[Sun Mar 11 10:51:42 2012] Detection parameters:
  Position = (421.8, 381.8) = 13 1 30.75 -63 45 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 226.8 +/- 19.5
  Background counts = 35.0
  Rate = 0.007 +/- 0.0006

[Sun Mar 11 10:51:42 2012] Off-axis axis estimate = 10.80'
[Sun Mar 11 12:01:31 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 12:01:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 11 12:01:31 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Sun Mar 11 12:01:31 2012] source mask rpix=2.7, npix_max = 41, mask sum = 32, frac = 0.772
[Sun Mar 11 12:01:31 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.83"
[Sun Mar 11 12:20:36 2012] fullrun_mos1_xmm0504550601_pi300-10000_cl_pass0_src4.ximg exists
[Sun Mar 11 12:20:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504550601_pi300-10000_cl_pass0_src4.csv
[Sun Mar 11 12:20:37 2012] fullrun_mos1_xmm0504550601_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Mar 11 12:20:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504550601_pi300-10000_cl_pass0_src4.csv
[Sun Mar 11 12:20:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504550601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504550601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 12:20:37 2012] fullrun_mos1_xmm0504550601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Mar 11 12:20:37 2012] fullrun_mos1_xmm0504550601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Mar 11 12:20:37 2012] Fit fullrun_mos1_xmm0504550601_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Mar 11 12:45:37 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.946593 pixels away
[Sun Mar 11 12:45:37 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 12:45:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 12:45:37 2012] Assessing source extent using major
[Sun Mar 11 12:45:37 2012] Source does appear to be extended
[Sun Mar 11 12:45:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 12:59:51 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 12:59:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 11 12:59:51 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Sun Mar 11 12:59:51 2012] source mask rpix=2.7, npix_max = 41, mask sum = 32, frac = 0.772
[Sun Mar 11 12:59:51 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.83"
[Sun Mar 11 13:08:02 2012] fullrun_mos1_xmm0504550601_pi300-10000_cl_pass1_src4.ximg exists
[Sun Mar 11 13:08:02 2012] fullrun_mos1_xmm0504550601_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Mar 11 13:08:02 2012] Fit fullrun_mos1_xmm0504550601_pi300-10000_cl_pass1_src4 appears to have run properly
[Sun Mar 11 13:08:02 2012] fullrun_mos1_xmm0504550601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Mar 11 13:08:02 2012] fullrun_mos1_xmm0504550601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Mar 11 13:08:02 2012] Fit fullrun_mos1_xmm0504550601_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Mar 11 13:19:40 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.946593 pixels away
[Sun Mar 11 13:19:40 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 13:19:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 13:19:40 2012] Assessing source extent using major
[Sun Mar 11 13:19:40 2012] Source does appear to be extended
[Sun Mar 11 13:19:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 15:09:57 2012] XMMSAS src. selection expression = ellipse(36650.045074, 33169.349457, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 15:09:57 2012] Writing source region out to fullrun_mos1_xmm0504550601_pi300-10000_pass1_cl_src5_src.reg
[Sun Mar 11 15:09:57 2012] Extracting stamp from image fullrun_mos1_xmm0504550601_pi300-10000_cl_sm2.00.img.gz, (384, 344) - (459, 419)
[Sun Mar 11 15:09:57 2012] XMMSAS bgd. selection expression = annulus(36650.045074, 33169.349457, 1087.500000, 2175.000000, X, Y)
[Sun Mar 11 15:09:57 2012] Writing fullrun_mos1_xmm0504550601_pi300-10000_pass1_cl_src5.gif
[Sun Mar 11 15:14:40 2012] Mean detx,y = (2042.05, 11069.20) 
[Sun Mar 11 15:14:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 15:14:58 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 15:14:59 2012] Setting source spectrum file to fullrun_mos1_xmm0504550601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 11 15:14:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504550601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Mar 11 15:34:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 11 15:34:36 2012] rmf not generated due to insufficient counts
[Sun Mar 11 15:58:22 2012] Updating aperture counts using extracted products
[Sun Mar 11 15:58:22 2012] Error reading totcts from fullrun_mos1_xmm0504550601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 11 15:58:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 15:58:22 2012] Using photon index=1.80, rate=0.00735, arf fullrun_mos1_xmm0504550601_pi300-10000_pass1_cl_src5.arf
[Sun Mar 11 15:58:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 15:58:22 2012] Updating source flux to 1.2e-13
[Sun Mar 11 15:58:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting