[Wed Jun 26 00:57:47 2013] Detection parameters:
  Position = (269.0, 291.2) = 1 52 49.37 36 9 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3231.0 +/- 82.4
  Background counts = 873.3
  Rate = 0.03 +/- 0.0008

[Wed Jun 26 00:57:51 2013] Off-axis axis estimate = 2.20'
[Wed Jun 26 05:08:55 2013] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 05:08:55 2013] Initial guess for spatial extent in simple fitting = 7.53"
[Wed Jun 26 05:08:55 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.704
[Wed Jun 26 05:08:55 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.53"
[Wed Jun 26 06:55:57 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 26 06:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src3.csv
[Wed Jun 26 06:55:57 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 26 06:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src3.csv
[Wed Jun 26 06:55:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 06:55:58 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 26 06:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun 26 06:55:58 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 26 06:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun 26 06:55:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 06:56:21 2013] Spatial fit model total counts = 21827.800000, observed total counts = 25814.000000
[Wed Jun 26 06:56:21 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 26 06:56:21 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 06:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 06:56:21 2013] Assessing source extent using major
[Wed Jun 26 06:56:21 2013] Source does appear to be extended
[Wed Jun 26 06:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 10:34:05 2013] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 10:34:05 2013] Initial guess for spatial extent in simple fitting = 7.53"
[Wed Jun 26 10:34:05 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.704
[Wed Jun 26 10:34:05 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.53"
[Wed Jun 26 12:52:35 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun 26 12:52:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src3.csv
[Wed Jun 26 12:52:35 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun 26 12:52:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src3.csv
[Wed Jun 26 12:52:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 12:52:36 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun 26 12:52:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jun 26 12:52:36 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun 26 12:52:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jun 26 12:52:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 12:52:56 2013] Warning, spatial fit 3 centroid is now closest to src. 19
[Wed Jun 26 12:52:56 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 12:52:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 12:52:56 2013] Assessing source extent using major
[Wed Jun 26 12:52:56 2013] Source does appear to be extended
[Wed Jun 26 12:52:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 12:52:56 2013] Source is confused with source 1
[Thu Jun 27 01:27:31 2013] Counts = 3231.007812, rescaling region sizes by 2.000000
[Thu Jun 27 01:27:31 2013] XMMSAS src. selection expression = ellipse(23354.306183, 25286.400208, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 27 01:27:31 2013] Writing source region out to fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src7_src.reg
[Thu Jun 27 01:27:31 2013] Extracting stamp from image fullrun_mos2_xmm0504780101_pi300-10000_cl_sm2.00.img.gz, (194, 216) - (344, 366)
[Thu Jun 27 01:27:31 2013] XMMSAS bgd. selection expression = annulus(23354.306183, 25286.400208, 4350.000000, 8700.000000, X, Y) && !ellipse(24204.744200, 24964.707400, 5142.744148, 3965.952114, 62.196300, X, Y) && !ellipse(24982.038269, 28186.106384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25788.605422, 22939.439400, 283.644808, 283.644808, 0.000000, X, Y) && !ellipse(25886.598720, 29090.019600, 414.871212, 313.939209, 22.408600, X, Y) && !ellipse(25401.612549, 23407.576691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17718.673294, 28750.751465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25790.434750, 26385.572600, 478.896014, 478.896014, 0.000000, X, Y) && !ellipse(22913.021729, 26649.319672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24542.458344, 27444.846100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21997.248000, 25991.969800, 797.880823, 797.880823, 0.000000, X, Y) && !ellipse(30034.718323, 22266.662811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27702.117820, 20290.312600, 279.384008, 279.384008, 0.000000, X, Y) && !ellipse(19024.091461, 28901.281006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26242.367401, 25873.490906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19140.370600, 24914.728200, 424.708012, 284.952808, 122.479249, X, Y) && !ellipse(22940.869400, 27771.390000, 1754.872050, 1754.872050, 0.000000, X, Y) && !ellipse(22782.929800, 28179.652000, 1281.304037, 473.567214, 244.713000, X, Y) && !ellipse(26380.804000, 24321.094000, 1112.064032, 375.804011, 238.282000, X, Y) && !ellipse(26243.631195, 23093.898254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21811.947891, 27514.482208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21516.003723, 26487.466431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25704.041200, 28248.028000, 1156.744033, 1156.744033, 0.000000, X, Y) && !ellipse(27594.926941, 25343.735565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21483.998000, 23212.588000, 1327.824038, 1327.824038, 0.000000, X, Y)
[Thu Jun 27 01:27:31 2013] Writing fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src7.gif
[Thu Jun 27 01:32:51 2013] Mean detx,y = (-505.59, 41.87) 
[Thu Jun 27 01:32:54 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 27 01:34:36 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 27 01:34:36 2013] Setting source spectrum file to fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jun 27 01:34:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jun 27 01:59:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 27 01:59:03 2013] rmf not generated due to insufficient counts
[Thu Jun 27 03:39:53 2013] Updating aperture counts using extracted products
[Thu Jun 27 03:39:53 2013] Total counts from fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 76340.00
[Thu Jun 27 03:39:53 2013] Total counts from fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 268404.00
[Thu Jun 27 03:39:53 2013] Got source and background scale factors 4957204.000000, 145600351.000000
[Thu Jun 27 03:39:53 2013] User source parameters:
  Position = (269.0, 291.2) = 1 52 49.37 36 9 21.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 67201.7 +/- 277.3
  Background aperture counts = 9138.3
  Rate = 0.6 +/- 0.002

[Thu Jun 27 03:39:53 2013] Updating counts from extracted products
[Thu Jun 27 03:39:53 2013] Set source signif. to 67201.74/95.59 = 702.99
[Thu Jun 27 03:39:57 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 03:39:57 2013] Using photon index=1.80, rate=0.575, arf fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src7.arf
[Thu Jun 27 03:39:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 27 03:39:57 2013] Updating source flux to 5.8e-12
[Thu Jun 27 03:40:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 27 03:40:13 2013] xmm0504780101/analysis//spectral/fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete