[Fri Dec  2 18:41:44 2011] Detection parameters:
  Position = (434.9, 167.8) = 23 12 39.12 0 26 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.3 +/- 19.2
  Background counts = 99.8
  Rate = 0.007 +/- 0.001

[Fri Dec  2 18:41:44 2011] Off-axis axis estimate = 13.69'
[Fri Dec  2 18:46:48 2011] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 18:46:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec  2 18:46:48 2011] Initial guess for spatial extent in simple fitting = 13.27"
[Fri Dec  2 18:46:48 2011] source mask rpix=3.1, npix_max = 50, mask sum = 47, frac = 0.931
[Fri Dec  2 18:46:48 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 13.27"
[Fri Dec  2 18:55:01 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Dec  2 18:55:01 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Dec  2 18:55:01 2011] Fit fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_src5 appears to have run properly
[Fri Dec  2 18:55:01 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Dec  2 18:55:01 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Dec  2 18:55:01 2011] Fit fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Dec  2 18:59:55 2011] Spatial fit model total counts = 744.856000, observed total counts = 742.000000
[Fri Dec  2 18:59:55 2011] Offset between fit and detection position for source 6 = 5.531994 pixels
[Fri Dec  2 18:59:55 2011] 713.075000 total counts/ 349.652000 bgd. counts: snr = 19.435441
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 5.531994 pixels
  Position = (439.7, 170.5) = 23 12 37.72 0 26 23.9
  Extent = 26.5 (23.2-53.1)", rotation angle = 0
  Source counts = 363.4 +/- 26.7
  Background counts = 349.7
  Rate = 0.05 +/- 0.003
[Fri Dec  2 18:59:55 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 18:59:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 18:59:55 2011] Assessing source extent using major axis lower bound
[Fri Dec  2 18:59:55 2011] Source does appear to be extended
[Fri Dec  2 18:59:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 19:01:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec  2 19:01:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec  2 19:01:21 2011] Initial guess for spatial extent in simple fitting = 26.55"
[Fri Dec  2 19:01:21 2011] source mask rpix=6.1, npix_max = 174, mask sum = 146, frac = 0.837
[Fri Dec  2 19:01:21 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 26.55"
[Fri Dec  2 19:09:41 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Dec  2 19:09:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_src4.csv
[Fri Dec  2 19:09:41 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Dec  2 19:09:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_src4.csv
[Fri Dec  2 19:09:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 19:09:41 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Dec  2 19:09:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Dec  2 19:09:41 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Dec  2 19:09:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Dec  2 19:09:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 19:15:02 2011] Warning, spatial fit 4 centroid is now closest to src. 5
[Fri Dec  2 19:15:02 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 19:15:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 19:15:02 2011] Assessing source extent using major axis lower bound
[Fri Dec  2 19:15:02 2011] Source does appear to be extended
[Fri Dec  2 19:15:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 19:15:31 2011] XMMSAS src. selection expression = ellipse(38206.694000, 14787.062400, 1592.964046, 1592.964046, 0.000000, X, Y)
[Fri Dec  2 19:15:31 2011] Writing source region out to fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src6_src.reg
[Fri Dec  2 19:15:31 2011] Extracting stamp from image fullrun_mos1_xmm0504621101_pi300-10000_cl_sm2.00.img.gz, (348, 79) - (531, 262)
[Fri Dec  2 19:15:31 2011] XMMSAS bgd. selection expression = annulus(38206.694000, 14787.062400, 2654.940076, 5309.880153, X, Y)
[Fri Dec  2 19:15:31 2011] Writing fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src6.gif
[Fri Dec  2 19:16:12 2011] Mean detx,y = (4212.56, -16379.70) 
[Fri Dec  2 19:16:13 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec  2 19:16:59 2011] Binned source spectrum to 10 counts/bin
[Fri Dec  2 19:16:59 2011] Setting source spectrum file to fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Dec  2 19:16:59 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Dec  2 19:26:37 2011] Updating aperture counts using extracted products
[Fri Dec  2 19:26:37 2011] Error reading totcts from fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Dec  2 19:26:37 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec  2 19:26:37 2011] Using photon index=1.80, rate=0.0457, arf fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src6.arf
[Fri Dec  2 19:26:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec  2 19:26:37 2011] Updating source flux to 1.5e-12