[Tue Jan  3 04:10:34 2012] Detection parameters:
  Position = (299.8, 324.5) = 12 42 43.79 -63 3 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.8 +/- 21.8
  Background counts = 90.2
  Rate = 0.002 +/- 0.0004

[Tue Jan  3 04:10:35 2012] Off-axis axis estimate = 1.89'
[Tue Jan  3 06:02:32 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 06:02:32 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Tue Jan  3 06:02:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.675
[Tue Jan  3 06:02:32 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.37"
[Tue Jan  3 06:43:14 2012] fullrun_mos2_xmm0504730101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jan  3 06:43:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504730101_pi300-10000_cl_pass0_src4.csv
[Tue Jan  3 06:43:14 2012] fullrun_mos2_xmm0504730101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jan  3 06:43:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504730101_pi300-10000_cl_pass0_src4.csv
[Tue Jan  3 06:43:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504730101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504730101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 06:43:14 2012] fullrun_mos2_xmm0504730101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jan  3 06:43:14 2012] fullrun_mos2_xmm0504730101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jan  3 06:43:14 2012] Fit fullrun_mos2_xmm0504730101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Jan  3 06:43:30 2012] Source 11 is offset by 7.573022 and 4.684310 pixels which is larger than
2 X fitted extent = 2.640754 x 2.640754, not incorporating fit results
[Tue Jan  3 06:43:30 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 06:43:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 06:43:30 2012] Assessing source extent using major
[Tue Jan  3 06:43:30 2012] Source does appear to be extended
[Tue Jan  3 06:43:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 08:02:53 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 08:02:53 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Tue Jan  3 08:02:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.675
[Tue Jan  3 08:02:53 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.37"
[Tue Jan  3 08:31:25 2012] fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jan  3 08:31:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_src3.csv
[Tue Jan  3 08:31:25 2012] fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jan  3 08:31:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_src3.csv
[Tue Jan  3 08:31:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 08:31:26 2012] fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan  3 08:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jan  3 08:31:26 2012] fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan  3 08:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jan  3 08:31:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504730101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 08:31:35 2012] Source 11 is offset by 7.573022 and 4.674080 pixels which is larger than
2 X fitted extent = 2.537931 x 2.537931, not incorporating fit results
[Tue Jan  3 08:31:35 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 08:31:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 08:31:35 2012] Assessing source extent using major
[Tue Jan  3 08:31:35 2012] Source does appear to be extended
[Tue Jan  3 08:31:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 08:31:35 2012] Deleting source due to low Poisson probability 1.0