[Sat Mar 24 16:49:32 2012] Detection parameters:
  Position = (311.8, 317.9) = 18 9 51.06 -19 43 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13115.6 +/- 136.5
  Background counts = 52.0
  Rate = 0.2 +/- 0.002

[Sat Mar 24 16:49:33 2012] Off-axis axis estimate = 1.71'
[Sat Mar 24 18:50:54 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 18:50:54 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Mar 24 18:50:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Mar 24 18:50:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Mar 24 19:58:36 2012] fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 24 19:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 19:58:36 2012] fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 24 19:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 19:58:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 19:58:36 2012] fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 24 19:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Mar 24 19:58:36 2012] fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 24 19:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Mar 24 19:58:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504650201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 19:59:01 2012] Source 1 is offset by -6.881587 and 5.579646 pixels which is larger than
2 X fitted extent = 0.837264 x 0.837264, not incorporating fit results
[Sat Mar 24 19:59:01 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 19:59:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 19:59:01 2012] Assessing source extent using major
[Sat Mar 24 19:59:01 2012] Source does appear to be extended
[Sat Mar 24 19:59:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 21:21:43 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 21:21:43 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Mar 24 21:21:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Mar 24 21:21:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sat Mar 24 22:15:22 2012] fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 24 22:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_src1.csv
[Sat Mar 24 22:15:22 2012] fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 24 22:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_src1.csv
[Sat Mar 24 22:15:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 22:15:23 2012] fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 24 22:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Mar 24 22:15:23 2012] fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 24 22:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Mar 24 22:15:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504650201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 22:15:41 2012] Source 1 is offset by -4.963518 and 3.661577 pixels which is larger than
2 X fitted extent = 4.780046 x 4.780046, not incorporating fit results
[Sat Mar 24 22:15:41 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 22:15:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 22:15:41 2012] Assessing source extent using major
[Sat Mar 24 22:15:41 2012] Source does appear to be extended
[Sat Mar 24 22:15:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 00:55:11 2012] Counts = 13115.590820, rescaling region sizes by 3.000000
[Sun Mar 25 00:55:11 2012] XMMSAS src. selection expression = ellipse(27079.537964, 27607.193176, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun Mar 25 00:55:11 2012] Writing source region out to fullrun_mos2_xmm0504650201_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 25 00:55:11 2012] Extracting stamp from image fullrun_mos2_xmm0504650201_pi300-10000_cl_sm2.00.img.gz, (199, 205) - (424, 430)
[Sun Mar 25 00:55:11 2012] XMMSAS bgd. selection expression = annulus(27079.537964, 27607.193176, 9787.500000, 19575.000000, X, Y) && !ellipse(38282.716600, 23208.897000, 423.094412, 423.094412, 0.000000, X, Y) && !ellipse(24298.113342, 10638.820625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34064.500200, 15673.964600, 599.849617, 297.276809, 330.678876, X, Y) && !ellipse(24296.791138, 36900.355927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42005.483429, 22221.269775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33228.984070, 20284.779022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28049.566319, 16841.305466, 465.271385, 256.152283, 354.040740, X, Y) && !ellipse(35638.319758, 25188.256782, 391.792171, 275.063208, 332.919929, X, Y) && !ellipse(42622.396939, 31304.301113, 538.175657, 231.417497, 242.699563, X, Y) && !ellipse(34160.201740, 19852.140400, 327.841609, 196.356806, 359.609034, X, Y) && !ellipse(27428.936000, 19116.974800, 726.006421, 456.902413, 52.699773, X, Y) && !ellipse(25107.257416, 10743.092918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40795.628400, 22185.761800, 428.013612, 428.013612, 0.000000, X, Y) && !ellipse(40005.545200, 21877.184800, 495.455214, 495.455214, 0.000000, X, Y) && !ellipse(25830.168793, 20454.220337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18837.065620, 17291.293200, 730.343221, 279.455208, 38.288919, X, Y) && !ellipse(17415.247253, 40963.225128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37610.685120, 29989.333252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40116.122101, 17114.579788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21121.934982, 34665.540771, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 00:55:11 2012] Writing fullrun_mos2_xmm0504650201_pi300-10000_pass1_cl_src1.gif
[Sun Mar 25 00:55:37 2012] Mean detx,y = (68.62, 56.23) 
[Sun Mar 25 00:55:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 01:10:13 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 01:10:13 2012] Setting source spectrum file to fullrun_mos2_xmm0504650201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 25 01:10:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504650201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 25 01:22:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 01:22:04 2012] rmf not generated due to insufficient counts
[Sun Mar 25 01:44:34 2012] Updating aperture counts using extracted products
[Sun Mar 25 01:44:34 2012] Error reading totcts from fullrun_mos2_xmm0504650201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 25 01:44:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 01:44:35 2012] Using photon index=1.80, rate=0.185, arf fullrun_mos2_xmm0504650201_pi300-10000_pass1_cl_src1.arf
[Sun Mar 25 01:44:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 01:44:35 2012] Updating source flux to 1.8e-12
[Sun Mar 25 01:45:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Mar 25 01:46:06 2012] xmm0504650201/analysis//spectral/fullrun_mos2_xmm0504650201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete