[Wed Jun 26 00:57:43 2013] Detection parameters:
  Position = (219.3, 332.8) = 1 53 7.25 36 12 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 390.3 +/- 32.8
  Background counts = 512.4
  Rate = 0.004 +/- 0.0004

[Wed Jun 26 00:57:46 2013] Off-axis axis estimate = 6.26'
[Wed Jun 26 02:42:05 2013] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 02:42:05 2013] Initial guess for spatial extent in simple fitting = 9.56"
[Wed Jun 26 02:42:05 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.791
[Wed Jun 26 02:42:05 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.56"
[Wed Jun 26 05:08:53 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src18.ximg exists
[Wed Jun 26 05:08:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src18.csv
[Wed Jun 26 05:08:53 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Jun 26 05:08:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src18.csv
[Wed Jun 26 05:08:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 05:08:54 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Jun 26 05:08:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Jun 26 05:08:54 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jun 26 05:08:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Jun 26 05:08:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 06:56:15 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.124110 pixels away
[Wed Jun 26 06:56:15 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 06:56:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 06:56:15 2013] Assessing source extent using major
[Wed Jun 26 06:56:15 2013] Source does appear to be extended
[Wed Jun 26 06:56:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 09:22:24 2013] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 09:22:24 2013] Initial guess for spatial extent in simple fitting = 9.56"
[Wed Jun 26 09:22:24 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.791
[Wed Jun 26 09:22:24 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 9.56"
[Wed Jun 26 10:34:05 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_src18.ximg exists
[Wed Jun 26 10:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_src18.csv
[Wed Jun 26 10:34:05 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Jun 26 10:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_src18.csv
[Wed Jun 26 10:34:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 10:34:05 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Jun 26 10:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 26 10:34:05 2013] fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Jun 26 10:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 26 10:34:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 12:52:51 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.124110 pixels away
[Wed Jun 26 12:52:52 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 12:52:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 12:52:52 2013] Assessing source extent using major
[Wed Jun 26 12:52:52 2013] Source does appear to be extended
[Wed Jun 26 12:52:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 27 00:10:13 2013] XMMSAS src. selection expression = ellipse(19028.201447, 28905.250275, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 27 00:10:13 2013] Writing source region out to fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 27 00:10:13 2013] Extracting stamp from image fullrun_mos1_xmm0504780101_pi300-10000_cl_sm2.00.img.gz, (182, 295) - (257, 370)
[Thu Jun 27 00:10:13 2013] XMMSAS bgd. selection expression = annulus(19028.201447, 28905.250275, 1087.500000, 2175.000000, X, Y) && !ellipse(24203.018000, 24983.672000, 4989.744144, 4054.152117, 61.300100, X, Y) && !ellipse(17724.920578, 28748.136261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21763.188278, 28198.266418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21438.914948, 26918.229004, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 27 00:10:13 2013] Writing fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src11.gif
[Thu Jun 27 00:18:44 2013] Mean detx,y = (-949.85, 6044.51) 
[Thu Jun 27 00:18:45 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 27 00:19:01 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 27 00:19:02 2013] Setting source spectrum file to fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 27 00:19:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 27 01:02:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 27 01:02:31 2013] rmf not generated due to insufficient counts
[Thu Jun 27 03:39:48 2013] Updating aperture counts using extracted products
[Thu Jun 27 03:39:49 2013] Total counts from fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 2866.00
[Thu Jun 27 03:39:49 2013] Total counts from fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 22290.00
[Thu Jun 27 03:39:49 2013] Got source and background scale factors 1101434.000000, 8542264.000000
[Thu Jun 27 03:39:49 2013] User source parameters:
  Position = (219.3, 332.8) = 1 53 7.25 36 12 23.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -8.1 +/- 54.5
  Background aperture counts = 2874.1
  Rate = -7e-05 +/- 0.0005

[Thu Jun 27 03:39:49 2013] Updating counts from extracted products
[Thu Jun 27 03:39:49 2013] Set source signif. to -8.06/53.61 = -0.15
[Thu Jun 27 03:39:52 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 03:39:52 2013] Using photon index=1.80, rate=-6.91e-05, arf fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src11.arf
[Thu Jun 27 03:39:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 27 03:39:52 2013] Updated flux is not positive, keeping original flux
[Thu Jun 27 03:40:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 27 03:40:07 2013] xmm0504780101/analysis//spectral/fullrun_mos1_xmm0504780101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete