[Thu Nov 24 02:17:42 2011] Detection parameters:
  Position = (344.9, 392.6) = 10 30 54.75 38 15 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.7 +/- 17.0
  Background counts = 26.0
  Rate = 0.006 +/- 0.0007

[Thu Nov 24 02:17:42 2011] Off-axis axis estimate = 7.61'
[Thu Nov 24 02:46:36 2011] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:46:36 2011] Initial guess for spatial extent in simple fitting = 10.23"
[Thu Nov 24 02:46:36 2011] source mask rpix=2.4, npix_max = 32, mask sum = 21, frac = 0.645
[Thu Nov 24 02:46:36 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.23"
[Thu Nov 24 03:03:27 2011] fullrun_mos2_xmm0504620301_pi300-10000_cl_pass0_src6.ximg exists
[Thu Nov 24 03:03:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504620301_pi300-10000_cl_pass0_src6.csv
[Thu Nov 24 03:03:27 2011] fullrun_mos2_xmm0504620301_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Nov 24 03:03:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504620301_pi300-10000_cl_pass0_src6.csv
[Thu Nov 24 03:03:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504620301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504620301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 03:03:27 2011] fullrun_mos2_xmm0504620301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Nov 24 03:03:27 2011] fullrun_mos2_xmm0504620301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Nov 24 03:03:27 2011] Fit fullrun_mos2_xmm0504620301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Nov 24 03:03:33 2011] Spatial fit model total counts = 234.993000, observed total counts = 235.000000
[Thu Nov 24 03:03:33 2011] Offset between fit and detection position for source 6 = 1.173115 pixels
[Thu Nov 24 03:03:33 2011] 235.973900 total counts/ 180.503000 bgd. counts: snr = 4.128792
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.173115 pixels
  Position = (344.9, 393.7) = 10 30 54.77 38 15 57.5
  Extent = 3.1 (2.6-4.0)", rotation angle = 0
  Source counts = 55.5 +/- 15.4
  Background counts = 180.5
  Rate = 0.003 +/- 0.0008
[Thu Nov 24 03:03:33 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 03:03:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 03:03:33 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 03:03:33 2011] Source does appear to be extended
[Thu Nov 24 03:03:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 03:27:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 03:27:46 2011] Initial guess for spatial extent in simple fitting = 3.13"
[Thu Nov 24 03:27:46 2011] source mask rpix=0.7, npix_max = 5, mask sum = 2, frac = 0.336
[Thu Nov 24 03:27:46 2011] Skipping simple spatial due to low active detector fraction
[Thu Nov 24 03:44:16 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 03:44:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 03:44:16 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 03:44:16 2011] Source does appear to be extended
[Thu Nov 24 03:44:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 04:13:30 2011] XMMSAS src. selection expression = ellipse(29954.633000, 34207.545400, 187.929605, 187.929605, 0.000000, X, Y)
[Thu Nov 24 04:13:30 2011] Writing source region out to fullrun_mos2_xmm0504620301_pi300-10000_pass1_cl_src6_src.reg
[Thu Nov 24 04:13:30 2011] Extracting stamp from image fullrun_mos2_xmm0504620301_pi300-10000_cl_sm2.00.img.gz, (334, 383) - (356, 405)
[Thu Nov 24 04:13:30 2011] XMMSAS bgd. selection expression = annulus(29954.633000, 34207.545400, 313.216009, 626.432018, X, Y)
[Thu Nov 24 04:13:30 2011] Writing fullrun_mos2_xmm0504620301_pi300-10000_pass1_cl_src6.gif
[Thu Nov 24 04:14:47 2011] Mean detx,y = (8860.92, -6745.52) 
[Thu Nov 24 04:14:48 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 04:14:57 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 04:14:57 2011] Setting source spectrum file to fullrun_mos2_xmm0504620301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Nov 24 04:14:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504620301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Nov 24 04:30:53 2011] Not generating rmf since there are only 55 counts
[Thu Nov 24 04:30:53 2011] rmf not generated due to insufficient counts
[Thu Nov 24 04:31:49 2011] Updating aperture counts using extracted products
[Thu Nov 24 04:31:49 2011] Error reading totcts from fullrun_mos2_xmm0504620301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Nov 24 04:31:49 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 04:31:49 2011] Using photon index=1.80, rate=0.00272, arf fullrun_mos2_xmm0504620301_pi300-10000_pass1_cl_src6.arf
[Thu Nov 24 04:31:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 04:31:50 2011] Updating source flux to 1.2e-13
[Thu Nov 24 04:32:08 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting