[Sat Dec 31 10:05:12 2011] Detection parameters:
  Position = (151.0, 187.1) = 9 21 44.09 70 35 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 732.1 +/- 35.2
  Background counts = 68.6
  Rate = 0.01 +/- 0.0005

[Sat Dec 31 10:05:14 2011] Off-axis axis estimate = 13.39'
[Sat Dec 31 11:39:15 2011] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 11:39:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 31 11:39:15 2011] Initial guess for spatial extent in simple fitting = 13.12"
[Sat Dec 31 11:39:15 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Sat Dec 31 11:39:15 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 13.12"
[Sat Dec 31 12:44:52 2011] fullrun_mos2_xmm0504390201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Dec 31 12:44:52 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504390201_pi300-10000_cl_pass0_src3.csv
[Sat Dec 31 12:44:52 2011] fullrun_mos2_xmm0504390201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Dec 31 12:44:52 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504390201_pi300-10000_cl_pass0_src3.csv
[Sat Dec 31 12:44:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504390201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504390201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 12:44:53 2011] fullrun_mos2_xmm0504390201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Dec 31 12:44:53 2011] fullrun_mos2_xmm0504390201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Dec 31 12:44:53 2011] Fit fullrun_mos2_xmm0504390201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Dec 31 12:45:10 2011] Spatial fit model total counts = 1156.000000, observed total counts = 1156.000000
[Sat Dec 31 12:45:10 2011] Offset between fit and detection position for source 1 = 0.173398 pixels
[Sat Dec 31 12:45:10 2011] 1165.305000 total counts/ 718.204000 bgd. counts: snr = 16.683291
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.173398 pixels
  Position = (151.1, 187.3) = 9 21 44.03 70 35 50.6
  Extent = 5.8 (5.3-6.4)", rotation angle = 0
  Source counts = 447.1 +/- 34.1
  Background counts = 718.2
  Rate = 0.006 +/- 0.0005
[Sat Dec 31 12:45:10 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 12:45:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 12:45:10 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 12:45:10 2011] Source does appear to be extended
[Sat Dec 31 12:45:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 13:44:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 13:44:51 2011] Initial guess for spatial extent in simple fitting = 5.79"
[Sat Dec 31 13:44:51 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.194
[Sat Dec 31 13:44:51 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.79"
[Sat Dec 31 14:52:29 2011] fullrun_mos2_xmm0504390201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Dec 31 14:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504390201_pi300-10000_cl_pass1_src3.csv
[Sat Dec 31 14:52:29 2011] fullrun_mos2_xmm0504390201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Dec 31 14:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504390201_pi300-10000_cl_pass1_src3.csv
[Sat Dec 31 14:52:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504390201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504390201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 14:52:29 2011] fullrun_mos2_xmm0504390201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Dec 31 14:52:29 2011] fullrun_mos2_xmm0504390201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Dec 31 14:52:29 2011] Fit fullrun_mos2_xmm0504390201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Dec 31 14:52:47 2011] Spatial fit model total counts = 1016.090000, observed total counts = 1017.000000
[Sat Dec 31 14:52:47 2011] Offset between fit and detection position for source 1 = 0.034236 pixels
[Sat Dec 31 14:52:47 2011] 1027.482000 total counts/ 599.359000 bgd. counts: snr = 17.487392
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.034236 pixels
  Position = (151.1, 187.2) = 9 21 44.02 70 35 50.5
  Extent = 5.6 (5.1-6.1)", rotation angle = 0
  Source counts = 428.1 +/- 32.1
  Background counts = 599.4
  Rate = 0.006 +/- 0.0005
[Sat Dec 31 14:52:47 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 14:52:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 14:52:47 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 14:52:47 2011] Source does appear to be extended
[Sat Dec 31 14:52:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 16:23:18 2011] XMMSAS src. selection expression = ellipse(13100.170680, 16241.970200, 334.335610, 334.335610, 0.000000, X, Y)
[Sat Dec 31 16:23:18 2011] Writing source region out to fullrun_mos2_xmm0504390201_pi300-10000_pass1_cl_src1_src.reg
[Sat Dec 31 16:23:18 2011] Extracting stamp from image fullrun_mos2_xmm0504390201_pi300-10000_cl_sm2.00.img.gz, (132, 168) - (170, 206)
[Sat Dec 31 16:23:18 2011] XMMSAS bgd. selection expression = annulus(13100.170680, 16241.970200, 557.226016, 1114.452032, X, Y)
[Sat Dec 31 16:23:18 2011] Writing fullrun_mos2_xmm0504390201_pi300-10000_pass1_cl_src1.gif
[Sat Dec 31 16:24:37 2011] Mean detx,y = (-14338.01, -5719.14) 
[Sat Dec 31 16:24:39 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 16:24:54 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 16:24:54 2011] Setting source spectrum file to fullrun_mos2_xmm0504390201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 31 16:24:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504390201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Dec 31 17:16:09 2011] Updating aperture counts using extracted products
[Sat Dec 31 17:16:09 2011] Error reading totcts from fullrun_mos2_xmm0504390201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 31 17:16:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 17:16:10 2011] Using photon index=1.80, rate=0.0061, arf fullrun_mos2_xmm0504390201_pi300-10000_pass1_cl_src1.arf
[Sat Dec 31 17:16:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 17:16:10 2011] Updating source flux to 1.8e-13