[Tue Jun 19 20:56:38 2012] Detection parameters:
  Position = (337.0, 373.7) = 23 58 47.88 -30 31 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.5 +/- 20.6
  Background counts = 93.1
  Rate = 0.002 +/- 0.0002

[Tue Jun 19 20:56:38 2012] Off-axis axis estimate = 6.13'
[Tue Jun 19 21:43:20 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 21:43:20 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Tue Jun 19 21:43:20 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.042
[Tue Jun 19 21:43:20 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.49"
[Tue Jun 19 22:44:41 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jun 19 22:44:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src13.csv
[Tue Jun 19 22:44:41 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jun 19 22:44:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src13.csv
[Tue Jun 19 22:44:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 22:44:42 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jun 19 22:44:42 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jun 19 22:44:42 2012] Fit fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Jun 19 22:44:54 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.706177 pixels away
[Tue Jun 19 22:44:54 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 22:44:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 22:44:54 2012] Assessing source extent using major
[Tue Jun 19 22:44:54 2012] Source does appear to be extended
[Tue Jun 19 22:44:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 23:21:49 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 23:21:49 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Tue Jun 19 23:21:49 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.042
[Tue Jun 19 23:21:49 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.49"
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jun 20 00:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src13.csv
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jun 20 00:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src13.csv
[Wed Jun 20 00:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jun 20 00:00:10 2012] Fit fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Jun 20 00:00:18 2012] Spatial fit model total counts = 909.137000, observed total counts = 888.000000
[Wed Jun 20 00:00:18 2012] Offset between fit and detection position for source 17 = 0.340059 pixels
[Wed Jun 20 00:00:18 2012] 909.903000 total counts/ 800.578000 bgd. counts: snr = 3.863827
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.340059 pixels
  Position = (336.7, 373.5) = 23 58 47.98 -30 31 36.6
  Extent = 5.7 (4.2-8.0)", rotation angle = 0
  Source counts = 109.3 +/- 30.2
  Background counts = 800.6
  Rate = 0.0009 +/- 0.0002
[Wed Jun 20 00:00:18 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 00:00:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 00:00:18 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 00:00:18 2012] Source does appear to be extended
[Wed Jun 20 00:00:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 01:55:25 2012] XMMSAS src. selection expression = ellipse(29246.593400, 32448.569800, 339.370810, 339.370810, 0.000000, X, Y)
[Wed Jun 20 01:55:25 2012] Writing source region out to fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun 20 01:55:25 2012] Extracting stamp from image fullrun_mos2_xmm0504370701_pi300-10000_cl_sm2.00.img.gz, (317, 354) - (356, 393)
[Wed Jun 20 01:55:25 2012] XMMSAS bgd. selection expression = annulus(29246.593400, 32448.569800, 565.618016, 1131.236033, X, Y)
[Wed Jun 20 01:55:25 2012] Writing fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src17.gif
[Wed Jun 20 02:05:54 2012] Mean detx,y = (921.95, -8935.74) 
[Wed Jun 20 02:05:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 02:06:09 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 02:06:09 2012] Setting source spectrum file to fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 20 02:06:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jun 20 02:48:21 2012] Updating aperture counts using extracted products
[Wed Jun 20 02:48:21 2012] Error reading totcts from fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 20 02:48:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:48:21 2012] Using photon index=1.80, rate=0.000895, arf fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src17.arf
[Wed Jun 20 02:48:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:48:21 2012] Updating source flux to 1.6e-14