[Mon May 21 14:48:38 2012] Detection parameters:
  Position = (339.2, 315.0) = 14 7 17.61 -27 1 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.1 +/- 43.3
  Background counts = 893.9
  Rate = 0.004 +/- 0.0005

[Mon May 21 14:48:40 2012] Off-axis axis estimate = 3.19'
[Mon May 21 15:02:37 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Mon May 21 15:02:37 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Mon May 21 15:02:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.910
[Mon May 21 15:02:37 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.02"
[Tue May 22 22:31:49 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src32.ximg exists
[Tue May 22 22:31:49 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue May 22 22:31:49 2012] Fit fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src32 appears to have run properly
[Tue May 22 22:31:50 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue May 22 22:31:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue May 22 22:31:50 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue May 22 22:31:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue May 22 22:31:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 03:42:04 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 14.065996 pixels away
[Wed May 23 03:42:04 2012] Vigneting correction estimate = 1.000000
[Wed May 23 03:42:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 03:42:04 2012] Assessing source extent using major
[Wed May 23 03:42:04 2012] Source does appear to be extended
[Wed May 23 03:42:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 03:43:01 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Wed May 23 03:43:01 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Wed May 23 03:43:01 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.910
[Wed May 23 03:43:01 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.02"
[Wed May 23 07:29:56 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src30.ximg exists
[Wed May 23 07:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src30.csv
[Wed May 23 07:29:56 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed May 23 07:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src30.csv
[Wed May 23 07:29:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 07:29:56 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed May 23 07:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed May 23 07:29:56 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed May 23 07:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed May 23 07:29:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 13:16:00 2012] Source 33 is offset by -1.845567 and -7.133470 pixels which is larger than
2 X fitted extent = 0.989246 x 7.913931, not incorporating fit results
[Wed May 23 13:16:00 2012] Spatial fit model total counts = 8645.780000, observed total counts = 7257.000000
[Wed May 23 13:16:00 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 13:16:00 2012] Vigneting correction estimate = 1.000000
[Wed May 23 13:16:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 13:16:00 2012] Assessing source extent using major
[Wed May 23 13:16:00 2012] Source does appear to be extended
[Wed May 23 13:16:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 13:16:52 2012] XMMSAS src. selection expression = ellipse(29465.421631, 27352.374084, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 13:16:52 2012] Writing source region out to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src33_src.reg
[Wed May 23 13:16:52 2012] Extracting stamp from image fullrun_pn_xmm0504780301_pi300-10000_cl_sm2.00.img.gz, (302, 277) - (377, 352)
[Wed May 23 13:16:52 2012] XMMSAS bgd. selection expression = annulus(29465.421631, 27352.374084, 1087.500000, 2175.000000, X, Y) && !ellipse(26225.736000, 27937.891000, 3480.984100, 3480.984100, 0.000000, X, Y) && !ellipse(30380.618195, 28632.597351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.483459, 26402.813477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29042.852478, 26147.856323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30609.194977, 25700.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.962158, 25710.851776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29089.575684, 25526.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28817.870000, 25327.644000, 1189.248034, 1189.248034, 0.000000, X, Y) && !ellipse(26421.322000, 24183.706000, 1125.584032, 1125.584032, 0.000000, X, Y) && !ellipse(27712.645600, 24162.050000, 1168.904034, 1168.904034, 0.000000, X, Y)
[Wed May 23 13:16:52 2012] Writing fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src33.gif
[Wed May 23 14:26:00 2012] Mean detx,y = (2613.22, 1943.87) 
[Wed May 23 14:26:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:26:35 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:26:36 2012] Setting source spectrum file to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed May 23 14:26:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src33_bgd.pi.gz