[Thu May 3 10:19:37 2012] Detection parameters: Position = (304.6, 290.9) = 14 42 40.50 -0 38 51.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 47.4 +/- 12.0 Background counts = 29.8 Rate = 0.001 +/- 0.0003 [Thu May 3 10:19:40 2012] Off-axis axis estimate = 0.70' [Thu May 3 15:20:53 2012] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting [Thu May 3 15:20:53 2012] Initial guess for spatial extent in simple fitting = 6.78" [Thu May 3 15:20:53 2012] source mask rpix=1.6, npix_max = 16, mask sum = 20, frac = 1.180 [Thu May 3 15:20:53 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 6.78" [Thu May 3 16:58:47 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src33.ximg exists [Thu May 3 16:58:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src33.csv [Thu May 3 16:58:47 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src33_1.ximg exists [Thu May 3 16:58:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src33.csv [Thu May 3 16:58:47 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src33_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 3 16:58:47 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists [Thu May 3 16:58:47 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists [Thu May 3 16:58:47 2012] Fit fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly [Thu May 3 16:59:24 2012] Spatial fit model total counts = 445.049000, observed total counts = 445.000000 [Thu May 3 16:59:24 2012] Offset between fit and detection position for source 19 = 0.167606 pixels [Thu May 3 16:59:24 2012] 433.074700 total counts/ 400.272000 bgd. counts: snr = 1.639578 Spatial fit parameters: Offset between fit and detection position for source 19 = 0.167606 pixels Position = (304.7, 290.9) = 14 42 40.45 -0 38 49.0 Extent = 5.5 (1.7-13.6)", rotation angle = 0 Source counts = 32.8 +/- 20.8 Background counts = 400.3 Rate = 0.0009 +/- 0.0005 Deleting source due to low Poisson probability