[Fri Feb 24 05:57:59 2012] Detection parameters:
  Position = (295.5, 322.0) = 13 2 47.62 -63 50 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27999.2 +/- 198.4
  Background counts = 11.0
  Rate = 3 +/- 0.02

[Fri Feb 24 05:57:59 2012] Off-axis axis estimate = 1.72'
[Fri Feb 24 06:17:58 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 06:17:58 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Feb 24 06:17:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Fri Feb 24 06:17:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Feb 24 06:50:00 2012] fullrun_mos2_xmm0504550701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 24 06:50:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504550701_pi300-10000_cl_pass0_src1.csv
[Fri Feb 24 06:50:00 2012] fullrun_mos2_xmm0504550701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 24 06:50:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504550701_pi300-10000_cl_pass0_src1.csv
[Fri Feb 24 06:50:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504550701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504550701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 06:50:00 2012] fullrun_mos2_xmm0504550701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 06:50:00 2012] fullrun_mos2_xmm0504550701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 06:50:00 2012] Fit fullrun_mos2_xmm0504550701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 06:50:06 2012] Spatial fit model total counts = 23409.900000, observed total counts = 23449.000000
[Fri Feb 24 06:50:06 2012] Offset between fit and detection position for source 1 = 0.179040 pixels
[Fri Feb 24 06:50:06 2012] 23361.420000 total counts/ 4884.820000 bgd. counts: snr = 264.361236
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.179040 pixels
  Position = (295.3, 322.0) = 13 2 47.74 -63 50 8.7
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 18476.6 +/- 152.8
  Background counts = 4884.8
  Rate = 2 +/- 0.01
[Fri Feb 24 06:50:06 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 06:50:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 06:50:06 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 06:50:06 2012] Source does appear to be extended
[Fri Feb 24 06:50:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 07:14:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 07:14:29 2012] Initial guess for spatial extent in simple fitting = 5.44"
[Fri Feb 24 07:14:29 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.979
[Fri Feb 24 07:14:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.44"
[Fri Feb 24 07:47:49 2012] fullrun_mos2_xmm0504550701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 24 07:47:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504550701_pi300-10000_cl_pass1_src1.csv
[Fri Feb 24 07:47:49 2012] fullrun_mos2_xmm0504550701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 24 07:47:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504550701_pi300-10000_cl_pass1_src1.csv
[Fri Feb 24 07:47:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504550701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504550701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 07:47:49 2012] fullrun_mos2_xmm0504550701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 24 07:47:49 2012] fullrun_mos2_xmm0504550701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 24 07:47:49 2012] Fit fullrun_mos2_xmm0504550701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 24 07:47:56 2012] Spatial fit model total counts = 23441.900000, observed total counts = 23449.000000
[Fri Feb 24 07:47:56 2012] Offset between fit and detection position for source 1 = 0.000110 pixels
[Fri Feb 24 07:47:56 2012] 23394.550000 total counts/ 4914.950000 bgd. counts: snr = 263.592479
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000110 pixels
  Position = (295.3, 322.0) = 13 2 47.74 -63 50 8.7
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 18479.6 +/- 153.0
  Background counts = 4914.9
  Rate = 2 +/- 0.01
[Fri Feb 24 07:47:56 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 07:47:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 07:47:56 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 07:47:56 2012] Source does appear to be extended
[Fri Feb 24 07:47:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 08:29:33 2012] Counts = 18479.600000, rescaling region sizes by 3.000000
[Fri Feb 24 08:29:33 2012] XMMSAS src. selection expression = ellipse(25645.859200, 27967.052200, 977.389228, 977.389228, 0.000000, X, Y)
[Fri Feb 24 08:29:33 2012] Writing source region out to fullrun_mos2_xmm0504550701_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 24 08:29:33 2012] Extracting stamp from image fullrun_mos2_xmm0504550701_pi300-10000_cl_sm2.00.img.gz, (239, 266) - (352, 378)
[Fri Feb 24 08:29:33 2012] XMMSAS bgd. selection expression = annulus(25645.859200, 27967.052200, 4886.946141, 9773.892281, X, Y) && !ellipse(32090.336600, 18333.217400, 630.092818, 379.848811, 332.169859, X, Y)
[Fri Feb 24 08:29:33 2012] Writing fullrun_mos2_xmm0504550701_pi300-10000_pass1_cl_src1.gif
[Fri Feb 24 08:29:40 2012] Mean detx,y = (16.74, 64.07) 
[Fri Feb 24 08:29:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 08:33:24 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 08:33:24 2012] Setting source spectrum file to fullrun_mos2_xmm0504550701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 24 08:33:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504550701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 24 08:42:59 2012] Updating aperture counts using extracted products
[Fri Feb 24 08:42:59 2012] Error reading totcts from fullrun_mos2_xmm0504550701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 24 08:42:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 08:42:59 2012] Using photon index=1.80, rate=1.75, arf fullrun_mos2_xmm0504550701_pi300-10000_pass1_cl_src1.arf
[Fri Feb 24 08:42:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 08:42:59 2012] Updating source flux to 1.7e-11
[Fri Feb 24 08:44:10 2012] Reading fit data from xmm0504550701/analysis//spectral/fullrun_mos2_xmm0504550701_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 24 08:44:10 2012] Spectral fit parameter nH value = 5.15252e+21
[Fri Feb 24 08:44:10 2012] Spectral fit parameter PhoIndex value = 1.70688
[Fri Feb 24 08:44:10 2012] Failed to get F(0.3-8.0) from xmm0504550701/analysis//spectral/fullrun_mos2_xmm0504550701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 24 08:44:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 08:44:10 2012] Using Nh = 5.2e+21, photon index=1.71, rate=1.75, arf fullrun_mos2_xmm0504550701_pi300-10000_pass1_cl_src1.arf
[Fri Feb 24 08:44:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 08:44:10 2012] Updating source flux to 2.6e-11