[Tue Feb 14 10:34:19 2012] Detection parameters:
  Position = (287.6, 280.1) = 22 2 40.78 42 16 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 523.0 +/- 57.2
  Background counts = 205.5
  Rate = 0.005 +/- 0.0005

[Tue Feb 14 10:34:21 2012] Off-axis axis estimate = 1.55'
[Tue Feb 14 12:52:10 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 12:52:10 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Tue Feb 14 12:52:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.753
[Tue Feb 14 12:52:10 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.20"
[Tue Feb 14 13:31:10 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src5.ximg exists
[Tue Feb 14 13:31:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src5.csv
[Tue Feb 14 13:31:10 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Feb 14 13:31:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src5.csv
[Tue Feb 14 13:31:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 13:31:10 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Feb 14 13:31:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Feb 14 13:31:10 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Feb 14 13:31:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Feb 14 13:31:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 13:31:18 2012] Source 7 is offset by 5.941854 and -3.000472 pixels which is larger than
2 X fitted extent = 2.041664 x 2.041664, not incorporating fit results
[Tue Feb 14 13:31:18 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 13:31:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 13:31:18 2012] Assessing source extent using major
[Tue Feb 14 13:31:18 2012] Source does appear to be extended
[Tue Feb 14 13:31:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 13:31:18 2012] Source is confused with source 1
[Tue Feb 14 14:14:30 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 14:14:30 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Tue Feb 14 14:14:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.753
[Tue Feb 14 14:14:30 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.20"
[Tue Feb 14 15:31:31 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src5.ximg exists
[Tue Feb 14 15:31:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src5.csv
[Tue Feb 14 15:31:31 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Feb 14 15:31:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src5.csv
[Tue Feb 14 15:31:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 15:31:31 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Feb 14 15:31:31 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Feb 14 15:31:31 2012] Fit fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Feb 14 15:31:40 2012] Source 7 is offset by 5.958084 and -3.014741 pixels which is larger than
2 X fitted extent = 2.121398 x 2.121398, not incorporating fit results
[Tue Feb 14 15:31:40 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 15:31:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 15:31:40 2012] Assessing source extent using major
[Tue Feb 14 15:31:40 2012] Source does appear to be extended
[Tue Feb 14 15:31:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 16:15:42 2012] XMMSAS src. selection expression = ellipse(24971.617279, 24319.735901, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 14 16:15:42 2012] Writing source region out to fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src7_src.reg
[Tue Feb 14 16:15:42 2012] Extracting stamp from image fullrun_mos2_xmm0504370401_pi300-10000_cl_sm2.00.img.gz, (250, 243) - (325, 318)
[Tue Feb 14 16:15:42 2012] XMMSAS bgd. selection expression = annulus(24971.617279, 24319.735901, 1087.500000, 2175.000000, X, Y) && !ellipse(24447.236600, 24585.356800, 1253.834436, 1253.834436, 0.000000, X, Y)
[Tue Feb 14 16:15:42 2012] Writing fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src7.gif
[Tue Feb 14 16:20:51 2012] Mean detx,y = (94.55, -19.11) 
[Tue Feb 14 16:20:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 16:21:11 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 16:21:11 2012] Setting source spectrum file to fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Feb 14 16:21:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Feb 14 16:47:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 14 16:47:02 2012] rmf not generated due to insufficient counts
[Tue Feb 14 17:11:11 2012] Updating aperture counts using extracted products
[Tue Feb 14 17:11:11 2012] Error reading totcts from fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Feb 14 17:11:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 17:11:11 2012] Using photon index=1.80, rate=0.00457, arf fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src7.arf
[Tue Feb 14 17:11:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 17:11:11 2012] Updating source flux to 5.1e-14
[Tue Feb 14 17:12:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting