[Fri Nov 25 02:35:54 2011] Detection parameters:
  Position = (294.5, 123.7) = 22 48 36.40 -44 43 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.6 +/- 13.3
  Background counts = 32.7
  Rate = 0.002 +/- 0.0003

[Fri Nov 25 02:35:54 2011] Off-axis axis estimate = 12.67'
[Fri Nov 25 05:41:31 2011] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 05:41:31 2011] Initial guess for spatial extent in simple fitting = 12.77"
[Fri Nov 25 05:41:31 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.038
[Fri Nov 25 05:41:31 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 12.77"
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src31.ximg exists
[Fri Nov 25 06:55:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src31.csv
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri Nov 25 06:55:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src31.csv
[Fri Nov 25 06:55:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 06:55:43 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri Nov 25 06:55:43 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Nov 25 06:55:43 2011] Fit fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Nov 25 06:56:12 2011] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 13.004171 pixels away
[Fri Nov 25 06:56:12 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 06:56:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 06:56:12 2011] Assessing source extent using major
[Fri Nov 25 06:56:12 2011] Source does appear to be extended
[Fri Nov 25 06:56:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 09:29:00 2011] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 09:29:00 2011] Initial guess for spatial extent in simple fitting = 12.77"
[Fri Nov 25 09:29:00 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.038
[Fri Nov 25 09:29:00 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 12.77"
[Fri Nov 25 10:47:09 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src21.ximg exists
[Fri Nov 25 10:47:09 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src21.csv
[Fri Nov 25 10:47:09 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Nov 25 10:47:09 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src21.csv
[Fri Nov 25 10:47:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 10:47:10 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Nov 25 10:47:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri Nov 25 10:47:10 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Nov 25 10:47:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri Nov 25 10:47:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 10:47:34 2011] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 18.038120 pixels away
[Fri Nov 25 10:47:34 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 10:47:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 10:47:34 2011] Assessing source extent using major
[Fri Nov 25 10:47:34 2011] Source does appear to be extended
[Fri Nov 25 10:47:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 10:47:34 2011] Deleting source due to low Poisson probability 0.9