[Tue Jan  3 04:09:57 2012] Detection parameters:
  Position = (289.7, 319.2) = 12 42 50.22 -63 3 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63935.9 +/- 302.4
  Background counts = 83.3
  Rate = 0.8 +/- 0.004

[Tue Jan  3 04:09:59 2012] Off-axis axis estimate = 1.63'
[Tue Jan  3 05:08:07 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:08:07 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Jan  3 05:08:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Tue Jan  3 05:08:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Jan  3 06:02:31 2012] fullrun_mos1_xmm0504730101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jan  3 06:02:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504730101_pi300-10000_cl_pass0_src1.csv
[Tue Jan  3 06:02:31 2012] fullrun_mos1_xmm0504730101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jan  3 06:02:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504730101_pi300-10000_cl_pass0_src1.csv
[Tue Jan  3 06:02:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504730101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504730101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 06:02:31 2012] fullrun_mos1_xmm0504730101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan  3 06:02:31 2012] fullrun_mos1_xmm0504730101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan  3 06:02:31 2012] Fit fullrun_mos1_xmm0504730101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan  3 06:43:25 2012] Spatial fit model total counts = 55564.000000, observed total counts = 55564.000000
[Tue Jan  3 06:43:25 2012] Offset between fit and detection position for source 1 = 0.228627 pixels
[Tue Jan  3 06:43:25 2012] 55577.900000 total counts/ 11655.800000 bgd. counts: snr = 406.829140
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.228627 pixels
  Position = (289.6, 319.4) = 12 42 50.32 -63 3 32.6
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 43922.1 +/- 235.7
  Background counts = 11655.8
  Rate = 0.6 +/- 0.003
[Tue Jan  3 06:43:25 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 06:43:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 06:43:25 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 06:43:25 2012] Source does appear to be extended
[Tue Jan  3 06:43:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 07:11:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 07:11:47 2012] Initial guess for spatial extent in simple fitting = 5.43"
[Tue Jan  3 07:11:47 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.736
[Tue Jan  3 07:11:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.43"
[Tue Jan  3 08:02:52 2012] fullrun_mos1_xmm0504730101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan  3 08:02:52 2012] fullrun_mos1_xmm0504730101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan  3 08:02:52 2012] Fit fullrun_mos1_xmm0504730101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jan  3 08:02:53 2012] fullrun_mos1_xmm0504730101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan  3 08:02:53 2012] fullrun_mos1_xmm0504730101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan  3 08:02:53 2012] Fit fullrun_mos1_xmm0504730101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan  3 08:31:32 2012] Spatial fit model total counts = 55442.700000, observed total counts = 55447.000000
[Tue Jan  3 08:31:32 2012] Offset between fit and detection position for source 1 = 0.013655 pixels
[Tue Jan  3 08:31:32 2012] 55685.600000 total counts/ 12015.500000 bgd. counts: snr = 398.394434
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013655 pixels
  Position = (289.6, 319.4) = 12 42 50.33 -63 3 32.6
  Extent = 5.5 (5.4-5.5)" x 5.3 (5.3-5.4)", rotation angle = 90 (89-90) degrees
  Source counts = 43670.1 +/- 236.0
  Background counts = 12015.5
  Rate = 0.6 +/- 0.003
[Tue Jan  3 08:31:32 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 08:31:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 08:31:32 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 08:31:32 2012] Source does appear to be extended
[Tue Jan  3 08:31:32 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Tue Jan  3 09:54:21 2012] Counts = 43670.100000, rescaling region sizes by 3.000000
[Tue Jan  3 09:54:21 2012] XMMSAS src. selection expression = ellipse(25144.785600, 27738.836200, 985.735828, 953.913627, 90.000000, X, Y)
[Tue Jan  3 09:54:21 2012] Writing source region out to fullrun_mos1_xmm0504730101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jan  3 09:54:21 2012] Extracting stamp from image fullrun_mos1_xmm0504730101_pi300-10000_cl_sm2.00.img.gz, (233, 263) - (346, 376)
[Tue Jan  3 09:54:21 2012] XMMSAS bgd. selection expression = annulus(25144.785600, 27738.836200, 4928.679142, 9857.358284, X, Y) && !ellipse(33398.256600, 34020.128000, 329.542409, 329.542409, 0.000000, X, Y) && !ellipse(20152.152520, 35603.673640, 423.727212, 423.727212, 0.000000, X, Y) && !ellipse(26983.273200, 37213.325400, 467.785613, 467.785613, 0.000000, X, Y) && !ellipse(21309.927200, 37847.052400, 1879.152054, 1879.152054, 0.000000, X, Y) && !ellipse(17691.189758, 29915.637604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24376.607400, 36264.117600, 1148.178597, 1148.178597, 0.000000, X, Y)
[Tue Jan  3 09:54:21 2012] Writing fullrun_mos1_xmm0504730101_pi300-10000_pass1_cl_src1.gif
[Tue Jan  3 09:54:34 2012] Mean detx,y = (139.99, -129.75) 
[Tue Jan  3 09:54:36 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 09:57:23 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 09:57:23 2012] Setting source spectrum file to fullrun_mos1_xmm0504730101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan  3 09:57:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504730101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jan  3 10:48:35 2012] Updating aperture counts using extracted products
[Tue Jan  3 10:48:35 2012] Error reading totcts from fullrun_mos1_xmm0504730101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan  3 10:48:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 10:48:36 2012] Using photon index=1.80, rate=0.55, arf fullrun_mos1_xmm0504730101_pi300-10000_pass1_cl_src1.arf
[Tue Jan  3 10:48:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 10:48:36 2012] Updating source flux to 6.2e-12
[Tue Jan  3 10:51:56 2012] Reading fit data from xmm0504730101/analysis//spectral/fullrun_mos1_xmm0504730101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jan  3 10:51:56 2012] Spectral fit parameter nH value = 2.45273e+21
[Tue Jan  3 10:51:56 2012] Spectral fit parameter PhoIndex value = 1.54853
[Tue Jan  3 10:51:56 2012] Failed to get F(0.3-8.0) from xmm0504730101/analysis//spectral/fullrun_mos1_xmm0504730101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jan  3 10:51:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 10:51:56 2012] Using Nh = 2.5e+21, photon index=1.55, rate=0.55, arf fullrun_mos1_xmm0504730101_pi300-10000_pass1_cl_src1.arf
[Tue Jan  3 10:51:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 10:51:56 2012] Updating source flux to 7.8e-12