[Tue Jun 19 20:56:38 2012] Detection parameters:
  Position = (426.5, 417.8) = 23 58 17.78 -30 28 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.4 +/- 19.1
  Background counts = 76.0
  Rate = 0.001 +/- 0.0002

[Tue Jun 19 20:56:38 2012] Off-axis axis estimate = 12.69'
[Tue Jun 19 21:43:20 2012] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 21:43:20 2012] Initial guess for spatial extent in simple fitting = 12.78"
[Tue Jun 19 21:43:20 2012] source mask rpix=2.9, npix_max = 47, mask sum = 43, frac = 0.910
[Tue Jun 19 21:43:20 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 12.78"
[Tue Jun 19 22:44:41 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src20.ximg exists
[Tue Jun 19 22:44:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src20.csv
[Tue Jun 19 22:44:41 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Jun 19 22:44:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src20.csv
[Tue Jun 19 22:44:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 22:44:42 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Jun 19 22:44:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jun 19 22:44:42 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jun 19 22:44:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jun 19 22:44:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 22:44:54 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.239894 pixels away
[Tue Jun 19 22:44:54 2012] Source 11 is offset by 6.299526 and 1.388985 pixels which is larger than
2 X fitted extent = 1.693162 x 1.693162, not incorporating fit results
[Tue Jun 19 22:44:54 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 22:44:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 22:44:54 2012] Assessing source extent using major
[Tue Jun 19 22:44:54 2012] Source does appear to be extended
[Tue Jun 19 22:44:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 23:21:49 2012] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 23:21:49 2012] Initial guess for spatial extent in simple fitting = 12.78"
[Tue Jun 19 23:21:49 2012] source mask rpix=2.9, npix_max = 47, mask sum = 43, frac = 0.910
[Tue Jun 19 23:21:49 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 12.78"
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src18.ximg exists
[Wed Jun 20 00:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src18.csv
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Jun 20 00:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src18.csv
[Wed Jun 20 00:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Jun 20 00:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Jun 20 00:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 20 00:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 00:00:18 2012] Source 11 is offset by 4.482837 and 7.073439 pixels which is larger than
2 X fitted extent = 1.468437 x 1.468437, not incorporating fit results
[Wed Jun 20 00:00:18 2012] Source 11 is offset by 6.299021 and -5.357107 pixels which is larger than
2 X fitted extent = 1.399209 x 1.399209, not incorporating fit results
[Wed Jun 20 00:00:18 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 00:00:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 00:00:18 2012] Assessing source extent using major
[Wed Jun 20 00:00:18 2012] Source does appear to be extended
[Wed Jun 20 00:00:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 01:55:25 2012] XMMSAS src. selection expression = ellipse(37056.362793, 36303.279663, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 20 01:55:25 2012] Writing source region out to fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src11_src.reg
[Wed Jun 20 01:55:25 2012] Extracting stamp from image fullrun_mos2_xmm0504370701_pi300-10000_cl_sm2.00.img.gz, (389, 380) - (464, 455)
[Wed Jun 20 01:55:25 2012] XMMSAS bgd. selection expression = annulus(37056.362793, 36303.279663, 1087.500000, 2175.000000, X, Y) && !ellipse(35576.906128, 35750.903473, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 01:55:25 2012] Writing fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src11.gif
[Wed Jun 20 02:07:40 2012] Mean detx,y = (5815.17, -15982.26) 
[Wed Jun 20 02:07:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 02:07:59 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 02:07:59 2012] Setting source spectrum file to fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jun 20 02:07:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jun 20 02:41:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 20 02:41:07 2012] rmf not generated due to insufficient counts
[Wed Jun 20 02:48:21 2012] Updating aperture counts using extracted products
[Wed Jun 20 02:48:21 2012] Error reading totcts from fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jun 20 02:48:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:48:21 2012] Using photon index=1.80, rate=0.00133, arf fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src11.arf
[Wed Jun 20 02:48:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:48:21 2012] Updating source flux to 6.8e-14
[Wed Jun 20 02:48:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting