21 15:02:37 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Mon May 21 15:02:37 2012] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.663
[Mon May 21 15:02:37 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 7.08"
[Tue May 22 22:31:49 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src43.ximg exists
[Tue May 22 22:31:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src43.csv
[Tue May 22 22:31:49 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue May 22 22:31:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src43.csv
[Tue May 22 22:31:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 22:31:50 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue May 22 22:31:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Tue May 22 22:31:50 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue May 22 22:31:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Tue May 22 22:31:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 03:42:04 2012] Warning, spatial fit 43 centroid is now closest to src. 42
[Wed May 23 03:42:04 2012] Vigneting correction estimate = 1.000000
[Wed May 23 03:42:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 03:42:04 2012] Assessing source extent using major
[Wed May 23 03:42:04 2012] Source does appear to be extended
[Wed May 23 03:42:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 03:42:04 2012] Source is confused with source 42
[Wed May 23 03:43:01 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Wed May 23 03:43:01 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Wed May 23 03:43:01 2012] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.663
[Wed May 23 03:43:01 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 7.08"
[Wed May 23 07:29:56 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src41.ximg exists
[Wed May 23 07:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src41.csv
[Wed May 23 07:29:56 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed May 23 07:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src41.csv
[Wed May 23 07:29:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 07:29:57 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed May 23 07:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src41.csv
[Wed May 23 07:29:57 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed May 23 07:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src41.csv
[Wed May 23 07:29:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 13:16:00 2012] Spatial fit model total counts = 11174.800000, observed total counts = 4921.000000
[Wed May 23 13:16:00 2012] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 13:16:00 2012] Spatial fit model total counts = 4827.700000, observed total counts = 4622.000000
[Wed May 23 13:16:00 2012] Offset between fit and detection position for source 44 = 5.215002 pixels
[Wed May 23 13:16:00 2012] Warning, changing simple spatial fit ID from 41 to 42
[Wed May 23 13:16:00 2012] 3072.382000 total counts/ 433.092000 bgd. counts: snr = 126.822711
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 5.215002 pixels
  Position = (284.3, 283.7) = 14 7 35.50 -27 3 47.7
  Extent = 14.8" x 14.8", rotation angle = 0
  Source counts = 2639.3 +/- 55.4
  Background counts = 433.1
  Rate = 0.04 +/- 0.0009
[Wed May 23 13:16:00 2012] Vigneting correction estimate = 1.000000
[Wed May 23 13:16:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 13:16:00 2012] Assessing source extent using major
[Wed May 23 13:16:00 2012] Source does appear to be extended
[Wed May 23 13:16:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 13:16:52 2012] Counts = 2639.290000, rescaling region sizes by 2.000000
[Wed May 23 13:16:52 2012] XMMSAS src. selection expression = ellipse(24683.662000, 24633.863600, 1775.412051, 1775.412051, 0.000000, X, Y)
[Wed May 23 13:16:52 2012] Writing source region out to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src44_src.reg
[Wed May 23 13:16:52 2012] Extracting stamp from image fullrun_pn_xmm0504780301_pi300-10000_cl_sm2.00.img.gz, (182, 182) - (386, 386)
[Wed May 23 13:16:53 2012] XMMSAS bgd. selection expression = annulus(24683.662000, 24633.863600, 5918.040170, 11836.080341, X, Y) && !ellipse(29954.418220, 17745.638000, 475.184814, 475.184814, 0.000000, X, Y) && !ellipse(26225.736000, 27937.891000, 3480.984100, 3480.984100, 0.000000, X, Y) && !ellipse(22177.058228, 27066.175201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.103973, 28777.036255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25481.810364, 29042.366608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26313.123932, 29586.291840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16388.050934, 23850.775421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26062.412640, 30492.983600, 390.596011, 390.596011, 0.000000, X, Y) && !ellipse(30380.618195, 28632.597351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20467.410522, 15191.738541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12985.721161, 26994.154877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23462.304810, 26913.189758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24170.671936, 26118.927124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18895.007919, 37219.161224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29182.177795, 36053.382996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33847.428009, 34113.902679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17706.133591, 12743.238663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20280.692932, 31018.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22651.618164, 30822.996521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36955.084045, 28519.941803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34971.206329, 27905.400757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.112640, 27682.508392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.541718, 28008.986725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.421631, 27352.374084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.483459, 26402.813477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29042.852478, 26147.856323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.413727, 26147.404968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30609.194977, 25700.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.962158, 25710.851776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29089.575684, 25526.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28817.870000, 25327.644000, 1189.248034, 1189.248034, 0.000000, X, Y) && !ellipse(26421.322000, 24183.706000, 1125.584032, 1125.584032, 0.000000, X, Y) && !ellipse(24789.997345, 25078.394592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27712.645600, 24162.050000, 1168.904034, 1168.904034, 0.000000, X, Y) && !ellipse(24152.360199, 24399.081451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22368.058400, 24036.915400, 498.035214, 498.035214, 0.000000, X, Y) && !ellipse(22161.251600, 23160.359200, 555.728816, 555.728816, 0.000000, X, Y) && !ellipse(19683.003320, 22086.663600, 382.360011, 382.360011, 0.000000, X, Y) && !ellipse(32569.156189, 16229.943939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20628.708862, 21520.322128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22415.272040, 20999.786600, 384.506466, 384.506466, 0.000000, X, Y) && !ellipse(24235.933100, 20793.317800, 489.296814, 489.296814, 0.000000, X, Y) && !ellipse(28595.012756, 20583.521591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17172.957245, 18781.893051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.704132, 17827.242752, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 13:16:53 2012] Writing fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src44.gif
[Wed May 23 14:39:06 2012] Mean detx,y = (-2419.58, 1719.96) 
[Wed May 23 14:39:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:47:31 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:47:32 2012] Setting source spectrum file to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed May 23 14:47:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src44_bgd.pi.gz