[Fri Nov 25 02:34:16 2011] Detection parameters:
  Position = (260.2, 284.6) = 22 48 50.34 -44 32 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1625.3 +/- 50.9
  Background counts = 200.8
  Rate = 0.06 +/- 0.002

[Fri Nov 25 02:34:19 2011] Off-axis axis estimate = 2.95'
[Fri Nov 25 02:41:01 2011] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 02:41:01 2011] Initial guess for spatial extent in simple fitting = 7.90"
[Fri Nov 25 02:41:01 2011] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.885
[Fri Nov 25 02:41:01 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.90"
[Fri Nov 25 04:43:40 2011] fullrun_pn_xmm0504630101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Nov 25 04:43:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504630101_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 04:43:40 2011] fullrun_pn_xmm0504630101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Nov 25 04:43:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504630101_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 04:43:40 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504630101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504630101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 04:43:40 2011] fullrun_pn_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Nov 25 04:43:40 2011] fullrun_pn_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Nov 25 04:43:40 2011] Fit fullrun_pn_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Nov 25 06:55:56 2011] Warning, spatial fit 1 centroid is now closest to src. 6
[Fri Nov 25 06:55:56 2011] Source 1 is offset by -0.691834 and -1.562897 pixels which is larger than
2 X fitted extent = 0.890515 x 0.890515, not incorporating fit results
[Fri Nov 25 06:55:56 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 06:55:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 06:55:56 2011] Assessing source extent using major
[Fri Nov 25 06:55:56 2011] Source does appear to be extended
[Fri Nov 25 06:55:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 06:56:30 2011] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 06:56:30 2011] Initial guess for spatial extent in simple fitting = 7.90"
[Fri Nov 25 06:56:30 2011] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.885
[Fri Nov 25 06:56:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.90"
[Fri Nov 25 08:46:13 2011] fullrun_pn_xmm0504630101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 08:46:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504630101_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 08:46:13 2011] fullrun_pn_xmm0504630101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 08:46:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504630101_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 08:46:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504630101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504630101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 08:46:13 2011] fullrun_pn_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 08:46:13 2011] fullrun_pn_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 08:46:13 2011] Fit fullrun_pn_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 10:47:22 2011] Spatial fit model total counts = 7615.720000, observed total counts = 7627.000000
[Fri Nov 25 10:47:22 2011] Offset between fit and detection position for source 1 = 6.472076 pixels
[Fri Nov 25 10:47:22 2011] 6183.040000 total counts/ 4860.540000 bgd. counts: snr = 18.969392
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 6.472076 pixels
  Position = (255.0, 280.7) = 22 48 52.45 -44 32 27.7
  Extent = 15.8 (15.8-31.6)", rotation angle = 0
  Source counts = 1322.5 +/- 78.6
  Background counts = 4860.5
  Rate = 0.05 +/- 0.003
[Fri Nov 25 10:47:22 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 10:47:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 10:47:22 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 10:47:22 2011] Source does appear to be extended
[Fri Nov 25 10:47:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 10:47:22 2011] Source is confused with source 2
[Fri Nov 25 10:47:50 2011] Counts = 1322.500000, rescaling region sizes by 2.000000
[Fri Nov 25 10:47:50 2011] XMMSAS src. selection expression = ellipse(22136.306000, 24371.486000, 1896.876055, 1896.876055, 0.000000, X, Y)
[Fri Nov 25 10:47:50 2011] Writing source region out to fullrun_pn_xmm0504630101_pi300-10000_pass1_cl_src1_src.reg
[Fri Nov 25 10:47:50 2011] Extracting stamp from image fullrun_pn_xmm0504630101_pi300-10000_cl_sm2.00.img.gz, (146, 172) - (364, 390)
[Fri Nov 25 10:47:50 2011] XMMSAS bgd. selection expression = annulus(22136.306000, 24371.486000, 6322.920182, 12645.840364, X, Y) && !ellipse(22819.170000, 23288.472000, 2680.304077, 1151.816033, 113.741700, X, Y) && !ellipse(19052.088400, 21822.685000, 453.457613, 453.457613, 0.000000, X, Y) && !ellipse(16730.293503, 19618.808731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23775.954900, 25186.162220, 4539.360131, 4539.360131, 0.000000, X, Y) && !ellipse(25824.688812, 14707.868744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15501.565857, 34854.310699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22040.495468, 35849.208588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21898.451400, 33919.405620, 427.640812, 427.640812, 0.000000, X, Y) && !ellipse(20471.013397, 33899.570129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33931.613678, 28567.642059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14965.046829, 27996.924927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10855.876572, 25872.253662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27447.378360, 23780.801400, 283.420643, 283.420643, 0.000000, X, Y) && !ellipse(18094.989182, 19372.362274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28072.664400, 18152.043600, 404.600812, 404.600812, 0.000000, X, Y) && !ellipse(14171.800200, 13277.072600, 417.675212, 417.675212, 0.000000, X, Y) && !ellipse(17486.723297, 37018.727753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27771.191681, 35312.348389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32250.930600, 34635.572600, 417.675212, 417.675212, 0.000000, X, Y) && !ellipse(21873.413900, 32345.545400, 401.913612, 401.913612, 0.000000, X, Y) && !ellipse(17045.279541, 32207.480133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17943.077698, 26374.205536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12942.634018, 24565.530548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8001.814957, 22167.339981, 2238.008064, 1228.877938, 84.531857, X, Y) && !ellipse(22119.118851, 21645.180191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23563.936676, 32666.056793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26451.024349, 30810.335695, 429.145253, 356.675627, 108.026601, X, Y) && !ellipse(24068.408000, 27090.672000, 2358.656068, 2358.656068, 0.000000, X, Y) && !ellipse(25055.238000, 28227.246000, 1179.328034, 1179.328034, 0.000000, X, Y) && !ellipse(20919.581924, 27281.049377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25529.266000, 25703.870000, 1031.232030, 1031.232030, 0.000000, X, Y) && !ellipse(14306.994472, 24657.988000, 1614.320046, 1154.856033, 341.258000, X, Y) && !ellipse(26161.219086, 23342.570953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14232.647705, 23256.032928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23722.107391, 22851.446289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22107.690000, 22320.884000, 1340.152039, 1340.152039, 0.000000, X, Y)
[Fri Nov 25 10:47:50 2011] Writing fullrun_pn_xmm0504630101_pi300-10000_pass1_cl_src1.gif
[Fri Nov 25 10:48:21 2011] Mean detx,y = (757.53, -924.28) 
[Fri Nov 25 10:48:31 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 10:56:31 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 10:56:32 2011] Setting source spectrum file to fullrun_pn_xmm0504630101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 10:56:32 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504630101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Nov 27 01:19:40 2011] Updating aperture counts using extracted products
[Sun Nov 27 01:19:40 2011] Error reading totcts from fullrun_pn_xmm0504630101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Nov 27 01:19:46 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 01:19:46 2011] Using photon index=1.80, rate=0.0457, arf fullrun_pn_xmm0504630101_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 01:19:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 01:19:48 2011] Updating source flux to 1e-13
[Sun Nov 27 01:25:45 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Sun Nov 27 01:25:45 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Nov 27 01:30:56 2011] Reading fit data from xmm0504630101/analysis//spectral/fullrun_pn_xmm0504630101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Nov 27 01:30:56 2011] Spectral fit parameter nH value = 4.78478e+20
[Sun Nov 27 01:30:56 2011] Spectral fit parameter PhoIndex value = 1.71251
[Sun Nov 27 01:30:56 2011] Failed to get F(0.3-8.0) from xmm0504630101/analysis//spectral/fullrun_pn_xmm0504630101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Nov 27 01:30:56 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 01:30:56 2011] Using Nh = 4.8e+20, photon index=1.71, rate=0.0457, arf fullrun_pn_xmm0504630101_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 01:30:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 01:30:56 2011] Updating source flux to 1.2e-13