[Mon May 21 14:50:17 2012] Detection parameters:
  Position = (212.2, 349.8) = 14 7 58.96 -26 59 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.4 +/- 22.8
  Background counts = 195.1
  Rate = 0.002 +/- 0.0003

[Mon May 21 14:50:18 2012] Off-axis axis estimate = 7.28'
[Wed May 23 01:26:14 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Wed May 23 01:26:14 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Wed May 23 01:26:14 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.136
[Wed May 23 01:26:14 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.07"
[Wed May 23 03:41:43 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src42.ximg exists
[Wed May 23 03:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src42.csv
[Wed May 23 03:41:43 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed May 23 03:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src42.csv
[Wed May 23 03:41:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 03:41:44 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed May 23 03:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src42.csv
[Wed May 23 03:41:44 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed May 23 03:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src42.csv
[Wed May 23 03:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 03:42:34 2012] Spatial fit model total counts = 1473.880000, observed total counts = 1254.000000
[Wed May 23 03:42:34 2012] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 03:42:34 2012] Vigneting correction estimate = 1.000000
[Wed May 23 03:42:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 03:42:34 2012] Assessing source extent using major
[Wed May 23 03:42:34 2012] Source does appear to be extended
[Wed May 23 03:42:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 03:42:34 2012] Deleting source due to low Poisson probability 0.9