[Sat Sep 24 08:49:38 2011] Detection parameters:
  Position = (297.5, 334.6) = 1 52 39.00 36 12 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 460.8 +/- 29.4
  Background counts = 170.3
  Rate = 0.01 +/- 0.0008

[Sat Sep 24 08:49:39 2011] Off-axis axis estimate = 2.62'
[Sat Sep 24 11:09:35 2011] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 11:09:35 2011] Initial guess for spatial extent in simple fitting = 7.74"
[Sat Sep 24 11:09:35 2011] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.914
[Sat Sep 24 11:09:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.74"
[Sat Sep 24 12:50:48 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Sep 24 12:50:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src3.csv
[Sat Sep 24 12:50:48 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Sep 24 12:50:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src3.csv
[Sat Sep 24 12:50:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 12:50:49 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Sep 24 12:50:49 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Sep 24 12:50:49 2011] Fit fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Sep 24 12:51:10 2011] Source 8 is offset by 7.075659 and 3.479116 pixels which is larger than
2 X fitted extent = 0.889600 x 0.889600, not incorporating fit results
[Sat Sep 24 12:51:10 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 12:51:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 12:51:10 2011] Assessing source extent using major
[Sat Sep 24 12:51:10 2011] Source does appear to be extended
[Sat Sep 24 12:51:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 16:44:30 2011] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 16:44:30 2011] Initial guess for spatial extent in simple fitting = 7.74"
[Sat Sep 24 16:44:30 2011] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.914
[Sat Sep 24 16:44:30 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.74"
[Sat Sep 24 18:11:58 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Sep 24 18:11:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src3.csv
[Sat Sep 24 18:11:58 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Sep 24 18:11:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src3.csv
[Sat Sep 24 18:11:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:11:59 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Sep 24 18:11:59 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Sep 24 18:11:59 2011] Fit fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Sep 24 18:12:17 2011] Source 8 is offset by 4.652326 and 6.706702 pixels which is larger than
2 X fitted extent = 1.212827 x 1.212827, not incorporating fit results
[Sat Sep 24 18:12:17 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:12:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:12:17 2011] Assessing source extent using major
[Sat Sep 24 18:12:17 2011] Source does appear to be extended
[Sat Sep 24 18:12:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 22:48:26 2011] XMMSAS src. selection expression = ellipse(25836.198364, 29060.819061, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 22:48:26 2011] Writing source region out to fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src8_src.reg
[Sat Sep 24 22:48:26 2011] Extracting stamp from image fullrun_mos2_xmm0504780201_pi300-10000_cl_sm2.00.img.gz, (260, 297) - (335, 372)
[Sat Sep 24 22:48:26 2011] XMMSAS bgd. selection expression = annulus(25836.198364, 29060.819061, 1087.500000, 2175.000000, X, Y) && !ellipse(24789.989380, 27474.824036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22909.538000, 26088.332000, 1257.696036, 1257.696036, 0.000000, X, Y) && !ellipse(23865.994049, 26738.435730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24883.214000, 26890.630000, 1118.576032, 1118.576032, 0.000000, X, Y) && !ellipse(24865.840000, 26438.442000, 999.672029, 999.672029, 0.000000, X, Y) && !ellipse(23383.883209, 26906.015869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26225.181396, 26059.677490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24124.092000, 27101.022000, 1175.808034, 731.912821, 129.261500, X, Y) && !ellipse(22707.384000, 28269.174000, 1254.704036, 1254.704036, 0.000000, X, Y) && !ellipse(21999.722000, 26524.596000, 2407.008069, 2407.008069, 0.000000, X, Y) && !ellipse(25429.535492, 27175.039368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23980.352200, 28117.538000, 2350.656068, 2350.656068, 0.000000, X, Y)
[Sat Sep 24 22:48:26 2011] Writing fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src8.gif
[Sat Sep 24 22:56:51 2011] Mean detx,y = (-295.64, -4378.73) 
[Sat Sep 24 22:56:53 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 22:57:05 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 22:57:05 2011] Setting source spectrum file to fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Sep 24 22:57:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Sep 24 23:37:41 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 23:37:41 2011] rmf not generated due to insufficient counts
[Sun Sep 25 03:15:01 2011] Updating aperture counts using extracted products
[Sun Sep 25 03:15:01 2011] Error reading totcts from fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Sep 25 03:15:01 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 03:15:01 2011] Using photon index=1.80, rate=0.0133, arf fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src8.arf
[Sun Sep 25 03:15:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 03:15:01 2011] Updating source flux to 1.4e-13
[Sun Sep 25 03:16:52 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting