[Sat Sep 24 08:49:38 2011] Detection parameters:
  Position = (278.0, 288.0) = 1 52 46.00 36 9 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5683.8 +/- 96.7
  Background counts = 291.0
  Rate = 0.1 +/- 0.002

[Sat Sep 24 08:49:39 2011] Off-axis axis estimate = 1.66'
[Sat Sep 24 11:09:35 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 11:09:35 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Sep 24 11:09:35 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Sat Sep 24 11:09:35 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sat Sep 24 12:50:48 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep 24 12:50:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 12:50:48 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep 24 12:50:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 12:50:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 12:50:49 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 12:50:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Sep 24 12:50:49 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 12:50:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Sep 24 12:50:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 12:51:10 2011] Warning, spatial fit 1 centroid is now closest to src. 2
[Sat Sep 24 12:51:10 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 12:51:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 12:51:10 2011] Assessing source extent using major
[Sat Sep 24 12:51:10 2011] Source does appear to be extended
[Sat Sep 24 12:51:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 16:44:30 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 16:44:30 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Sep 24 16:44:30 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Sat Sep 24 16:44:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Sat Sep 24 18:11:58 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep 24 18:11:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 18:11:58 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep 24 18:11:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 18:11:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 18:11:59 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 18:11:59 2011] fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 18:11:59 2011] Fit fullrun_mos2_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 18:12:17 2011] Spatial fit model total counts = 16460.900000, observed total counts = 16472.000000
[Sat Sep 24 18:12:17 2011] Offset between fit and detection position for source 1 = 0.135902 pixels
[Sat Sep 24 18:12:17 2011] 16409.050000 total counts/ 9971.240000 bgd. counts: snr = 64.470876
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.135902 pixels
  Position = (278.1, 288.1) = 1 52 45.96 36 9 7.9
  Extent = 12.9 (12.5-13.6)", rotation angle = 0
  Source counts = 6437.8 +/- 128.1
  Background counts = 9971.2
  Rate = 0.2 +/- 0.003
[Sat Sep 24 18:12:17 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:12:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:12:17 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 18:12:17 2011] Source does appear to be extended
[Sat Sep 24 18:12:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 22:48:26 2011] Counts = 6437.810000, rescaling region sizes by 2.000000
[Sat Sep 24 22:48:26 2011] XMMSAS src. selection expression = ellipse(24150.307180, 25015.013000, 1553.328045, 1553.328045, 0.000000, X, Y)
[Sat Sep 24 22:48:26 2011] Writing source region out to fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep 24 22:48:26 2011] Extracting stamp from image fullrun_mos2_xmm0504780201_pi300-10000_cl_sm2.00.img.gz, (189, 199) - (367, 377)
[Sat Sep 24 22:48:26 2011] XMMSAS bgd. selection expression = annulus(24150.307180, 25015.013000, 5177.760149, 10355.520298, X, Y) && !ellipse(24789.989380, 27474.824036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23266.378000, 25501.818000, 1234.648036, 1234.648036, 0.000000, X, Y) && !ellipse(25836.198364, 29060.819061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22909.538000, 26088.332000, 1257.696036, 1257.696036, 0.000000, X, Y) && !ellipse(25736.661800, 22925.864000, 373.268011, 373.268011, 0.000000, X, Y) && !ellipse(23865.994049, 26738.435730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24883.214000, 26890.630000, 1118.576032, 1118.576032, 0.000000, X, Y) && !ellipse(24865.840000, 26438.442000, 999.672029, 999.672029, 0.000000, X, Y) && !ellipse(29972.455231, 22156.765839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22522.039459, 26565.046387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17692.404434, 28735.522217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23383.883209, 26906.015869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25661.123077, 23864.071808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18983.312866, 28890.607788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20640.826000, 28203.634000, 1834.024053, 1834.024053, 0.000000, X, Y) && !ellipse(22164.821198, 25094.428314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25906.628326, 25003.408600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26225.181396, 26059.677490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.644000, 23400.500000, 1166.384034, 1166.384034, 0.000000, X, Y) && !ellipse(23368.401733, 23478.731476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24124.092000, 27101.022000, 1175.808034, 731.912821, 129.261500, X, Y) && !ellipse(22707.384000, 28269.174000, 1254.704036, 1254.704036, 0.000000, X, Y) && !ellipse(21999.722000, 26524.596000, 2407.008069, 2407.008069, 0.000000, X, Y) && !ellipse(26288.007355, 24664.414459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25429.535492, 27175.039368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22186.040192, 28561.445221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23980.352200, 28117.538000, 2350.656068, 2350.656068, 0.000000, X, Y) && !ellipse(21421.142000, 27089.930000, 1294.472037, 1294.472037, 0.000000, X, Y)
[Sat Sep 24 22:48:26 2011] Writing fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src1.gif
[Sat Sep 24 22:48:38 2011] Mean detx,y = (29.66, -5.48) 
[Sat Sep 24 22:48:40 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 22:53:49 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 22:53:49 2011] Setting source spectrum file to fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 22:53:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Sep 25 03:15:00 2011] Updating aperture counts using extracted products
[Sun Sep 25 03:15:00 2011] Error reading totcts from fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Sep 25 03:15:01 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 03:15:01 2011] Using photon index=1.80, rate=0.156, arf fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 03:15:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 03:15:01 2011] Updating source flux to 1.5e-12
[Sun Sep 25 03:19:53 2011] Reading fit data from xmm0504780201/analysis//spectral/fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Sep 25 03:19:53 2011] Spectral fit parameter nH value = 4.03608e+21
[Sun Sep 25 03:19:53 2011] Spectral fit parameter PhoIndex value = 3.5326
[Sun Sep 25 03:19:53 2011] Failed to get F(0.3-8.0) from xmm0504780201/analysis//spectral/fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 03:19:53 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 03:19:53 2011] Using Nh = 4e+21, photon index=3.53, rate=0.156, arf fullrun_mos2_xmm0504780201_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 03:19:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 03:19:53 2011] Updating source flux to 1.1e-12