[Sat Sep 24 08:49:38 2011] Detection parameters:
  Position = (275.0, 318.1) = 1 52 47.09 36 11 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.6 +/- 27.7
  Background counts = 252.7
  Rate = 0.004 +/- 0.0007

[Sat Sep 24 08:49:39 2011] Off-axis axis estimate = 2.22'
[Sat Sep 24 11:09:35 2011] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 11:09:35 2011] Initial guess for spatial extent in simple fitting = 7.54"
[Sat Sep 24 11:09:35 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Sat Sep 24 11:09:35 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 7.54"
[Sat Sep 24 12:50:48 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src24.ximg exists
[Sat Sep 24 12:50:48 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Sep 24 12:50:48 2011] Fit fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src24 appears to have run properly
[Sat Sep 24 12:50:49 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Sep 24 12:50:49 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Sep 24 12:50:49 2011] Fit fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sat Sep 24 12:51:10 2011] Spatial fit model total counts = 4980.240000, observed total counts = 4973.000000
[Sat Sep 24 12:51:10 2011] Offset between fit and detection position for source 16 = 5.267652 pixels
[Sat Sep 24 12:51:10 2011] Warning, changing simple spatial fit ID from 24 to 6
[Sat Sep 24 12:51:10 2011] 4738.380000 total counts/ 4361.250000 bgd. counts: snr = 5.710651
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 5.267652 pixels
  Position = (278.1, 313.9) = 1 52 45.98 36 11 0.1
  Extent = 14.7 (14.7-29.4)", rotation angle = 0
  Source counts = 377.1 +/- 68.8
  Background counts = 4361.2
  Rate = 0.009 +/- 0.002
[Sat Sep 24 12:51:10 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 12:51:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 12:51:10 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 12:51:10 2011] Source does appear to be extended
[Sat Sep 24 12:51:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 12:51:10 2011] Source is confused with source 4
[Sat Sep 24 16:44:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 16:44:30 2011] Initial guess for spatial extent in simple fitting = 14.70"
[Sat Sep 24 16:44:30 2011] source mask rpix=3.4, npix_max = 60, mask sum = 60, frac = 0.997
[Sat Sep 24 16:44:30 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 14.70"
[Sat Sep 24 18:11:58 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src22.ximg exists
[Sat Sep 24 18:11:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src22.csv
[Sat Sep 24 18:11:58 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Sep 24 18:11:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src22.csv
[Sat Sep 24 18:11:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:11:59 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Sep 24 18:11:59 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Sep 24 18:11:59 2011] Fit fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Sep 24 18:12:17 2011] Spatial fit model total counts = 4975.960000, observed total counts = 4973.000000
[Sat Sep 24 18:12:17 2011] Offset between fit and detection position for source 16 = 1.830936 pixels
[Sat Sep 24 18:12:17 2011] Warning, changing simple spatial fit ID from 22 to 6
[Sat Sep 24 18:12:17 2011] 4712.192000 total counts/ 4338.060000 bgd. counts: snr = 5.680376
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.830936 pixels
  Position = (277.8, 312.1) = 1 52 46.07 36 10 52.2
  Extent = 14.7 (13.7-29.4)" x 9.1 (7.4-13.7)", rotation angle = 129 (116-148) degrees
  Source counts = 374.1 +/- 68.6
  Background counts = 4338.1
  Rate = 0.009 +/- 0.002
[Sat Sep 24 18:12:17 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:12:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:12:17 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 18:12:17 2011] Source does appear to be extended
[Sat Sep 24 18:12:17 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Sat Sep 24 22:48:27 2011] XMMSAS src. selection expression = ellipse(24124.092000, 27101.022000, 881.856025, 548.934616, 129.261500, X, Y)
[Sat Sep 24 22:48:27 2011] Writing source region out to fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src16_src.reg
[Sat Sep 24 22:48:27 2011] Extracting stamp from image fullrun_mos2_xmm0504780201_pi300-10000_cl_sm2.00.img.gz, (227, 261) - (329, 363)
[Sat Sep 24 22:48:27 2011] XMMSAS bgd. selection expression = annulus(24124.092000, 27101.022000, 1469.760042, 2939.520085, X, Y) && !ellipse(24150.307180, 25015.013000, 1035.552030, 1035.552030, 0.000000, X, Y) && !ellipse(24789.989380, 27474.824036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23266.378000, 25501.818000, 1234.648036, 1234.648036, 0.000000, X, Y) && !ellipse(25836.198364, 29060.819061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22909.538000, 26088.332000, 1257.696036, 1257.696036, 0.000000, X, Y) && !ellipse(23865.994049, 26738.435730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24883.214000, 26890.630000, 1118.576032, 1118.576032, 0.000000, X, Y) && !ellipse(24865.840000, 26438.442000, 999.672029, 999.672029, 0.000000, X, Y) && !ellipse(22522.039459, 26565.046387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23383.883209, 26906.015869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25661.123077, 23864.071808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20640.826000, 28203.634000, 1834.024053, 1834.024053, 0.000000, X, Y) && !ellipse(22164.821198, 25094.428314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25906.628326, 25003.408600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26225.181396, 26059.677490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.644000, 23400.500000, 1166.384034, 1166.384034, 0.000000, X, Y) && !ellipse(23368.401733, 23478.731476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22707.384000, 28269.174000, 1254.704036, 1254.704036, 0.000000, X, Y) && !ellipse(21999.722000, 26524.596000, 2407.008069, 2407.008069, 0.000000, X, Y) && !ellipse(26288.007355, 24664.414459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25429.535492, 27175.039368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22186.040192, 28561.445221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23980.352200, 28117.538000, 2350.656068, 2350.656068, 0.000000, X, Y) && !ellipse(21421.142000, 27089.930000, 1294.472037, 1294.472037, 0.000000, X, Y)
[Sat Sep 24 22:48:27 2011] Writing fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src16.gif
[Sat Sep 24 23:02:36 2011] Mean detx,y = (-945.71, -1841.97) 
[Sat Sep 24 23:02:37 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 23:02:47 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 23:02:47 2011] Setting source spectrum file to fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Sep 24 23:02:47 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Sep 25 03:15:01 2011] Updating aperture counts using extracted products
[Sun Sep 25 03:15:01 2011] Error reading totcts from fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Sep 25 03:15:02 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 03:15:02 2011] Using photon index=1.80, rate=0.00908, arf fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src16.arf
[Sun Sep 25 03:15:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 03:15:02 2011] Updating source flux to 9.6e-14
[Sun Sep 25 03:16:52 2011] Flag c found in src. 16 procflags, skipping spectral fitting