[Fri Nov 25 02:35:53 2011] Detection parameters:
  Position = (275.0, 289.0) = 22 48 44.32 -44 31 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8430.4 +/- 111.4
  Background counts = 109.7
  Rate = 0.2 +/- 0.003

[Fri Nov 25 02:35:54 2011] Off-axis axis estimate = 1.83'
[Fri Nov 25 05:41:31 2011] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 05:41:31 2011] Initial guess for spatial extent in simple fitting = 7.34"
[Fri Nov 25 05:41:31 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Fri Nov 25 05:41:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Nov 25 06:55:42 2011] Fit fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Nov 25 06:55:42 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Nov 25 06:55:42 2011] Fit fullrun_mos2_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Nov 25 06:56:11 2011] Spatial fit model total counts = 20238.500000, observed total counts = 20232.000000
[Fri Nov 25 06:56:11 2011] Offset between fit and detection position for source 1 = 0.354860 pixels
[Fri Nov 25 06:56:11 2011] 20315.500000 total counts/ 10074.500000 bgd. counts: snr = 102.030641
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.354860 pixels
  Position = (275.3, 289.1) = 22 48 44.18 -44 31 51.4
  Extent = 14.7 (14.7-14.7)", rotation angle = 0
  Source counts = 10241.0 +/- 142.5
  Background counts = 10074.5
  Rate = 0.3 +/- 0.004
[Fri Nov 25 06:56:12 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 06:56:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 06:56:12 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 06:56:12 2011] Source does appear to be extended
[Fri Nov 25 06:56:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 09:29:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 09:29:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 09:29:00 2011] Initial guess for spatial extent in simple fitting = 14.68"
[Fri Nov 25 09:29:00 2011] source mask rpix=3.4, npix_max = 60, mask sum = 63, frac = 1.049
[Fri Nov 25 09:29:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.68"
[Fri Nov 25 10:47:09 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 10:47:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 10:47:09 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 10:47:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 10:47:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 10:47:09 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 10:47:09 2011] fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 10:47:09 2011] Fit fullrun_mos2_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 10:47:34 2011] Spatial fit model total counts = 33086.400000, observed total counts = 33084.000000
[Fri Nov 25 10:47:34 2011] Offset between fit and detection position for source 1 = 0.150848 pixels
[Fri Nov 25 10:47:34 2011] 33098.400000 total counts/ 15739.700000 bgd. counts: snr = 138.362682
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.150848 pixels
  Position = (275.2, 289.2) = 22 48 44.22 -44 31 50.8
  Extent = 19.7 (19.1-20.1)", rotation angle = 0
  Source counts = 17358.7 +/- 181.9
  Background counts = 15739.7
  Rate = 0.5 +/- 0.005
[Fri Nov 25 10:47:34 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 10:47:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 10:47:34 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 10:47:34 2011] Source does appear to be extended
[Fri Nov 25 10:47:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 21:27:16 2011] Counts = 17358.700000, rescaling region sizes by 3.000000
[Sat Nov 26 21:27:16 2011] XMMSAS src. selection expression = ellipse(23897.347600, 25110.531600, 3546.324102, 3546.324102, 0.000000, X, Y)
[Sat Nov 26 21:27:17 2011] Writing source region out to fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src1_src.reg
[Sat Nov 26 21:27:17 2011] Extracting stamp from image fullrun_mos2_xmm0504630101_pi300-10000_cl_sm2.00.img.gz, (71, 85) - (479, 493)
[Sat Nov 26 21:27:17 2011] XMMSAS bgd. selection expression = annulus(23897.347600, 25110.531600, 17731.620510, 35463.241020, X, Y) && !ellipse(22570.624000, 25823.424000, 1217.568035, 1217.568035, 0.000000, X, Y) && !ellipse(19070.237000, 21814.777000, 412.265612, 412.265612, 0.000000, X, Y) && !ellipse(15498.101044, 34853.774384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21930.691422, 34003.211853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11380.301200, 31861.544580, 434.664813, 434.664813, 0.000000, X, Y) && !ellipse(37433.899994, 18760.571838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18103.173400, 19337.863800, 581.407217, 342.116010, 221.399661, X, Y) && !ellipse(20476.031403, 33863.366150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.002655, 23356.679779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25568.677612, 26198.931122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.014000, 27149.316000, 1987.216057, 1987.216057, 0.000000, X, Y)
[Sat Nov 26 21:27:17 2011] Writing fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src1.gif
[Sat Nov 26 21:27:27 2011] Mean detx,y = (-127.64, 163.15) 
[Sat Nov 26 21:27:30 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 21:33:56 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 21:33:56 2011] Setting source spectrum file to fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Nov 26 21:33:56 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Nov 27 01:19:53 2011] Updating aperture counts using extracted products
[Sun Nov 27 01:19:53 2011] Error reading totcts from fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Nov 27 01:19:54 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 01:19:54 2011] Using photon index=1.80, rate=0.453, arf fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 01:19:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 01:19:54 2011] Updating source flux to 3.7e-12
[Sun Nov 27 01:25:45 2011] Reading fit data from xmm0504630101/analysis//spectral/fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Nov 27 01:25:45 2011] Spectral fit parameter nH value = 1.55336e+20
[Sun Nov 27 01:25:45 2011] Spectral fit parameter PhoIndex value = 1.47745
[Sun Nov 27 01:25:45 2011] Failed to get F(0.3-8.0) from xmm0504630101/analysis//spectral/fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Nov 27 01:25:45 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 01:25:45 2011] Using Nh = 1.6e+20, photon index=1.48, rate=0.453, arf fullrun_mos2_xmm0504630101_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 01:25:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 01:25:45 2011] Updating source flux to 4.5e-12