[Sat Sep 24 08:49:17 2011] Detection parameters:
  Position = (278.2, 288.0) = 1 52 45.95 36 9 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5706.6 +/- 99.2
  Background counts = 317.2
  Rate = 0.1 +/- 0.002

[Sat Sep 24 08:49:17 2011] Off-axis axis estimate = 1.65'
[Sat Sep 24 10:17:33 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 10:17:33 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Sep 24 10:17:33 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sat Sep 24 10:17:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sat Sep 24 11:09:34 2011] fullrun_mos1_xmm0504780201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep 24 11:09:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780201_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 11:09:34 2011] fullrun_mos1_xmm0504780201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep 24 11:09:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780201_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 11:09:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 11:09:34 2011] fullrun_mos1_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 11:09:34 2011] fullrun_mos1_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 11:09:34 2011] Fit fullrun_mos1_xmm0504780201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 12:51:03 2011] Spatial fit model total counts = 17548.100000, observed total counts = 17551.000000
[Sat Sep 24 12:51:03 2011] Offset between fit and detection position for source 2 = 0.194681 pixels
[Sat Sep 24 12:51:03 2011] 17383.550000 total counts/ 11031.200000 bgd. counts: snr = 60.481568
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.194681 pixels
  Position = (278.3, 288.2) = 1 52 45.91 36 9 8.3
  Extent = 13.5 (12.7-14.4)", rotation angle = 0
  Source counts = 6352.4 +/- 131.8
  Background counts = 11031.2
  Rate = 0.2 +/- 0.003
[Sat Sep 24 12:51:03 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 12:51:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 12:51:03 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 12:51:03 2011] Source does appear to be extended
[Sat Sep 24 12:51:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:59:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:59:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 14:59:05 2011] Initial guess for spatial extent in simple fitting = 13.55"
[Sat Sep 24 14:59:05 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.938
[Sat Sep 24 14:59:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.55"
[Sat Sep 24 16:44:29 2011] fullrun_mos1_xmm0504780201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep 24 16:44:29 2011] fullrun_mos1_xmm0504780201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep 24 16:44:29 2011] Fit fullrun_mos1_xmm0504780201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Sep 24 16:44:29 2011] fullrun_mos1_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 16:44:29 2011] fullrun_mos1_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 16:44:29 2011] Fit fullrun_mos1_xmm0504780201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 18:12:11 2011] Spatial fit model total counts = 29512.100000, observed total counts = 29489.000000
[Sat Sep 24 18:12:12 2011] Offset between fit and detection position for source 2 = 0.089984 pixels
[Sat Sep 24 18:12:12 2011] 28925.280000 total counts/ 24399.100000 bgd. counts: snr = 28.976433
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.089984 pixels
  Position = (278.4, 288.1) = 1 52 45.88 36 9 8.1
  Extent = 8.5" x 8.5", rotation angle = 353
  Source counts = 4526.2 +/- 170.1
  Background counts = 24399.1
  Rate = 0.1 +/- 0.004
[Sat Sep 24 18:12:12 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 18:12:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 18:12:12 2011] Assessing source extent using major
[Sat Sep 24 18:12:12 2011] Source does appear to be extended
[Sat Sep 24 18:12:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 21:55:52 2011] Counts = 4526.180000, rescaling region sizes by 2.000000
[Sat Sep 24 21:55:52 2011] XMMSAS src. selection expression = ellipse(24168.825200, 25019.605400, 1017.636029, 1017.636029, 353.140480, X, Y)
[Sat Sep 24 21:55:52 2011] Writing source region out to fullrun_mos1_xmm0504780201_pi300-10000_pass1_cl_src2_src.reg
[Sat Sep 24 21:55:52 2011] Extracting stamp from image fullrun_mos1_xmm0504780201_pi300-10000_cl_sm2.00.img.gz, (220, 230) - (337, 347)
[Sat Sep 24 21:55:52 2011] XMMSAS bgd. selection expression = annulus(24168.825200, 25019.605400, 3392.120098, 6784.240195, X, Y) && !ellipse(25745.939800, 22933.161600, 336.042410, 336.042410, 0.000000, X, Y) && !ellipse(23249.372000, 26296.534000, 1249.928036, 1249.928036, 0.000000, X, Y) && !ellipse(25821.900200, 29099.843800, 305.448009, 305.448009, 0.000000, X, Y) && !ellipse(17665.101440, 28696.963226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24279.248000, 26509.382000, 860.568025, 860.568025, 0.000000, X, Y) && !ellipse(25777.579460, 26393.051200, 492.259214, 492.259214, 0.000000, X, Y) && !ellipse(19132.531400, 24903.722000, 526.473615, 526.473615, 0.000000, X, Y) && !ellipse(25706.678070, 25268.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27630.002533, 20307.491470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21884.740829, 25698.386414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19030.755000, 28898.827200, 414.663212, 414.663212, 0.000000, X, Y) && !ellipse(25810.779114, 24572.492035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23185.239227, 27079.259186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25208.129944, 23038.923218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22722.210083, 26825.361389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25220.135986, 26899.078278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26240.434000, 25377.473400, 1073.864031, 1073.864031, 0.000000, X, Y)
[Sat Sep 24 21:55:52 2011] Writing fullrun_mos1_xmm0504780201_pi300-10000_pass1_cl_src2.gif
[Sat Sep 24 21:56:00 2011] Mean detx,y = (220.96, -200.72) 
[Sat Sep 24 21:56:02 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 21:56:38 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 21:56:38 2011] Setting source spectrum file to fullrun_mos1_xmm0504780201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Sep 24 21:56:38 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504780201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Sep 25 03:15:00 2011] Updating aperture counts using extracted products
[Sun Sep 25 03:15:00 2011] Error reading totcts from fullrun_mos1_xmm0504780201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Sep 25 03:15:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 03:15:00 2011] Using photon index=1.80, rate=0.11, arf fullrun_mos1_xmm0504780201_pi300-10000_pass1_cl_src2.arf
[Sun Sep 25 03:15:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 03:15:00 2011] Updating source flux to 1e-12
[Sun Sep 25 03:16:52 2011] Reading fit data from xmm0504780201/analysis//spectral/fullrun_mos1_xmm0504780201_pi300-10000_pass1_cl_src2_pl.csv
[Sun Sep 25 03:16:52 2011] Spectral fit parameter nH value = 4.96491e+21
[Sun Sep 25 03:16:52 2011] Spectral fit parameter PhoIndex value = 4.13465
[Sun Sep 25 03:16:52 2011] Failed to get F(0.3-8.0) from xmm0504780201/analysis//spectral/fullrun_mos1_xmm0504780201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 03:16:52 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 03:16:52 2011] Using Nh = 5e+21, photon index=4.13, rate=0.11, arf fullrun_mos1_xmm0504780201_pi300-10000_pass1_cl_src2.arf
[Sun Sep 25 03:16:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 03:16:52 2011] Updating source flux to 6.8e-13