[Thu May  3 10:19:34 2012] Detection parameters:
  Position = (290.8, 275.3) = 14 42 44.48 -0 39 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16015.1 +/- 149.0
  Background counts = 29.3
  Rate = 0.4 +/- 0.004

[Thu May  3 10:19:40 2012] Off-axis axis estimate = 1.77'
[Thu May  3 15:20:53 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu May  3 15:20:53 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu May  3 15:20:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Thu May  3 15:20:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Thu May  3 16:58:46 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src1.ximg exists
[Thu May  3 16:58:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src1.csv
[Thu May  3 16:58:46 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May  3 16:58:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src1.csv
[Thu May  3 16:58:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 16:58:47 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May  3 16:58:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May  3 16:58:47 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May  3 16:58:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May  3 16:58:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504480301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 16:59:24 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.140646 pixels away
[Thu May  3 16:59:24 2012] Vigneting correction estimate = 1.000000
[Thu May  3 16:59:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 16:59:24 2012] Assessing source extent using major
[Thu May  3 16:59:24 2012] Source does appear to be extended
[Thu May  3 16:59:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 22:12:33 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu May  3 22:12:33 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu May  3 22:12:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Thu May  3 22:12:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.31"
[Thu May  3 23:42:39 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  3 23:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504480301_pi300-10000_cl_pass1_src1.csv
[Thu May  3 23:42:39 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  3 23:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504480301_pi300-10000_cl_pass1_src1.csv
[Thu May  3 23:42:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504480301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504480301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:42:40 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  3 23:42:40 2012] fullrun_mos2_xmm0504480301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  3 23:42:40 2012] Fit fullrun_mos2_xmm0504480301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May  3 23:43:17 2012] Spatial fit model total counts = 14981.400000, observed total counts = 14394.000000
[Thu May  3 23:43:17 2012] Offset between fit and detection position for source 1 = 0.241274 pixels
[Thu May  3 23:43:17 2012] 14927.310000 total counts/ 3822.310000 bgd. counts: snr = 179.620379
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.241274 pixels
  Position = (290.9, 275.5) = 14 42 44.46 -0 39 56.0
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 11105.0 +/- 122.2
  Background counts = 3822.3
  Rate = 0.3 +/- 0.003
[Thu May  3 23:43:17 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:43:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:43:17 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:43:17 2012] Source does appear to be extended
[Thu May  3 23:43:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 04:05:13 2012] Counts = 11105.000000, rescaling region sizes by 3.000000
[Fri May  4 04:05:13 2012] XMMSAS src. selection expression = ellipse(25259.088560, 23922.453200, 1000.387829, 1000.387829, 0.000000, X, Y)
[Fri May  4 04:05:13 2012] Writing source region out to fullrun_mos2_xmm0504480301_pi300-10000_pass1_cl_src1_src.reg
[Fri May  4 04:05:13 2012] Extracting stamp from image fullrun_mos2_xmm0504480301_pi300-10000_cl_sm2.00.img.gz, (233, 218) - (348, 333)
[Fri May  4 04:05:13 2012] XMMSAS bgd. selection expression = annulus(25259.088560, 23922.453200, 5001.939144, 10003.878288, X, Y) && !ellipse(20616.766541, 26924.386017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15644.638800, 31026.900200, 510.330415, 510.330415, 0.000000, X, Y) && !ellipse(20945.719360, 30733.482208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23585.441400, 20432.037400, 313.258409, 313.258409, 0.000000, X, Y) && !ellipse(19465.438309, 18295.137238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31937.710200, 19651.376600, 411.001612, 250.948807, 321.107116, X, Y) && !ellipse(34031.418884, 22124.632019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30153.868073, 22991.735382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20852.578278, 17030.500320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33355.656840, 25509.792960, 466.048013, 330.069609, -0.000000, X, Y) && !ellipse(21375.255600, 26801.764400, 282.932008, 282.932008, 0.000000, X, Y) && !ellipse(16784.041916, 20519.285812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16063.601044, 25983.916229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27348.671320, 28083.046400, 297.789609, 297.789609, 0.000000, X, Y) && !ellipse(28286.580658, 14650.674103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28247.883606, 18702.097473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31351.012817, 17487.006058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19014.885147, 13699.613403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27987.716200, 29062.375200, 320.312009, 320.312009, 0.000000, X, Y) && !ellipse(27347.425940, 23979.949400, 378.987211, 378.987211, 0.000000, X, Y) && !ellipse(24678.233887, 23440.695526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24411.533539, 24309.102509, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 04:05:13 2012] Writing fullrun_mos2_xmm0504480301_pi300-10000_pass1_cl_src1.gif
[Fri May  4 04:05:26 2012] Mean detx,y = (48.27, 123.07) 
[Fri May  4 04:05:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 04:12:49 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 04:12:49 2012] Setting source spectrum file to fullrun_mos2_xmm0504480301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May  4 04:12:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504480301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May  4 05:00:28 2012] Updating aperture counts using extracted products
[Fri May  4 05:00:28 2012] Error reading totcts from fullrun_mos2_xmm0504480301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May  4 05:00:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 05:00:29 2012] Using photon index=1.80, rate=0.292, arf fullrun_mos2_xmm0504480301_pi300-10000_pass1_cl_src1.arf
[Fri May  4 05:00:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 05:00:29 2012] Updating source flux to 2.9e-12
[Fri May  4 05:02:24 2012] Reading fit data from xmm0504480301/analysis//spectral/fullrun_mos2_xmm0504480301_pi300-10000_pass1_cl_src1_pl.csv
[Fri May  4 05:02:24 2012] Spectral fit parameter nH value = 1.81649e+21
[Fri May  4 05:02:24 2012] Spectral fit parameter PhoIndex value = 2.80905
[Fri May  4 05:02:24 2012] Failed to get F(0.3-8.0) from xmm0504480301/analysis//spectral/fullrun_mos2_xmm0504480301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri May  4 05:02:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 05:02:24 2012] Using Nh = 1.8e+21, photon index=2.81, rate=0.292, arf fullrun_mos2_xmm0504480301_pi300-10000_pass1_cl_src1.arf
[Fri May  4 05:02:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 05:02:24 2012] Updating source flux to 2.3e-12