[Mon May 21 14:49:29 2012] Detection parameters:
  Position = (401.6, 364.4) = 14 6 57.33 -26 57 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.5 +/- 24.0
  Background counts = 232.9
  Rate = 0.001 +/- 0.0003

[Mon May 21 14:49:32 2012] Off-axis axis estimate = 8.87'
[Tue May 22 22:31:51 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Tue May 22 22:31:51 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Tue May 22 22:31:51 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Tue May 22 22:31:51 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 10.87"
[Wed May 23 01:26:13 2012] fullrun_mos1_xmm0504780301_pi300-10000_cl_pass0_src46.ximg exists
[Wed May 23 01:26:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780301_pi300-10000_cl_pass0_src46.csv
[Wed May 23 01:26:13 2012] fullrun_mos1_xmm0504780301_pi300-10000_cl_pass0_src46_1.ximg exists
[Wed May 23 01:26:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780301_pi300-10000_cl_pass0_src46.csv
[Wed May 23 01:26:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780301_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780301_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 01:26:14 2012] fullrun_mos1_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Wed May 23 01:26:14 2012] fullrun_mos1_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Wed May 23 01:26:14 2012] Fit fullrun_mos1_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Wed May 23 03:42:18 2012] Spatial fit model total counts = 1748.070000, observed total counts = 1752.000000
[Wed May 23 03:42:18 2012] Offset between fit and detection position for source 20 = 1.810378 pixels
[Wed May 23 03:42:18 2012] 1737.500000 total counts/ 1513.180000 bgd. counts: snr = 5.766638
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.810378 pixels
  Position = (400.1, 365.5) = 14 6 57.81 -26 57 51.8
  Extent = 21.1 (19.8-21.7)", rotation angle = 0
  Source counts = 224.3 +/- 41.7
  Background counts = 1513.2
  Rate = 0.002 +/- 0.0004
[Wed May 23 03:42:19 2012] Vigneting correction estimate = 1.000000
[Wed May 23 03:42:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 03:42:19 2012] Assessing source extent using major axis lower bound
[Wed May 23 03:42:19 2012] Source does appear to be extended
[Wed May 23 03:42:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 07:29:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 07:29:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 23 07:29:57 2012] Initial guess for spatial extent in simple fitting = 21.09"
[Wed May 23 07:29:57 2012] source mask rpix=4.8, npix_max = 114, mask sum = 110, frac = 0.962
[Wed May 23 07:29:57 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 21.09"
[Wed May 23 10:02:17 2012] fullrun_mos1_xmm0504780301_pi300-10000_cl_pass1_src42.ximg exists
[Wed May 23 10:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780301_pi300-10000_cl_pass1_src42.csv
[Wed May 23 10:02:17 2012] fullrun_mos1_xmm0504780301_pi300-10000_cl_pass1_src42_1.ximg exists
[Wed May 23 10:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780301_pi300-10000_cl_pass1_src42.csv
[Wed May 23 10:02:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780301_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780301_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 10:02:18 2012] fullrun_mos1_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Wed May 23 10:02:18 2012] fullrun_mos1_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Wed May 23 10:02:18 2012] Fit fullrun_mos1_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Wed May 23 13:16:14 2012] Warning, spatial fit 42 centroid is now closest to src. 3
[Wed May 23 13:16:14 2012] Vigneting correction estimate = 1.000000
[Wed May 23 13:16:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 13:16:14 2012] Assessing source extent using major axis lower bound
[Wed May 23 13:16:14 2012] Source does appear to be extended
[Wed May 23 13:16:14 2012] Computing asymmetry using major and minor axis, asym = 1.00