[Fri Nov 25 02:35:00 2011] Detection parameters:
  Position = (257.4, 278.9) = 22 48 51.47 -44 32 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 599.5 +/- 261.1
  Background counts = 111.6
  Rate = 0.02 +/- 0.007

[Fri Nov 25 02:35:01 2011] Off-axis axis estimate = 3.30'
[Fri Nov 25 04:43:41 2011] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 04:43:41 2011] Initial guess for spatial extent in simple fitting = 8.08"
[Fri Nov 25 04:43:41 2011] source mask rpix=1.9, npix_max = 22, mask sum = 23, frac = 1.035
[Fri Nov 25 04:43:41 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 8.08"
[Fri Nov 25 05:41:30 2011] fullrun_mos1_xmm0504630101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Nov 25 05:41:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504630101_pi300-10000_cl_pass0_src4.csv
[Fri Nov 25 05:41:30 2011] fullrun_mos1_xmm0504630101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Nov 25 05:41:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504630101_pi300-10000_cl_pass0_src4.csv
[Fri Nov 25 05:41:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504630101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504630101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 05:41:30 2011] fullrun_mos1_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Nov 25 05:41:30 2011] fullrun_mos1_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Nov 25 05:41:30 2011] Fit fullrun_mos1_xmm0504630101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Nov 25 06:56:02 2011] Source 5 is offset by -5.843686 and -5.651610 pixels which is larger than
2 X fitted extent = 5.645012 x 5.645012, not incorporating fit results
[Fri Nov 25 06:56:02 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 06:56:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 06:56:02 2011] Assessing source extent using major
[Fri Nov 25 06:56:02 2011] Source does appear to be extended
[Fri Nov 25 06:56:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 06:56:02 2011] Source is confused with source 19
[Fri Nov 25 08:46:14 2011] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 08:46:14 2011] Initial guess for spatial extent in simple fitting = 8.08"
[Fri Nov 25 08:46:14 2011] source mask rpix=1.9, npix_max = 22, mask sum = 23, frac = 1.035
[Fri Nov 25 08:46:14 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 8.08"
[Fri Nov 25 09:29:00 2011] fullrun_mos1_xmm0504630101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Nov 25 09:29:00 2011] fullrun_mos1_xmm0504630101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Nov 25 09:29:00 2011] Fit fullrun_mos1_xmm0504630101_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Nov 25 09:29:00 2011] fullrun_mos1_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Nov 25 09:29:00 2011] fullrun_mos1_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Nov 25 09:29:00 2011] Fit fullrun_mos1_xmm0504630101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Nov 25 10:47:27 2011] Warning, spatial fit 4 centroid is now closest to src. 19
[Fri Nov 25 10:47:27 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.333060 pixels away
[Fri Nov 25 10:47:27 2011] Spatial fit model total counts = 1998.460000, observed total counts = 1998.000000
[Fri Nov 25 10:47:27 2011] Offset between fit and detection position for source 5 = 3.383518 pixels
[Fri Nov 25 10:47:27 2011] Warning, changing simple spatial fit ID from 4 to 10
[Fri Nov 25 10:47:27 2011] 2040.400000 total counts/ 1587.440000 bgd. counts: snr = 11.368710
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.383518 pixels
  Position = (260.8, 279.1) = 22 48 50.10 -44 32 34.6
  Extent = 26.1 (17.3-32.3)", rotation angle = 0
  Source counts = 453.0 +/- 45.2
  Background counts = 1587.4
  Rate = 0.01 +/- 0.001
[Fri Nov 25 10:47:27 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 10:47:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 10:47:27 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 10:47:27 2011] Source does appear to be extended
[Fri Nov 25 10:47:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 16:41:41 2011] XMMSAS src. selection expression = ellipse(22639.388000, 24234.816000, 1567.470045, 1567.470045, 0.000000, X, Y)
[Sat Nov 26 16:41:41 2011] Writing source region out to fullrun_mos1_xmm0504630101_pi300-10000_pass1_cl_src5_src.reg
[Sat Nov 26 16:41:41 2011] Extracting stamp from image fullrun_mos1_xmm0504630101_pi300-10000_cl_sm2.00.img.gz, (171, 189) - (351, 369)
[Sat Nov 26 16:41:41 2011] XMMSAS bgd. selection expression = annulus(22639.388000, 24234.816000, 2612.450075, 5224.900150, X, Y) && !ellipse(23773.299400, 25211.585200, 6591.096190, 6591.096190, 0.000000, X, Y) && !ellipse(19060.453415, 21808.491043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22944.506000, 22983.704000, 1263.592036, 1263.592036, 0.000000, X, Y) && !ellipse(18091.662430, 19381.134491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21677.752000, 23686.900000, 1292.264037, 1292.264037, 0.000000, X, Y) && !ellipse(26235.742000, 23139.120000, 1187.816034, 1187.816034, 0.000000, X, Y) && !ellipse(27845.696000, 18096.686600, 1464.896042, 421.792012, 150.233000, X, Y)
[Sat Nov 26 16:41:41 2011] Writing fullrun_mos1_xmm0504630101_pi300-10000_pass1_cl_src5.gif
[Sat Nov 26 16:44:59 2011] Mean detx,y = (1048.26, 214.53) 
[Sat Nov 26 16:45:02 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 16:45:33 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 16:45:34 2011] Setting source spectrum file to fullrun_mos1_xmm0504630101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Nov 26 16:45:34 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504630101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Nov 27 01:19:52 2011] Updating aperture counts using extracted products
[Sun Nov 27 01:19:52 2011] Error reading totcts from fullrun_mos1_xmm0504630101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Nov 27 01:19:52 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 01:19:52 2011] Using photon index=1.80, rate=0.0118, arf fullrun_mos1_xmm0504630101_pi300-10000_pass1_cl_src5.arf
[Sun Nov 27 01:19:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 01:19:53 2011] Updating source flux to 1e-13
[Sun Nov 27 01:19:56 2011] Flag b found in src. 5 procflags, skipping spectral fitting
[Sun Nov 27 01:19:56 2011] Flag c found in src. 5 procflags, skipping spectral fitting