[Sun Dec 18 10:46:44 2011] Detection parameters:
  Position = (164.1, 191.0) = 9 39 51.19 41 18 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.1 +/- 12.7
  Background counts = 47.8
  Rate = 0.003 +/- 0.0006

[Sun Dec 18 10:46:45 2011] Off-axis axis estimate = 12.47'
[Sun Dec 18 11:17:58 2011] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 11:17:58 2011] Initial guess for spatial extent in simple fitting = 12.66"
[Sun Dec 18 11:17:58 2011] source mask rpix=2.9, npix_max = 46, mask sum = 37, frac = 0.795
[Sun Dec 18 11:17:58 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 12.66"
[Sun Dec 18 11:45:45 2011] fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_src8.ximg exists
[Sun Dec 18 11:45:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_src8.csv
[Sun Dec 18 11:45:45 2011] fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Dec 18 11:45:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_src8.csv
[Sun Dec 18 11:45:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 11:45:45 2011] fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Dec 18 11:45:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Dec 18 11:45:45 2011] fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Dec 18 11:45:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Dec 18 11:45:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504621001_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 11:45:55 2011] Spatial fit model total counts = 27.366800, observed total counts = 47.000000
[Sun Dec 18 11:45:55 2011] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Dec 18 11:45:55 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 11:45:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 11:45:55 2011] Assessing source extent using major
[Sun Dec 18 11:45:55 2011] Source does appear to be extended
[Sun Dec 18 11:45:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 12:13:29 2011] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 12:13:29 2011] Initial guess for spatial extent in simple fitting = 12.66"
[Sun Dec 18 12:13:29 2011] source mask rpix=2.9, npix_max = 46, mask sum = 37, frac = 0.795
[Sun Dec 18 12:13:29 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 12.66"
[Sun Dec 18 12:35:12 2011] fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_src7.ximg exists
[Sun Dec 18 12:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_src7.csv
[Sun Dec 18 12:35:12 2011] fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Dec 18 12:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_src7.csv
[Sun Dec 18 12:35:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 12:35:12 2011] fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Dec 18 12:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Dec 18 12:35:12 2011] fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Dec 18 12:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Dec 18 12:35:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504621001_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 12:35:21 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 124.363570 pixels away
[Sun Dec 18 12:35:21 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.279479 pixels away
[Sun Dec 18 12:35:21 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 12:35:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 12:35:21 2011] Assessing source extent using major
[Sun Dec 18 12:35:21 2011] Source does appear to be extended
[Sun Dec 18 12:35:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 12:55:16 2011] XMMSAS src. selection expression = ellipse(14232.549469, 16568.606201, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 18 12:55:16 2011] Writing source region out to fullrun_mos2_xmm0504621001_pi300-10000_pass1_cl_src2_src.reg
[Sun Dec 18 12:55:16 2011] Extracting stamp from image fullrun_mos2_xmm0504621001_pi300-10000_cl_sm2.00.img.gz, (127, 154) - (202, 229)
[Sun Dec 18 12:55:16 2011] XMMSAS bgd. selection expression = annulus(14232.549469, 16568.606201, 1087.500000, 2175.000000, X, Y)
[Sun Dec 18 12:55:16 2011] Writing fullrun_mos2_xmm0504621001_pi300-10000_pass1_cl_src2.gif
[Sun Dec 18 12:57:58 2011] Mean detx,y = (15281.53, -6270.86) 
[Sun Dec 18 12:58:01 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 12:58:34 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 12:58:34 2011] Setting source spectrum file to fullrun_mos2_xmm0504621001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Dec 18 12:58:34 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504621001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Dec 18 13:05:35 2011] Not generating rmf since there are only 56 counts
[Sun Dec 18 13:05:35 2011] rmf not generated due to insufficient counts
[Sun Dec 18 13:06:34 2011] Updating aperture counts using extracted products
[Sun Dec 18 13:06:34 2011] Error reading totcts from fullrun_mos2_xmm0504621001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Dec 18 13:06:35 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 13:06:35 2011] Using photon index=1.80, rate=0.00284, arf fullrun_mos2_xmm0504621001_pi300-10000_pass1_cl_src2.arf
[Sun Dec 18 13:06:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 13:06:35 2011] Updating source flux to 1.1e-13
[Sun Dec 18 13:06:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting