[Wed Jun 26 00:57:45 2013] Detection parameters:
  Position = (256.7, 205.2) = 1 52 53.77 36 3 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 314.0 +/- 33.5
  Background counts = 338.7
  Rate = 0.004 +/- 0.0004

[Wed Jun 26 00:57:46 2013] Off-axis axis estimate = 7.41'
[Wed Jun 26 02:42:05 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 02:42:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 26 02:42:05 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Wed Jun 26 02:42:05 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.124
[Wed Jun 26 02:42:05 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.13"
[Wed Jun 26 05:08:53 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src19.ximg exists
[Wed Jun 26 05:08:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src19.csv
[Wed Jun 26 05:08:53 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Jun 26 05:08:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src19.csv
[Wed Jun 26 05:08:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 05:08:54 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Jun 26 05:08:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed Jun 26 05:08:54 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Jun 26 05:08:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed Jun 26 05:08:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 06:56:15 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 12.621413 pixels away
[Wed Jun 26 06:56:15 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 06:56:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 06:56:15 2013] Assessing source extent using major
[Wed Jun 26 06:56:15 2013] Source does appear to be extended
[Wed Jun 26 06:56:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 09:22:24 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 09:22:24 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Wed Jun 26 09:22:24 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.124
[Wed Jun 26 09:22:24 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 10.13"
[Wed Jun 26 10:34:05 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_src19.ximg exists
[Wed Jun 26 10:34:05 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Jun 26 10:34:05 2013] Fit fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_src19 appears to have run properly
[Wed Jun 26 10:34:05 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Jun 26 10:34:05 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Jun 26 10:34:05 2013] Fit fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Jun 26 12:52:51 2013] Spatial fit model total counts = 4045.730000, observed total counts = 4005.000000
[Wed Jun 26 12:52:51 2013] Offset between fit and detection position for source 33 = 0.778385 pixels
[Wed Jun 26 12:52:51 2013] 4085.688000 total counts/ 3810.110000 bgd. counts: snr = 4.464530
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.778385 pixels
  Position = (257.1, 205.8) = 1 52 53.63 36 3 9.9
  Extent = 11.0 (7.5-15.5)" x 5.7 (3.8-8.3)", rotation angle = 120 (94-140) degrees
  Source counts = 275.6 +/- 63.9
  Background counts = 3810.1
  Rate = 0.002 +/- 0.0005
[Wed Jun 26 12:52:52 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 12:52:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 12:52:52 2013] Assessing source extent using major axis lower bound
[Wed Jun 26 12:52:52 2013] Source does appear to be extended
[Wed Jun 26 12:52:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90
[Thu Jun 27 00:10:13 2013] XMMSAS src. selection expression = ellipse(22318.659400, 17858.317760, 657.120019, 343.851010, 120.183444, X, Y)
[Thu Jun 27 00:10:13 2013] Writing source region out to fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src33_src.reg
[Thu Jun 27 00:10:13 2013] Extracting stamp from image fullrun_mos1_xmm0504780101_pi300-10000_cl_sm2.00.img.gz, (219, 168) - (295, 244)
[Thu Jun 27 00:10:13 2013] XMMSAS bgd. selection expression = annulus(22318.659400, 17858.317760, 1095.200032, 2190.400063, X, Y) && !ellipse(24203.018000, 24983.672000, 4989.744144, 4054.152117, 61.300100, X, Y)
[Thu Jun 27 00:10:13 2013] Writing fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src33.gif
[Thu Jun 27 00:19:12 2013] Mean detx,y = (7406.68, -1763.83) 
[Thu Jun 27 00:19:13 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 27 00:19:23 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 27 00:19:23 2013] Setting source spectrum file to fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Jun 27 00:19:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Thu Jun 27 03:39:49 2013] Updating aperture counts using extracted products
[Thu Jun 27 03:39:49 2013] Total counts from fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 1665.00
[Thu Jun 27 03:39:49 2013] Total counts from fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src33_bgd.pi.gz = 18205.00
[Thu Jun 27 03:39:49 2013] Got source and background scale factors 710400.000000, 10496014.000000
[Thu Jun 27 03:39:49 2013] User source parameters:
  Position = (257.1, 205.8) = 1 52 53.63 36 3 9.9
  Extent = 11.0 (7.5-15.5)" x 5.7 (3.8-8.3)", rotation angle = 120 (94-140) degrees
  Source aperture counts = 432.8 +/- 41.8
  Background aperture counts = 1232.2
  Rate = 0.004 +/- 0.0004

[Thu Jun 27 03:39:52 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 03:39:52 2013] Using photon index=1.80, rate=0.00236, arf fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src33.arf
[Thu Jun 27 03:39:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 27 03:39:52 2013] Updating source flux to 4.1e-14
[Thu Jun 27 03:40:07 2013] xmm0504780101/analysis//spectral/fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete