[Mon May 21 14:48:36 2012] Detection parameters:
  Position = (287.2, 331.3) = 14 7 34.53 -27 0 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2695.4 +/- 77.8
  Background counts = 823.9
  Rate = 0.03 +/- 0.001

[Mon May 21 14:48:40 2012] Off-axis axis estimate = 2.52'
[Mon May 21 15:02:37 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon May 21 15:02:37 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Mon May 21 15:02:37 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.118
[Mon May 21 15:02:37 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.69"
[Tue May 22 22:31:48 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src4.ximg exists
[Tue May 22 22:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src4.csv
[Tue May 22 22:31:48 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue May 22 22:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src4.csv
[Tue May 22 22:31:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 22:31:50 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue May 22 22:31:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 22 22:31:50 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue May 22 22:31:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 22 22:31:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 03:42:04 2012] Source 4 is offset by -6.821081 and 6.397405 pixels which is larger than
2 X fitted extent = 6.052920 x 6.052920, not incorporating fit results
[Wed May 23 03:42:04 2012] Vigneting correction estimate = 1.000000
[Wed May 23 03:42:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 03:42:04 2012] Assessing source extent using major
[Wed May 23 03:42:04 2012] Source does appear to be extended
[Wed May 23 03:42:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 03:42:04 2012] Source is confused with source 5
[Wed May 23 03:43:01 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed May 23 03:43:01 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Wed May 23 03:43:01 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.118
[Wed May 23 03:43:01 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.69"
[Wed May 23 07:29:55 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 23 07:29:55 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 23 07:29:55 2012] Fit fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed May 23 07:29:56 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 23 07:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 23 07:29:56 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 23 07:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 23 07:29:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 13:16:00 2012] Source 4 is offset by 7.488345 and 4.495888 pixels which is larger than
2 X fitted extent = 7.409977 x 7.409977, not incorporating fit results
[Wed May 23 13:16:00 2012] Vigneting correction estimate = 1.000000
[Wed May 23 13:16:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 13:16:00 2012] Assessing source extent using major
[Wed May 23 13:16:00 2012] Source does appear to be extended
[Wed May 23 13:16:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 13:16:50 2012] Counts = 2695.440430, rescaling region sizes by 2.000000
[Wed May 23 13:16:50 2012] XMMSAS src. selection expression = ellipse(24942.103973, 28777.036255, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 23 13:16:50 2012] Writing source region out to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src4_src.reg
[Wed May 23 13:16:50 2012] Extracting stamp from image fullrun_pn_xmm0504780301_pi300-10000_cl_sm2.00.img.gz, (212, 256) - (362, 406)
[Wed May 23 13:16:51 2012] XMMSAS bgd. selection expression = annulus(24942.103973, 28777.036255, 4350.000000, 8700.000000, X, Y) && !ellipse(26225.736000, 27937.891000, 3480.984100, 3480.984100, 0.000000, X, Y) && !ellipse(22177.058228, 27066.175201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25481.810364, 29042.366608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26313.123932, 29586.291840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16388.050934, 23850.775421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26062.412640, 30492.983600, 390.596011, 390.596011, 0.000000, X, Y) && !ellipse(30380.618195, 28632.597351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23462.304810, 26913.189758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24170.671936, 26118.927124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18895.007919, 37219.161224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29182.177795, 36053.382996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33847.428009, 34113.902679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20280.692932, 31018.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22651.618164, 30822.996521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.112640, 27682.508392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.541718, 28008.986725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.421631, 27352.374084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.483459, 26402.813477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29042.852478, 26147.856323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.413727, 26147.404968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30609.194977, 25700.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.962158, 25710.851776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29089.575684, 25526.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28817.870000, 25327.644000, 1189.248034, 1189.248034, 0.000000, X, Y) && !ellipse(26421.322000, 24183.706000, 1125.584032, 1125.584032, 0.000000, X, Y) && !ellipse(24789.997345, 25078.394592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27712.645600, 24162.050000, 1168.904034, 1168.904034, 0.000000, X, Y) && !ellipse(24683.662000, 24633.863600, 1183.608034, 1183.608034, 0.000000, X, Y) && !ellipse(24152.360199, 24399.081451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22368.058400, 24036.915400, 498.035214, 498.035214, 0.000000, X, Y) && !ellipse(22161.251600, 23160.359200, 555.728816, 555.728816, 0.000000, X, Y) && !ellipse(19683.003320, 22086.663600, 382.360011, 382.360011, 0.000000, X, Y) && !ellipse(20628.708862, 21520.322128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22415.272040, 20999.786600, 384.506466, 384.506466, 0.000000, X, Y) && !ellipse(24235.933100, 20793.317800, 489.296814, 489.296814, 0.000000, X, Y) && !ellipse(28595.012756, 20583.521591, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 13:16:51 2012] Writing fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src4.gif
[Wed May 23 13:43:34 2012] Mean detx,y = (-366.40, -1091.75) 
[Wed May 23 13:43:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 13:46:54 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 13:46:55 2012] Setting source spectrum file to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 23 13:46:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 23 22:14:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 22:14:26 2012] rmf not generated due to insufficient counts