[Tue Jun 19 20:56:10 2012] Detection parameters:
  Position = (277.9, 289.8) = 23 59 7.79 -30 37 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 452968.2 +/- 781.9
  Background counts = 166.3
  Rate = 4 +/- 0.006

[Tue Jun 19 20:56:11 2012] Off-axis axis estimate = 1.62'
[Tue Jun 19 21:00:09 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 21:00:09 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Jun 19 21:00:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Tue Jun 19 21:00:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Tue Jun 19 21:43:19 2012] fullrun_mos1_xmm0504370701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 21:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504370701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 21:43:19 2012] fullrun_mos1_xmm0504370701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 21:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504370701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 21:43:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504370701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504370701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 21:43:19 2012] fullrun_mos1_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 21:43:19 2012] fullrun_mos1_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 21:43:19 2012] Fit fullrun_mos1_xmm0504370701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 22:44:48 2012] Spatial fit model total counts = 358418.000000, observed total counts = 382921.000000
[Tue Jun 19 22:44:48 2012] Offset between fit and detection position for source 1 = 0.158110 pixels
[Tue Jun 19 22:44:48 2012] 357743.000000 total counts/ 25600.000000 bgd. counts: snr = 2075.893750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.158110 pixels
  Position = (277.8, 289.7) = 23 59 7.83 -30 37 41.3
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 332143.0 +/- 598.1
  Background counts = 25600.0
  Rate = 3 +/- 0.005
[Tue Jun 19 22:44:48 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 22:44:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 22:44:48 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 22:44:48 2012] Source does appear to be extended
[Tue Jun 19 22:44:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 22:44:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 22:44:59 2012] Initial guess for spatial extent in simple fitting = 6.17"
[Tue Jun 19 22:44:59 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.086
[Tue Jun 19 22:44:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.17"
[Tue Jun 19 23:21:49 2012] fullrun_mos1_xmm0504370701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 19 23:21:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504370701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 23:21:49 2012] fullrun_mos1_xmm0504370701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 19 23:21:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504370701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 23:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504370701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504370701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 23:21:49 2012] fullrun_mos1_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 23:21:49 2012] fullrun_mos1_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 23:21:49 2012] Fit fullrun_mos1_xmm0504370701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 20 00:00:14 2012] Spatial fit model total counts = 358406.000000, observed total counts = 382921.000000
[Wed Jun 20 00:00:14 2012] Offset between fit and detection position for source 1 = 0.000126 pixels
[Wed Jun 20 00:00:14 2012] 357724.000000 total counts/ 25600.000000 bgd. counts: snr = 2075.775000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000126 pixels
  Position = (277.8, 289.7) = 23 59 7.83 -30 37 41.3
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 332124.0 +/- 598.1
  Background counts = 25600.0
  Rate = 3 +/- 0.005
[Wed Jun 20 00:00:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 00:00:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 00:00:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 00:00:14 2012] Source does appear to be extended
[Wed Jun 20 00:00:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 00:00:23 2012] Counts = 332124.000000, rescaling region sizes by 3.000000
[Wed Jun 20 00:00:23 2012] XMMSAS src. selection expression = ellipse(24118.207880, 25156.055000, 1111.188632, 1111.188632, 0.000000, X, Y)
[Wed Jun 20 00:00:23 2012] Writing source region out to fullrun_mos1_xmm0504370701_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 20 00:00:23 2012] Extracting stamp from image fullrun_mos1_xmm0504370701_pi300-10000_cl_sm2.00.img.gz, (214, 226) - (342, 354)
[Wed Jun 20 00:00:23 2012] XMMSAS bgd. selection expression = annulus(24118.207880, 25156.055000, 5555.943160, 11111.886320, X, Y) && !ellipse(23116.168640, 24907.678864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19834.555400, 33967.416400, 539.440816, 539.440816, 0.000000, X, Y) && !ellipse(23598.393646, 24490.000275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13814.087646, 36079.569550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13465.352203, 22847.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18218.498489, 14771.985046, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 00:00:23 2012] Writing fullrun_mos1_xmm0504370701_pi300-10000_pass1_cl_src1.gif
[Wed Jun 20 00:00:56 2012] Mean detx,y = (120.75, -151.06) 
[Wed Jun 20 00:01:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 00:04:08 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 00:04:08 2012] Setting source spectrum file to fullrun_mos1_xmm0504370701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 20 00:04:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504370701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 20 02:48:20 2012] Updating aperture counts using extracted products
[Wed Jun 20 02:48:20 2012] Error reading totcts from fullrun_mos1_xmm0504370701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 20 02:48:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:48:20 2012] Using photon index=1.80, rate=2.71, arf fullrun_mos1_xmm0504370701_pi300-10000_pass1_cl_src1.arf
[Wed Jun 20 02:48:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:48:20 2012] Updating source flux to 2.4e-11
[Wed Jun 20 02:48:45 2012] Reading fit data from xmm0504370701/analysis//spectral/fullrun_mos1_xmm0504370701_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 20 02:48:45 2012] Spectral fit parameter nH value = 2.51342e+20
[Wed Jun 20 02:48:45 2012] Spectral fit parameter PhoIndex value = 2.17534
[Wed Jun 20 02:48:45 2012] Failed to get F(0.3-8.0) from xmm0504370701/analysis//spectral/fullrun_mos1_xmm0504370701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 20 02:48:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:48:45 2012] Using Nh = 2.5e+20, photon index=2.18, rate=2.71, arf fullrun_mos1_xmm0504370701_pi300-10000_pass1_cl_src1.arf
[Wed Jun 20 02:48:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:48:45 2012] Updating source flux to 2.1e-11