[Fri Nov 25 02:35:53 2011] Detection parameters:
  Position = (266.2, 293.4) = 22 48 47.88 -44 31 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2831.7 +/- 66.7
  Background counts = 107.0
  Rate = 0.07 +/- 0.002

[Fri Nov 25 02:35:54 2011] Off-axis axis estimate = 2.36'
[Fri Nov 25 05:41:31 2011] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 05:41:31 2011] Initial guess for spatial extent in simple fitting = 7.61"
[Fri Nov 25 05:41:31 2011] source mask rpix=1.7, npix_max = 20, mask sum = 19, frac = 0.939
[Fri Nov 25 05:41:31 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.61"
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Nov 25 06:55:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src2.csv
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Nov 25 06:55:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src2.csv
[Fri Nov 25 06:55:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Nov 25 06:55:42 2011] Fit fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Nov 25 06:56:11 2011] Spatial fit model total counts = 12169.900000, observed total counts = 12147.000000
[Fri Nov 25 06:56:11 2011] Offset between fit and detection position for source 5 = 7.393562 pixels
[Fri Nov 25 06:56:11 2011] 12591.270000 total counts/ 11011.700000 bgd. counts: snr = 15.052606
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 7.393562 pixels
  Position = (260.0, 297.4) = 22 48 50.42 -44 31 15.1
  Extent = 15.2 (15.2-30.4)", rotation angle = 0
  Source counts = 1579.6 +/- 112.2
  Background counts = 11011.7
  Rate = 0.04 +/- 0.003
[Fri Nov 25 06:56:12 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 06:56:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 06:56:12 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 06:56:12 2011] Source does appear to be extended
[Fri Nov 25 06:56:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 09:29:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 09:29:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 09:29:00 2011] Initial guess for spatial extent in simple fitting = 15.22"
[Fri Nov 25 09:29:00 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.001
[Fri Nov 25 09:29:00 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 15.22"
[Fri Nov 25 10:47:09 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Nov 25 10:47:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src2.csv
[Fri Nov 25 10:47:09 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Nov 25 10:47:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src2.csv
[Fri Nov 25 10:47:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 10:47:09 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Nov 25 10:47:09 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Nov 25 10:47:09 2011] Fit fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Nov 25 10:47:34 2011] Warning, spatial fit 2 centroid is now closest to src. 24
[Fri Nov 25 10:47:34 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 10:47:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 10:47:34 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 10:47:34 2011] Source does appear to be extended
[Fri Nov 25 10:47:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 21:27:17 2011] Counts = 1579.570000, rescaling region sizes by 2.000000
[Sat Nov 26 21:27:17 2011] XMMSAS src. selection expression = ellipse(22570.624000, 25823.424000, 1826.352053, 1826.352053, 0.000000, X, Y)
[Sat Nov 26 21:27:17 2011] Writing source region out to fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src5_src.reg
[Sat Nov 26 21:27:17 2011] Extracting stamp from image fullrun_mos2_xmm0504630101_pi300-10000_cl_sm2.00.img.gz, (155, 192) - (365, 402)
[Sat Nov 26 21:27:17 2011] XMMSAS bgd. selection expression = annulus(22570.624000, 25823.424000, 6087.840175, 12175.680350, X, Y) && !ellipse(23897.347600, 25110.531600, 4728.432136, 4728.432136, 0.000000, X, Y) && !ellipse(19070.237000, 21814.777000, 412.265612, 412.265612, 0.000000, X, Y) && !ellipse(15498.101044, 34853.774384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21930.691422, 34003.211853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11380.301200, 31861.544580, 434.664813, 434.664813, 0.000000, X, Y) && !ellipse(18103.173400, 19337.863800, 581.407217, 342.116010, 221.399661, X, Y) && !ellipse(20476.031403, 33863.366150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.002655, 23356.679779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25568.677612, 26198.931122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.014000, 27149.316000, 1987.216057, 1987.216057, 0.000000, X, Y)
[Sat Nov 26 21:27:17 2011] Writing fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src5.gif
[Sat Nov 26 21:34:07 2011] Mean detx,y = (-677.66, 236.30) 
[Sat Nov 26 21:34:11 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 21:40:02 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 21:40:02 2011] Setting source spectrum file to fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Nov 26 21:40:02 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Nov 27 01:19:53 2011] Updating aperture counts using extracted products
[Sun Nov 27 01:19:54 2011] Error reading totcts from fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Nov 27 01:19:54 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 01:19:54 2011] Using photon index=1.80, rate=0.0412, arf fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src5.arf
[Sun Nov 27 01:19:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 01:19:54 2011] Updating source flux to 3.5e-13