[Fri Feb 24 05:57:18 2012] Detection parameters:
  Position = (295.5, 322.1) = 13 2 47.62 -63 50 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58088.5 +/- 282.7
  Background counts = 52.4
  Rate = 8 +/- 0.04

[Fri Feb 24 05:57:18 2012] Off-axis axis estimate = 1.73'
[Fri Feb 24 06:01:23 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 06:01:23 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Feb 24 06:01:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Fri Feb 24 06:01:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Feb 24 06:10:45 2012] fullrun_pn_xmm0504550701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 24 06:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504550701_pi300-10000_cl_pass0_src1.csv
[Fri Feb 24 06:10:45 2012] fullrun_pn_xmm0504550701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 24 06:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504550701_pi300-10000_cl_pass0_src1.csv
[Fri Feb 24 06:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504550701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504550701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 06:10:45 2012] fullrun_pn_xmm0504550701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 06:10:45 2012] fullrun_pn_xmm0504550701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 06:10:45 2012] Fit fullrun_pn_xmm0504550701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 06:50:02 2012] Spatial fit model total counts = 51906.900000, observed total counts = 51862.000000
[Fri Feb 24 06:50:02 2012] Offset between fit and detection position for source 1 = 0.115132 pixels
[Fri Feb 24 06:50:02 2012] 52060.200000 total counts/ 10556.200000 bgd. counts: snr = 403.957941
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.115132 pixels
  Position = (295.4, 322.1) = 13 2 47.68 -63 50 8.2
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 41504.0 +/- 228.2
  Background counts = 10556.2
  Rate = 4 +/- 0.02
[Fri Feb 24 06:50:02 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 06:50:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 06:50:02 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 06:50:02 2012] Source does appear to be extended
[Fri Feb 24 06:50:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 06:50:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 06:50:13 2012] Initial guess for spatial extent in simple fitting = 5.83"
[Fri Feb 24 06:50:13 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.886
[Fri Feb 24 06:50:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.83"
[Fri Feb 24 07:07:37 2012] fullrun_pn_xmm0504550701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 24 07:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504550701_pi300-10000_cl_pass1_src1.csv
[Fri Feb 24 07:07:37 2012] fullrun_pn_xmm0504550701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 24 07:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504550701_pi300-10000_cl_pass1_src1.csv
[Fri Feb 24 07:07:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504550701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504550701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 07:07:37 2012] fullrun_pn_xmm0504550701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 24 07:07:37 2012] fullrun_pn_xmm0504550701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 24 07:07:37 2012] Fit fullrun_pn_xmm0504550701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 24 07:47:52 2012] Spatial fit model total counts = 51861.900000, observed total counts = 51862.000000
[Fri Feb 24 07:47:52 2012] Offset between fit and detection position for source 1 = 0.000923 pixels
[Fri Feb 24 07:47:52 2012] 52014.200000 total counts/ 10545.100000 bgd. counts: snr = 403.830632
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000923 pixels
  Position = (295.4, 322.1) = 13 2 47.68 -63 50 8.2
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 41469.1 +/- 228.1
  Background counts = 10545.1
  Rate = 4 +/- 0.02
[Fri Feb 24 07:47:52 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 07:47:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 07:47:52 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 07:47:52 2012] Source does appear to be extended
[Fri Feb 24 07:47:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 07:48:02 2012] Counts = 41469.100000, rescaling region sizes by 3.000000
[Fri Feb 24 07:48:02 2012] XMMSAS src. selection expression = ellipse(25653.663800, 27978.235400, 1049.783430, 1049.783430, 0.000000, X, Y)
[Fri Feb 24 07:48:02 2012] Writing source region out to fullrun_pn_xmm0504550701_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 24 07:48:02 2012] Extracting stamp from image fullrun_pn_xmm0504550701_pi300-10000_cl_sm2.00.img.gz, (235, 262) - (356, 382)
[Fri Feb 24 07:48:02 2012] XMMSAS bgd. selection expression = annulus(25653.663800, 27978.235400, 5248.917151, 10497.834302, X, Y) && !ellipse(24002.648407, 27091.666138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27905.310000, 25463.776000, 1138.584033, 1138.584033, 0.000000, X, Y) && !ellipse(26816.745819, 26849.824829, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 24 07:48:02 2012] Writing fullrun_pn_xmm0504550701_pi300-10000_pass1_cl_src1.gif
[Fri Feb 24 07:48:58 2012] Mean detx,y = (155.60, -202.56) 
[Fri Feb 24 07:49:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 07:50:52 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 07:50:52 2012] Setting source spectrum file to fullrun_pn_xmm0504550701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 24 07:50:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504550701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 24 08:42:59 2012] Updating aperture counts using extracted products
[Fri Feb 24 08:42:59 2012] Error reading totcts from fullrun_pn_xmm0504550701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 24 08:42:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 08:42:59 2012] Using photon index=1.80, rate=3.78, arf fullrun_pn_xmm0504550701_pi300-10000_pass1_cl_src1.arf
[Fri Feb 24 08:42:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 08:42:59 2012] Updating source flux to 8.5e-12
[Fri Feb 24 08:44:59 2012] Reading fit data from xmm0504550701/analysis//spectral/fullrun_pn_xmm0504550701_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 24 08:44:59 2012] Spectral fit parameter nH value = 4.72623e+21
[Fri Feb 24 08:44:59 2012] Spectral fit parameter PhoIndex value = 1.70298
[Fri Feb 24 08:44:59 2012] Failed to get F(0.3-8.0) from xmm0504550701/analysis//spectral/fullrun_pn_xmm0504550701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 24 08:44:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 08:44:59 2012] Using Nh = 4.7e+21, photon index=1.70, rate=3.78, arf fullrun_pn_xmm0504550701_pi300-10000_pass1_cl_src1.arf
[Fri Feb 24 08:44:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 08:44:59 2012] Updating source flux to 1.7e-11