[Tue Jun 19 20:56:38 2012] Detection parameters:
  Position = (277.8, 289.8) = 23 59 7.82 -30 37 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 450666.1 +/- 795.0
  Background counts = 143.6
  Rate = 4 +/- 0.007

[Tue Jun 19 20:56:38 2012] Off-axis axis estimate = 1.62'
[Tue Jun 19 21:43:20 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 21:43:20 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Jun 19 21:43:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Tue Jun 19 21:43:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Tue Jun 19 22:44:41 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 22:44:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 22:44:41 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 22:44:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 22:44:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 22:44:41 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 22:44:41 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 22:44:41 2012] Fit fullrun_mos2_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 22:44:54 2012] Spatial fit model total counts = 362169.000000, observed total counts = 384354.000000
[Tue Jun 19 22:44:54 2012] Offset between fit and detection position for source 1 = 0.140656 pixels
[Tue Jun 19 22:44:54 2012] 358896.000000 total counts/ 25600.000000 bgd. counts: snr = 2083.100000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.140656 pixels
  Position = (277.8, 289.6) = 23 59 7.82 -30 37 41.5
  Extent = 6.3 (6.2-6.3)", rotation angle = 0
  Source counts = 333296.0 +/- 599.1
  Background counts = 25600.0
  Rate = 3 +/- 0.005
[Tue Jun 19 22:44:54 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 22:44:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 22:44:54 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 22:44:54 2012] Source does appear to be extended
[Tue Jun 19 22:44:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 23:21:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 23:21:49 2012] Initial guess for spatial extent in simple fitting = 6.25"
[Tue Jun 19 23:21:49 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.066
[Tue Jun 19 23:21:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.25"
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 20 00:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src1.csv
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 20 00:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src1.csv
[Wed Jun 20 00:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 20 00:00:10 2012] fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 20 00:00:10 2012] Fit fullrun_mos2_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 20 00:00:18 2012] Spatial fit model total counts = 360365.000000, observed total counts = 384401.000000
[Wed Jun 20 00:00:18 2012] Offset between fit and detection position for source 1 = 0.003935 pixels
[Wed Jun 20 00:00:18 2012] 359818.000000 total counts/ 25600.000000 bgd. counts: snr = 2088.862500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003935 pixels
  Position = (277.8, 289.6) = 23 59 7.82 -30 37 41.6
  Extent = 6.3 (6.3-6.3)", rotation angle = 0
  Source counts = 334218.0 +/- 599.8
  Background counts = 25600.0
  Rate = 3 +/- 0.005
[Wed Jun 20 00:00:18 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 00:00:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 00:00:18 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 00:00:18 2012] Source does appear to be extended
[Wed Jun 20 00:00:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 01:55:25 2012] Counts = 334218.000000, rescaling region sizes by 3.000000
[Wed Jun 20 01:55:25 2012] XMMSAS src. selection expression = ellipse(24120.262280, 25150.049800, 1130.887833, 1130.887833, 0.000000, X, Y)
[Wed Jun 20 01:55:25 2012] Writing source region out to fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 20 01:55:25 2012] Extracting stamp from image fullrun_mos2_xmm0504370701_pi300-10000_cl_sm2.00.img.gz, (213, 225) - (343, 355)
[Wed Jun 20 01:55:25 2012] XMMSAS bgd. selection expression = annulus(24120.262280, 25150.049800, 5654.439163, 11308.878325, X, Y) && !ellipse(19871.126785, 33954.221252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23354.542480, 25693.588776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13498.850400, 22817.191300, 583.988017, 339.025610, 62.938923, X, Y) && !ellipse(13801.269040, 36073.357800, 382.304811, 382.304811, 0.000000, X, Y) && !ellipse(25780.451000, 35961.410400, 995.128029, 396.053611, 0.836606, X, Y) && !ellipse(30982.819959, 17135.445200, 533.261615, 533.261615, 0.000000, X, Y) && !ellipse(29860.065186, 19777.193176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22092.893799, 34388.307922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18224.744446, 14766.956421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16245.076279, 25376.665894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29246.593400, 32448.569800, 452.494413, 452.494413, 0.000000, X, Y) && !ellipse(18915.060028, 36868.073425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28489.114258, 36880.721985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19898.703247, 18647.170227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16670.656235, 30440.571411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18642.833237, 29988.462402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35576.906128, 35750.903473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15160.813400, 17346.739600, 614.875218, 614.875218, 0.000000, X, Y)
[Wed Jun 20 01:55:25 2012] Writing fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src1.gif
[Wed Jun 20 01:56:02 2012] Mean detx,y = (2.06, -87.54) 
[Wed Jun 20 01:56:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 01:59:52 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 01:59:52 2012] Setting source spectrum file to fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 20 01:59:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 20 02:48:20 2012] Updating aperture counts using extracted products
[Wed Jun 20 02:48:20 2012] Error reading totcts from fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 20 02:48:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:48:21 2012] Using photon index=1.80, rate=2.74, arf fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src1.arf
[Wed Jun 20 02:48:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:48:21 2012] Updating source flux to 2.7e-11
[Wed Jun 20 02:49:49 2012] Reading fit data from xmm0504370701/analysis//spectral/fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 20 02:49:49 2012] Spectral fit parameter nH value = 3.33672e+20
[Wed Jun 20 02:49:49 2012] Spectral fit parameter PhoIndex value = 2.17879
[Wed Jun 20 02:49:49 2012] Failed to get F(0.3-8.0) from xmm0504370701/analysis//spectral/fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 20 02:49:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:49:49 2012] Using Nh = 3.3e+20, photon index=2.18, rate=2.74, arf fullrun_mos2_xmm0504370701_pi300-10000_pass1_cl_src1.arf
[Wed Jun 20 02:49:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:49:49 2012] Updating source flux to 2.4e-11