[Wed Jun 26 00:57:48 2013] Detection parameters:
  Position = (157.2, 345.5) = 1 53 29.56 36 13 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 309.1 +/- 27.6
  Background counts = 223.1
  Rate = 0.003 +/- 0.0002

[Wed Jun 26 00:57:51 2013] Off-axis axis estimate = 10.79'
[Wed Jun 26 05:08:55 2013] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 05:08:55 2013] Initial guess for spatial extent in simple fitting = 11.82"
[Wed Jun 26 05:08:55 2013] source mask rpix=2.7, npix_max = 41, mask sum = 30, frac = 0.724
[Wed Jun 26 05:08:55 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 11.82"
[Wed Jun 26 06:55:58 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src28.ximg exists
[Wed Jun 26 06:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src28.csv
[Wed Jun 26 06:55:58 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Jun 26 06:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src28.csv
[Wed Jun 26 06:55:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 06:55:59 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Jun 26 06:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Jun 26 06:55:59 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Jun 26 06:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Jun 26 06:55:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 06:56:21 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 10.714814 pixels away
[Wed Jun 26 06:56:21 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 06:56:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 06:56:21 2013] Assessing source extent using major
[Wed Jun 26 06:56:21 2013] Source does appear to be extended
[Wed Jun 26 06:56:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 10:34:05 2013] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 10:34:05 2013] Initial guess for spatial extent in simple fitting = 11.82"
[Wed Jun 26 10:34:05 2013] source mask rpix=2.7, npix_max = 41, mask sum = 30, frac = 0.724
[Wed Jun 26 10:34:05 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.82"
[Wed Jun 26 12:52:36 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src25.ximg exists
[Wed Jun 26 12:52:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src25.csv
[Wed Jun 26 12:52:36 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed Jun 26 12:52:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src25.csv
[Wed Jun 26 12:52:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 12:52:36 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed Jun 26 12:52:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed Jun 26 12:52:36 2013] fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Jun 26 12:52:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed Jun 26 12:52:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 12:52:56 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 15.891116 pixels away
[Wed Jun 26 12:52:56 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 12:52:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 12:52:56 2013] Assessing source extent using major
[Wed Jun 26 12:52:56 2013] Source does appear to be extended
[Wed Jun 26 12:52:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 27 01:27:32 2013] XMMSAS src. selection expression = ellipse(13631.267639, 30011.035461, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 27 01:27:32 2013] Writing source region out to fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 27 01:27:32 2013] Extracting stamp from image fullrun_mos2_xmm0504780101_pi300-10000_cl_sm2.00.img.gz, (120, 308) - (195, 383)
[Thu Jun 27 01:27:32 2013] XMMSAS bgd. selection expression = annulus(13631.267639, 30011.035461, 1087.500000, 2175.000000, X, Y)
[Thu Jun 27 01:27:32 2013] Writing fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src12.gif
[Thu Jun 27 01:51:26 2013] Mean detx,y = (-11596.86, 250.26) 
[Thu Jun 27 01:51:28 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 27 01:51:35 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 27 01:51:36 2013] Setting source spectrum file to fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 27 01:51:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 27 03:26:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 27 03:26:15 2013] rmf not generated due to insufficient counts
[Thu Jun 27 03:39:56 2013] Updating aperture counts using extracted products
[Thu Jun 27 03:39:56 2013] Total counts from fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 1566.00
[Thu Jun 27 03:39:56 2013] Total counts from fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 12324.00
[Thu Jun 27 03:39:56 2013] Got source and background scale factors 1145224.000000, 10772812.000000
[Thu Jun 27 03:39:56 2013] User source parameters:
  Position = (157.2, 345.5) = 1 53 29.56 36 13 16.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 255.9 +/- 40.6
  Background aperture counts = 1310.1
  Rate = 0.002 +/- 0.0003

[Thu Jun 27 03:39:56 2013] Updating counts from extracted products
[Thu Jun 27 03:39:56 2013] Set source signif. to 255.87/36.20 = 7.07
[Thu Jun 27 03:39:58 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 03:39:58 2013] Using photon index=1.80, rate=0.00219, arf fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src12.arf
[Thu Jun 27 03:39:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 27 03:39:58 2013] Updating source flux to 4.3e-14
[Thu Jun 27 03:40:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 27 03:40:13 2013] xmm0504780101/analysis//spectral/fullrun_mos2_xmm0504780101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete