[Sat Mar 24 16:48:30 2012] Detection parameters:
  Position = (311.8, 317.9) = 18 9 51.05 -19 43 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36165.9 +/- 227.0
  Background counts = 134.1
  Rate = 0.5 +/- 0.003

[Sat Mar 24 16:48:32 2012] Off-axis axis estimate = 1.71'
[Sat Mar 24 16:56:01 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 16:56:01 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Mar 24 16:56:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Mar 24 16:56:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Mar 24 18:06:14 2012] fullrun_pn_xmm0504650201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 24 18:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504650201_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 18:06:14 2012] fullrun_pn_xmm0504650201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 24 18:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504650201_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 18:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504650201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504650201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 18:06:14 2012] fullrun_pn_xmm0504650201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 24 18:06:14 2012] fullrun_pn_xmm0504650201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 24 18:06:14 2012] Fit fullrun_pn_xmm0504650201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 24 19:58:47 2012] Spatial fit model total counts = 33212.900000, observed total counts = 32953.000000
[Sat Mar 24 19:58:47 2012] Offset between fit and detection position for source 2 = 0.151361 pixels
[Sat Mar 24 19:58:47 2012] 33221.130000 total counts/ 7712.030000 bgd. counts: snr = 290.476352
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.151361 pixels
  Position = (311.7, 317.8) = 18 9 51.09 -19 43 51.2
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 25509.1 +/- 182.3
  Background counts = 7712.0
  Rate = 0.4 +/- 0.003
[Sat Mar 24 19:58:47 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 19:58:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 19:58:47 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 19:58:47 2012] Source does appear to be extended
[Sat Mar 24 19:58:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 19:59:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 24 19:59:15 2012] Initial guess for spatial extent in simple fitting = 5.84"
[Sat Mar 24 19:59:15 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.178
[Sat Mar 24 19:59:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.84"
[Sat Mar 24 20:57:07 2012] fullrun_pn_xmm0504650201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 24 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504650201_pi300-10000_cl_pass1_src1.csv
[Sat Mar 24 20:57:07 2012] fullrun_pn_xmm0504650201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 24 20:57:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504650201_pi300-10000_cl_pass1_src1.csv
[Sat Mar 24 20:57:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504650201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504650201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 20:57:07 2012] fullrun_pn_xmm0504650201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 24 20:57:07 2012] fullrun_pn_xmm0504650201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 24 20:57:07 2012] Fit fullrun_pn_xmm0504650201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 24 22:15:31 2012] Spatial fit model total counts = 33212.900000, observed total counts = 32953.000000
[Sat Mar 24 22:15:31 2012] Offset between fit and detection position for source 2 = 0.000000 pixels
[Sat Mar 24 22:15:31 2012] 33221.130000 total counts/ 7712.030000 bgd. counts: snr = 290.476352
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000000 pixels
  Position = (311.7, 317.8) = 18 9 51.09 -19 43 51.2
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 25509.1 +/- 182.3
  Background counts = 7712.0
  Rate = 0.4 +/- 0.003
[Sat Mar 24 22:15:31 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 22:15:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 22:15:31 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 22:15:31 2012] Source does appear to be extended
[Sat Mar 24 22:15:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 22:15:54 2012] Counts = 25509.100000, rescaling region sizes by 3.000000
[Sat Mar 24 22:15:54 2012] XMMSAS src. selection expression = ellipse(27069.590600, 27604.376400, 1051.477230, 1051.477230, 0.000000, X, Y)
[Sat Mar 24 22:15:54 2012] Writing source region out to fullrun_pn_xmm0504650201_pi300-10000_pass1_cl_src2_src.reg
[Sat Mar 24 22:15:54 2012] Extracting stamp from image fullrun_pn_xmm0504650201_pi300-10000_cl_sm2.00.img.gz, (251, 257) - (372, 378)
[Sat Mar 24 22:15:54 2012] XMMSAS bgd. selection expression = annulus(27069.590600, 27604.376400, 5257.386151, 10514.772303, X, Y) && !ellipse(38254.994354, 23149.699005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33220.508064, 30498.986073, 832.032024, 417.383573, 223.917692, X, Y) && !ellipse(30358.007965, 30924.368195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29368.752600, 25356.109000, 415.983701, 415.983701, 0.000000, X, Y) && !ellipse(21742.478000, 22059.454000, 365.700811, 365.700811, 0.000000, X, Y) && !ellipse(30096.981415, 30982.298279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18769.533890, 36431.796356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31397.475830, 35998.198212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34300.686600, 35109.639800, 428.856812, 428.856812, 0.000000, X, Y) && !ellipse(33169.097229, 20532.056503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16745.245300, 35031.871094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21081.918381, 34618.634369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31369.846371, 34282.091423, 450.886996, 276.792313, 0.000000, X, Y) && !ellipse(19557.439056, 33910.575226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22608.248800, 33892.174200, 312.814409, 312.814409, 0.000000, X, Y) && !ellipse(34841.404602, 32273.600983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31877.762480, 30623.982800, 336.836810, 336.836810, 0.000000, X, Y) && !ellipse(37562.759800, 30023.315400, 411.864812, 411.864812, 0.000000, X, Y) && !ellipse(27911.371918, 29802.650177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33466.325104, 29034.324524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32230.430206, 23951.411652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33725.453308, 22173.837677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25883.964340, 22156.908400, 506.864815, 506.864815, 0.000000, X, Y) && !ellipse(16282.961600, 21183.240800, 356.784010, 356.784010, 0.000000, X, Y) && !ellipse(31158.334686, 21469.405304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25845.429901, 20663.172470, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 24 22:15:54 2012] Writing fullrun_pn_xmm0504650201_pi300-10000_pass1_cl_src2.gif
[Sat Mar 24 22:19:52 2012] Mean detx,y = (90.56, -202.52) 
[Sat Mar 24 22:20:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 22:27:27 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 22:27:27 2012] Setting source spectrum file to fullrun_pn_xmm0504650201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 24 22:27:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504650201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Mar 25 01:44:29 2012] Updating aperture counts using extracted products
[Sun Mar 25 01:44:29 2012] Error reading totcts from fullrun_pn_xmm0504650201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 25 01:44:31 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 01:44:31 2012] Using photon index=1.80, rate=0.352, arf fullrun_pn_xmm0504650201_pi300-10000_pass1_cl_src2.arf
[Sun Mar 25 01:44:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 01:44:31 2012] Updating source flux to 8.4e-13
[Sun Mar 25 01:47:55 2012] Reading fit data from xmm0504650201/analysis//spectral/fullrun_pn_xmm0504650201_pi300-10000_pass1_cl_src2_pl.csv
[Sun Mar 25 01:47:55 2012] Spectral fit parameter nH value = 1.15955e+22
[Sun Mar 25 01:47:55 2012] Spectral fit parameter PhoIndex value = 6.19493
[Sun Mar 25 01:47:55 2012] Failed to get F(0.3-8.0) from xmm0504650201/analysis//spectral/fullrun_pn_xmm0504650201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Mar 25 01:47:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 01:47:55 2012] Using Nh = 1.2e+22, photon index=6.19, rate=0.352, arf fullrun_pn_xmm0504650201_pi300-10000_pass1_cl_src2.arf
[Sun Mar 25 01:47:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 01:47:55 2012] Updating source flux to 6.4e-13