[Fri Nov 25 02:35:53 2011] Detection parameters:
  Position = (193.0, 227.1) = 22 49 17.75 -44 36 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 519.3 +/- 29.3
  Background counts = 43.6
  Rate = 0.02 +/- 0.001

[Fri Nov 25 02:35:54 2011] Off-axis axis estimate = 9.23'
[Fri Nov 25 05:41:31 2011] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 05:41:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 05:41:31 2011] Initial guess for spatial extent in simple fitting = 11.05"
[Fri Nov 25 05:41:31 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Fri Nov 25 05:41:31 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 11.05"
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Nov 25 06:55:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src4.csv
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Nov 25 06:55:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src4.csv
[Fri Nov 25 06:55:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Nov 25 06:55:42 2011] Fit fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Nov 25 06:56:11 2011] Warning, spatial fit 4 centroid is now closest to src. 37
[Fri Nov 25 06:56:12 2011] Spatial fit model total counts = 395.223000, observed total counts = 395.000000
[Fri Nov 25 06:56:12 2011] Offset between fit and detection position for source 3 = 5.398867 pixels
[Fri Nov 25 06:56:12 2011] Warning, changing simple spatial fit ID from 4 to 38
[Fri Nov 25 06:56:12 2011] 399.716700 total counts/ 353.852000 bgd. counts: snr = 2.438191
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.398867 pixels
  Position = (198.3, 226.3) = 22 49 15.57 -44 36 24.1
  Extent = 22.3 (14.3-44.6)" x 8.2 (8.2-8.2)", rotation angle = 2
  Source counts = 45.9 +/- 20.0
  Background counts = 353.9
  Rate = 0.001 +/- 0.0005
[Fri Nov 25 06:56:12 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 06:56:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 06:56:12 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 06:56:12 2011] Source does appear to be extended
[Fri Nov 25 06:56:12 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.75
[Fri Nov 25 06:56:12 2011] Source is asymmetric
[Fri Nov 25 06:56:12 2011] Deleting source due to low Poisson probability 0.9