[Sun Mar 11 10:52:17 2012] Detection parameters:
  Position = (304.2, 321.8) = 13 2 47.92 -63 50 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92923.7 +/- 357.9
  Background counts = 41.2
  Rate = 2 +/- 0.007

[Sun Mar 11 10:52:18 2012] Off-axis axis estimate = 1.74'
[Sun Mar 11 12:20:37 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 12:20:37 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 11 12:20:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sun Mar 11 12:20:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sun Mar 11 12:45:29 2012] fullrun_mos2_xmm0504550601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 11 12:45:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504550601_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 12:45:29 2012] fullrun_mos2_xmm0504550601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 11 12:45:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504550601_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 12:45:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504550601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504550601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 12:45:29 2012] fullrun_mos2_xmm0504550601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 11 12:45:29 2012] fullrun_mos2_xmm0504550601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 11 12:45:29 2012] Fit fullrun_mos2_xmm0504550601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 11 12:45:41 2012] Spatial fit model total counts = 85570.700000, observed total counts = 83032.000000
[Sun Mar 11 12:45:41 2012] Offset between fit and detection position for source 1 = 0.227472 pixels
[Sun Mar 11 12:45:41 2012] 85861.400000 total counts/ 21646.000000 bgd. counts: snr = 436.465946
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.227472 pixels
  Position = (304.0, 321.6) = 13 2 48.03 -63 50 10.0
  Extent = 5.2 (5.2-5.3)", rotation angle = 0
  Source counts = 64215.4 +/- 293.0
  Background counts = 21646.0
  Rate = 1 +/- 0.005
[Sun Mar 11 12:45:41 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 12:45:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 12:45:41 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 12:45:41 2012] Source does appear to be extended
[Sun Mar 11 12:45:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 13:08:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 13:08:02 2012] Initial guess for spatial extent in simple fitting = 5.24"
[Sun Mar 11 13:08:02 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.033
[Sun Mar 11 13:08:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.24"
[Sun Mar 11 13:19:36 2012] fullrun_mos2_xmm0504550601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 13:19:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504550601_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 13:19:36 2012] fullrun_mos2_xmm0504550601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 13:19:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504550601_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 13:19:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504550601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504550601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 13:19:36 2012] fullrun_mos2_xmm0504550601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 13:19:36 2012] fullrun_mos2_xmm0504550601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 13:19:36 2012] Fit fullrun_mos2_xmm0504550601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 13:19:42 2012] Spatial fit model total counts = 85533.900000, observed total counts = 83234.000000
[Sun Mar 11 13:19:42 2012] Offset between fit and detection position for source 1 = 0.011416 pixels
[Sun Mar 11 13:19:42 2012] 86149.200000 total counts/ 21691.700000 bgd. counts: snr = 437.649728
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011416 pixels
  Position = (304.0, 321.6) = 13 2 48.03 -63 50 10.1
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 64457.5 +/- 293.5
  Background counts = 21691.7
  Rate = 1 +/- 0.005
[Sun Mar 11 13:19:42 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 13:19:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 13:19:42 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 13:19:42 2012] Source does appear to be extended
[Sun Mar 11 13:19:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 15:34:52 2012] Counts = 64457.500000, rescaling region sizes by 3.000000
[Sun Mar 11 15:34:52 2012] XMMSAS src. selection expression = ellipse(26399.867330, 27930.062200, 947.255427, 947.255427, 0.000000, X, Y)
[Sun Mar 11 15:34:52 2012] Writing source region out to fullrun_mos2_xmm0504550601_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 11 15:34:52 2012] Extracting stamp from image fullrun_mos2_xmm0504550601_pi300-10000_cl_sm2.00.img.gz, (250, 267) - (358, 376)
[Sun Mar 11 15:34:52 2012] XMMSAS bgd. selection expression = annulus(26399.867330, 27930.062200, 4736.277136, 9472.554273, X, Y) && !ellipse(32852.970856, 18312.394928, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(36638.296570, 33187.807220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18760.124466, 21441.710693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17225.088745, 19970.061142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34546.198000, 20399.558000, 1704.774317, 1704.774317, 0.000000, X, Y)
[Sun Mar 11 15:34:52 2012] Writing fullrun_mos2_xmm0504550601_pi300-10000_pass1_cl_src1.gif
[Sun Mar 11 15:35:09 2012] Mean detx,y = (104.40, 129.84) 
[Sun Mar 11 15:35:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 15:38:53 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 15:38:54 2012] Setting source spectrum file to fullrun_mos2_xmm0504550601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 15:38:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504550601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 11 15:58:22 2012] Updating aperture counts using extracted products
[Sun Mar 11 15:58:22 2012] Error reading totcts from fullrun_mos2_xmm0504550601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 15:58:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 15:58:23 2012] Using photon index=1.80, rate=1.18, arf fullrun_mos2_xmm0504550601_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 15:58:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 15:58:23 2012] Updating source flux to 1.2e-11
[Sun Mar 11 15:59:35 2012] Reading fit data from xmm0504550601/analysis//spectral/fullrun_mos2_xmm0504550601_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 11 15:59:35 2012] Spectral fit parameter nH value = 5.10311e+21
[Sun Mar 11 15:59:35 2012] Spectral fit parameter PhoIndex value = 1.57897
[Sun Mar 11 15:59:35 2012] Failed to get F(0.3-8.0) from xmm0504550601/analysis//spectral/fullrun_mos2_xmm0504550601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 11 15:59:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 15:59:35 2012] Using Nh = 5.1e+21, photon index=1.58, rate=1.18, arf fullrun_mos2_xmm0504550601_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 15:59:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 15:59:35 2012] Updating source flux to 1.9e-11