[Fri Dec  2 18:41:44 2011] Detection parameters:
  Position = (330.2, 172.7) = 23 13 9.49 0 26 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.9 +/- 25.2
  Background counts = 143.7
  Rate = 0.01 +/- 0.002

[Fri Dec  2 18:41:44 2011] Off-axis axis estimate = 9.40'
[Fri Dec  2 18:46:48 2011] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 18:46:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec  2 18:46:48 2011] Initial guess for spatial extent in simple fitting = 11.13"
[Fri Dec  2 18:46:48 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.962
[Fri Dec  2 18:46:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 11.13"
[Fri Dec  2 18:55:01 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec  2 18:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_src1.csv
[Fri Dec  2 18:55:01 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec  2 18:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_src1.csv
[Fri Dec  2 18:55:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 18:55:01 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec  2 18:55:01 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec  2 18:55:01 2011] Fit fullrun_mos1_xmm0504621101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec  2 18:59:55 2011] Spatial fit model total counts = 1166.000000, observed total counts = 1166.000000
[Fri Dec  2 18:59:55 2011] Offset between fit and detection position for source 1 = 0.496974 pixels
[Fri Dec  2 18:59:55 2011] 1171.329000 total counts/ 1061.570000 bgd. counts: snr = 3.368727
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.496974 pixels
  Position = (329.9, 173.1) = 23 13 9.56 0 26 35.1
  Extent = 7.0 (5.2-9.0)", rotation angle = 0
  Source counts = 109.8 +/- 34.2
  Background counts = 1061.6
  Rate = 0.01 +/- 0.004
[Fri Dec  2 18:59:55 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 18:59:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 18:59:55 2011] Assessing source extent using major axis lower bound
[Fri Dec  2 18:59:55 2011] Source does appear to be extended
[Fri Dec  2 18:59:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 19:01:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec  2 19:01:21 2011] Initial guess for spatial extent in simple fitting = 7.04"
[Fri Dec  2 19:01:21 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Fri Dec  2 19:01:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.04"
[Fri Dec  2 19:09:41 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec  2 19:09:41 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec  2 19:09:41 2011] Fit fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Dec  2 19:09:41 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec  2 19:09:41 2011] fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec  2 19:09:41 2011] Fit fullrun_mos1_xmm0504621101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec  2 19:15:02 2011] Spatial fit model total counts = 739.000000, observed total counts = 739.000000
[Fri Dec  2 19:15:02 2011] Offset between fit and detection position for source 1 = 0.115110 pixels
[Fri Dec  2 19:15:02 2011] 737.234000 total counts/ 631.803000 bgd. counts: snr = 4.194474
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.115110 pixels
  Position = (330.0, 173.1) = 23 13 9.53 0 26 35.1
  Extent = 6.8 (5.0-8.9)", rotation angle = 0
  Source counts = 105.4 +/- 27.2
  Background counts = 631.8
  Rate = 0.01 +/- 0.003
[Fri Dec  2 19:15:02 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 19:15:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 19:15:02 2011] Assessing source extent using major axis lower bound
[Fri Dec  2 19:15:02 2011] Source does appear to be extended
[Fri Dec  2 19:15:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 19:15:31 2011] XMMSAS src. selection expression = ellipse(28664.519280, 15010.627000, 408.575412, 408.575412, 0.000000, X, Y)
[Fri Dec  2 19:15:31 2011] Writing source region out to fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec  2 19:15:31 2011] Extracting stamp from image fullrun_mos1_xmm0504621101_pi300-10000_cl_sm2.00.img.gz, (307, 150) - (354, 197)
[Fri Dec  2 19:15:31 2011] XMMSAS bgd. selection expression = annulus(28664.519280, 15010.627000, 680.959020, 1361.918039, X, Y)
[Fri Dec  2 19:15:31 2011] Writing fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src1.gif
[Fri Dec  2 19:15:34 2011] Mean detx,y = (7691.23, -7996.11) 
[Fri Dec  2 19:15:35 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec  2 19:15:47 2011] Binned source spectrum to 10 counts/bin
[Fri Dec  2 19:15:48 2011] Setting source spectrum file to fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec  2 19:15:48 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec  2 19:26:37 2011] Updating aperture counts using extracted products
[Fri Dec  2 19:26:37 2011] Error reading totcts from fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec  2 19:26:37 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec  2 19:26:37 2011] Using photon index=1.80, rate=0.0133, arf fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src1.arf
[Fri Dec  2 19:26:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec  2 19:26:37 2011] Updating source flux to 2.9e-13
[Fri Dec  2 19:27:09 2011] Reading fit data from xmm0504621101/analysis//spectral/fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec  2 19:27:09 2011] Spectral fit parameter nH value = 2.64503e+21
[Fri Dec  2 19:27:09 2011] Spectral fit parameter PhoIndex value = 3.77312
[Fri Dec  2 19:27:09 2011] Failed to get F(0.3-8.0) from xmm0504621101/analysis//spectral/fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec  2 19:27:09 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec  2 19:27:09 2011] Using Nh = 2.6e+21, photon index=3.77, rate=0.0133, arf fullrun_mos1_xmm0504621101_pi300-10000_pass1_cl_src1.arf
[Fri Dec  2 19:27:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec  2 19:27:09 2011] Updating source flux to 2e-13