[Mon May 21 14:50:14 2012] Detection parameters:
  Position = (301.2, 320.7) = 14 7 29.99 -27 1 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24249.7 +/- 191.1
  Background counts = 655.2
  Rate = 0.2 +/- 0.002

[Mon May 21 14:50:18 2012] Off-axis axis estimate = 1.63'
[Wed May 23 01:26:14 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Wed May 23 01:26:14 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Wed May 23 01:26:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Wed May 23 01:26:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Wed May 23 03:41:42 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 23 03:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src1.csv
[Wed May 23 03:41:42 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 23 03:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src1.csv
[Wed May 23 03:41:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 03:41:43 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 23 03:41:43 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 23 03:41:43 2012] Fit fullrun_mos2_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 23 03:42:34 2012] Spatial fit model total counts = 54526.300000, observed total counts = 51723.000000
[Wed May 23 03:42:34 2012] Offset between fit and detection position for source 1 = 0.398376 pixels
[Wed May 23 03:42:34 2012] 53260.000000 total counts/ 25600.000000 bgd. counts: snr = 172.875000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.398376 pixels
  Position = (301.4, 321.0) = 14 7 29.93 -27 1 5.2
  Extent = 14.1 (13.8-14.3)", rotation angle = 0
  Source counts = 27660.0 +/- 230.8
  Background counts = 25600.0
  Rate = 0.3 +/- 0.002
[Wed May 23 03:42:34 2012] Vigneting correction estimate = 1.000000
[Wed May 23 03:42:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 03:42:34 2012] Assessing source extent using major axis lower bound
[Wed May 23 03:42:34 2012] Source does appear to be extended
[Wed May 23 03:42:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 03:42:34 2012] Source is confused with source 6
[Wed May 23 10:02:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 10:02:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 23 10:02:19 2012] Initial guess for spatial extent in simple fitting = 14.06"
[Wed May 23 10:02:19 2012] source mask rpix=3.2, npix_max = 55, mask sum = 45, frac = 0.808
[Wed May 23 10:02:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.06"
[Wed May 23 13:15:40 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 23 13:15:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780301_pi300-10000_cl_pass1_src1.csv
[Wed May 23 13:15:40 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 23 13:15:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780301_pi300-10000_cl_pass1_src1.csv
[Wed May 23 13:15:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 13:15:41 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 23 13:15:41 2012] fullrun_mos2_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 23 13:15:41 2012] Fit fullrun_mos2_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 23 13:16:27 2012] Spatial fit model total counts = 98475.500000, observed total counts = 90650.000000
[Wed May 23 13:16:27 2012] Offset between fit and detection position for source 1 = 0.392721 pixels
[Wed May 23 13:16:27 2012] 97385.500000 total counts/ 60512.400000 bgd. counts: snr = 149.895109
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.392721 pixels
  Position = (301.5, 321.4) = 14 7 29.89 -27 1 3.6
  Extent = 17.4 (16.9-17.7)", rotation angle = 0
  Source counts = 36873.1 +/- 312.1
  Background counts = 60512.4
  Rate = 0.4 +/- 0.003
[Wed May 23 13:16:27 2012] Vigneting correction estimate = 1.000000
[Wed May 23 13:16:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 13:16:27 2012] Assessing source extent using major axis lower bound
[Wed May 23 13:16:27 2012] Source does appear to be extended
[Wed May 23 13:16:27 2012] Computing asymmetry using major and minor axis, asym = 1.00