[Wed Jun 26 00:57:47 2013] Detection parameters:
  Position = (298.1, 334.8) = 1 52 38.92 36 12 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1257.2 +/- 51.2
  Background counts = 577.0
  Rate = 0.01 +/- 0.0005

[Wed Jun 26 00:57:51 2013] Off-axis axis estimate = 2.64'
[Wed Jun 26 05:08:55 2013] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 05:08:55 2013] Initial guess for spatial extent in simple fitting = 7.75"
[Wed Jun 26 05:08:55 2013] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.673
[Wed Jun 26 05:08:55 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.75"
[Wed Jun 26 06:55:57 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 26 06:55:57 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 26 06:55:57 2013] Fit fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src5 appears to have run properly
[Wed Jun 26 06:55:58 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 26 06:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 26 06:55:58 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 26 06:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 26 06:55:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 06:56:21 2013] Spatial fit model total counts = 6306.420000, observed total counts = 5760.000000
[Wed Jun 26 06:56:21 2013] Offset between fit and detection position for source 3 = 0.131613 pixels
[Wed Jun 26 06:56:21 2013] 6230.092000 total counts/ 5481.870000 bgd. counts: snr = 10.105693
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.131613 pixels
  Position = (298.1, 334.9) = 1 52 38.92 36 12 31.5
  Extent = 5.2 (4.5-6.1)" x 3.9 (3.5-4.4)", rotation angle = 202 (184-222) degrees
  Source counts = 748.2 +/- 78.9
  Background counts = 5481.9
  Rate = 0.006 +/- 0.0007
[Wed Jun 26 06:56:21 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 06:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 06:56:21 2013] Assessing source extent using major axis lower bound
[Wed Jun 26 06:56:21 2013] Source does appear to be extended
[Wed Jun 26 06:56:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Wed Jun 26 06:56:21 2013] Source is confused with source 32
[Wed Jun 26 10:34:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 26 10:34:05 2013] Initial guess for spatial extent in simple fitting = 4.56"
[Wed Jun 26 10:34:05 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.940
[Wed Jun 26 10:34:05 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 4.56"
[Wed Jun 26 12:52:35 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jun 26 12:52:35 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jun 26 12:52:35 2013] Fit fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed Jun 26 12:52:36 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun 26 12:52:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jun 26 12:52:36 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun 26 12:52:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jun 26 12:52:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 12:52:56 2013] Spatial fit model total counts = 6309.710000, observed total counts = 5760.000000
[Wed Jun 26 12:52:56 2013] Offset between fit and detection position for source 3 = 0.005367 pixels
[Wed Jun 26 12:52:56 2013] 6233.680000 total counts/ 5485.290000 bgd. counts: snr = 10.104811
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.005367 pixels
  Position = (298.1, 334.9) = 1 52 38.92 36 12 31.5
  Extent = 5.2 (4.5-6.1)" x 3.9 (3.5-4.4)", rotation angle = 22 (4-40) degrees
  Source counts = 748.4 +/- 79.0
  Background counts = 5485.3
  Rate = 0.006 +/- 0.0007
[Wed Jun 26 12:52:56 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 12:52:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 12:52:56 2013] Assessing source extent using major axis lower bound
[Wed Jun 26 12:52:56 2013] Source does appear to be extended
[Wed Jun 26 12:52:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Thu Jun 27 01:27:31 2013] XMMSAS src. selection expression = ellipse(25886.598720, 29090.019600, 311.153409, 235.454407, 22.408600, X, Y)
[Thu Jun 27 01:27:31 2013] Writing source region out to fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 27 01:27:31 2013] Extracting stamp from image fullrun_mos2_xmm0504780101_pi300-10000_cl_sm2.00.img.gz, (280, 317) - (316, 353)
[Thu Jun 27 01:27:31 2013] XMMSAS bgd. selection expression = annulus(25886.598720, 29090.019600, 518.589015, 1037.178030, X, Y) && !ellipse(24204.744200, 24964.707400, 5142.744148, 3965.952114, 62.196300, X, Y) && !ellipse(24982.038269, 28186.106384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24542.458344, 27444.846100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25704.041200, 28248.028000, 1156.744033, 1156.744033, 0.000000, X, Y)
[Thu Jun 27 01:27:31 2013] Writing fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src3.gif
[Thu Jun 27 01:35:03 2013] Mean detx,y = (-276.50, -4437.28) 
[Thu Jun 27 01:35:04 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 27 01:35:10 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 27 01:35:10 2013] Setting source spectrum file to fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 27 01:35:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 27 03:39:53 2013] Updating aperture counts using extracted products
[Thu Jun 27 03:39:53 2013] Total counts from fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1385.00
[Thu Jun 27 03:39:53 2013] Total counts from fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1076.00
[Thu Jun 27 03:39:53 2013] Got source and background scale factors 220572.000000, 437784.000000
[Thu Jun 27 03:39:53 2013] User source parameters:
  Position = (298.1, 334.9) = 1 52 38.92 36 12 31.5
  Extent = 5.2 (4.5-6.1)" x 3.9 (3.5-4.4)", rotation angle = 22 (4-40) degrees
  Source aperture counts = 842.9 +/- 38.2
  Background aperture counts = 542.1
  Rate = 0.007 +/- 0.0003

[Thu Jun 27 03:39:57 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 03:39:57 2013] Using photon index=1.80, rate=0.0064, arf fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src3.arf
[Thu Jun 27 03:39:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 27 03:39:57 2013] Updating source flux to 9.8e-14
[Thu Jun 27 03:40:07 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Thu Jun 27 03:40:13 2013] xmm0504780101/analysis//spectral/fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete