[Wed Jun 26 00:57:39 2013] Detection parameters:
  Position = (297.1, 304.0) = 1 52 39.27 36 10 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2332.0 +/- 90.6
  Background counts = 2099.9
  Rate = 0.03 +/- 0.001

[Wed Jun 26 00:57:42 2013] Off-axis axis estimate = 0.41'
[Wed Jun 26 01:08:17 2013] Using EEF radius (= 6.63 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 01:08:17 2013] Initial guess for spatial extent in simple fitting = 6.63"
[Wed Jun 26 01:08:17 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.975
[Wed Jun 26 01:08:17 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 6.63"
[Wed Jun 26 02:42:04 2013] fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jun 26 02:42:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_src14.csv
[Wed Jun 26 02:42:04 2013] fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jun 26 02:42:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_src14.csv
[Wed Jun 26 02:42:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 02:42:04 2013] fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jun 26 02:42:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Jun 26 02:42:04 2013] fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jun 26 02:42:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Jun 26 02:42:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 06:56:08 2013] Source 18 is offset by 5.384150 and -4.293256 pixels which is larger than
2 X fitted extent = 1.421710 x 1.421710, not incorporating fit results
[Wed Jun 26 06:56:08 2013] Spatial fit model total counts = 15466.400000, observed total counts = 15380.000000
[Wed Jun 26 06:56:08 2013] Offset between fit and detection position for source 18 = 3.521346 pixels
[Wed Jun 26 06:56:08 2013] Warning, changing simple spatial fit ID from 14 to 34
[Wed Jun 26 06:56:08 2013] 15201.368000 total counts/ 14911.300000 bgd. counts: snr = 2.375429
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.521346 pixels
  Position = (300.6, 304.6) = 1 52 38.02 36 10 19.6
  Extent = 13.9 (13.9-27.9)", rotation angle = 0
  Source counts = 290.1 +/- 123.3
  Background counts = 14911.3
  Rate = 0.004 +/- 0.002
[Wed Jun 26 06:56:08 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 06:56:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 06:56:08 2013] Assessing source extent using major axis lower bound
[Wed Jun 26 06:56:08 2013] Source does appear to be extended
[Wed Jun 26 06:56:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 06:56:08 2013] Source is confused with source 39
[Wed Jun 26 06:56:08 2013] Source is confused with source 40
[Wed Jun 26 06:56:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 26 06:56:36 2013] Initial guess for spatial extent in simple fitting = 13.93"
[Wed Jun 26 06:56:36 2013] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.894
[Wed Jun 26 06:56:36 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 13.93"
[Wed Jun 26 09:22:23 2013] fullrun_pn_xmm0504780101_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jun 26 09:22:23 2013] fullrun_pn_xmm0504780101_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jun 26 09:22:23 2013] Fit fullrun_pn_xmm0504780101_pi300-10000_cl_pass1_src13 appears to have run properly
[Wed Jun 26 09:22:23 2013] fullrun_pn_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jun 26 09:22:23 2013] fullrun_pn_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jun 26 09:22:23 2013] Fit fullrun_pn_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Jun 26 12:52:46 2013] Source 18 is offset by 3.588782 and 0.696582 pixels which is larger than
2 X fitted extent = 2.562520 x 2.562520, not incorporating fit results
[Wed Jun 26 12:52:46 2013] Source 18 is offset by 2.951862 and -3.969747 pixels which is larger than
2 X fitted extent = 0.804276 x 5.432276, not incorporating fit results
[Wed Jun 26 12:52:46 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 12:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 12:52:46 2013] Assessing source extent using major axis lower bound
[Wed Jun 26 12:52:46 2013] Source does appear to be extended
[Wed Jun 26 12:52:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 12:53:09 2013] XMMSAS src. selection expression = ellipse(26103.358000, 26451.358000, 835.710024, 835.710024, 0.000000, X, Y)
[Wed Jun 26 12:53:09 2013] Writing source region out to fullrun_pn_xmm0504780101_pi300-10000_pass1_cl_src18_src.reg
[Wed Jun 26 12:53:09 2013] Extracting stamp from image fullrun_pn_xmm0504780101_pi300-10000_cl_sm2.00.img.gz, (253, 257) - (349, 353)
[Wed Jun 26 12:53:09 2013] XMMSAS bgd. selection expression = annulus(26103.358000, 26451.358000, 1392.850040, 2785.700080, X, Y) && !ellipse(24201.864800, 25005.587400, 3473.808100, 3473.808100, 0.000000, X, Y) && !ellipse(24090.121002, 23593.173859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26904.438782, 25327.948761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23413.473511, 23817.138855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25938.273621, 23288.655273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22346.464000, 24399.598000, 1342.456039, 1342.456039, 0.000000, X, Y) && !ellipse(25867.992140, 29083.869000, 403.723212, 403.723212, 0.000000, X, Y) && !ellipse(22791.044000, 28195.222000, 928.688027, 928.688027, 0.000000, X, Y) && !ellipse(23095.286835, 27696.253479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23239.412800, 27168.212000, 1250.928036, 1250.928036, 0.000000, X, Y) && !ellipse(25787.359100, 25615.634460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.278168, 24668.139465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26447.030334, 23956.246460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25133.319183, 23070.911011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26571.450317, 29746.238770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.960846, 27775.567169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24396.235260, 27783.094177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26132.496979, 27262.804016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26722.468384, 26916.397034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.894775, 24574.148773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27530.462830, 24055.979980, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 26 12:53:09 2013] Writing fullrun_pn_xmm0504780101_pi300-10000_pass1_cl_src18.gif
[Wed Jun 26 13:27:51 2013] Mean detx,y = (-947.77, 1971.69) 
[Wed Jun 26 13:27:53 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 26 13:28:07 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 26 13:28:08 2013] Setting source spectrum file to fullrun_pn_xmm0504780101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jun 26 13:28:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0504780101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Jun 27 03:39:38 2013] Updating aperture counts using extracted products
[Thu Jun 27 03:39:38 2013] Total counts from fullrun_pn_xmm0504780101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 22829.00
[Thu Jun 27 03:39:38 2013] Total counts from fullrun_pn_xmm0504780101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 31133.00
[Thu Jun 27 03:39:38 2013] Got source and background scale factors 2188800.000000, 5470593.000000
[Thu Jun 27 03:39:38 2013] User source parameters:
  Position = (300.6, 304.6) = 1 52 38.02 36 10 19.6
  Extent = 13.9 (13.9-27.9)", rotation angle = 0
  Source aperture counts = 10372.6 +/- 152.1
  Background aperture counts = 12456.4
  Rate = 0.1 +/- 0.002

[Thu Jun 27 03:39:45 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 03:39:45 2013] Using photon index=1.80, rate=0.00393, arf fullrun_pn_xmm0504780101_pi300-10000_pass1_cl_src18.arf
[Thu Jun 27 03:39:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 27 03:39:45 2013] Updating source flux to 1.3e-14
[Thu Jun 27 03:40:13 2013] Flag b found in src. 18 procflags, skipping spectral fitting
[Thu Jun 27 03:40:13 2013] Flag c found in src. 18 procflags, skipping spectral fitting
[Thu Jun 27 03:40:19 2013] xmm0504780101/analysis//spectral/fullrun_pn_xmm0504780101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete