[Tue Feb 14 10:34:19 2012] Detection parameters:
  Position = (281.6, 283.1) = 22 2 43.13 42 16 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95695.2 +/- 363.5
  Background counts = 248.9
  Rate = 0.8 +/- 0.003

[Tue Feb 14 10:34:21 2012] Off-axis axis estimate = 1.65'
[Tue Feb 14 12:52:10 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 12:52:10 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Feb 14 12:52:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Tue Feb 14 12:52:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Feb 14 13:31:10 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 14 13:31:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 13:31:10 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 14 13:31:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 13:31:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 13:31:10 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 13:31:10 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 13:31:10 2012] Fit fullrun_mos2_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 13:31:18 2012] Spatial fit model total counts = 81922.000000, observed total counts = 82010.000000
[Tue Feb 14 13:31:18 2012] Offset between fit and detection position for source 1 = 0.035198 pixels
[Tue Feb 14 13:31:18 2012] 82387.000000 total counts/ 16968.800000 bgd. counts: snr = 502.195740
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.035198 pixels
  Position = (281.6, 283.1) = 22 2 43.14 42 16 39.7
  Extent = 5.2 (5.2-5.3)", rotation angle = 0
  Source counts = 65418.2 +/- 287.0
  Background counts = 16968.8
  Rate = 0.5 +/- 0.002
[Tue Feb 14 13:31:18 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 13:31:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 13:31:18 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 13:31:18 2012] Source does appear to be extended
[Tue Feb 14 13:31:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 13:31:18 2012] Source is confused with source 7
[Tue Feb 14 14:14:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 14:14:30 2012] Initial guess for spatial extent in simple fitting = 5.23"
[Tue Feb 14 14:14:30 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.036
[Tue Feb 14 14:14:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.23"
[Tue Feb 14 15:31:31 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 14 15:31:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 15:31:31 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 14 15:31:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 15:31:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 15:31:31 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 15:31:31 2012] fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 15:31:31 2012] Fit fullrun_mos2_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 15:31:40 2012] Spatial fit model total counts = 81949.800000, observed total counts = 82010.000000
[Tue Feb 14 15:31:40 2012] Offset between fit and detection position for source 1 = 0.000517 pixels
[Tue Feb 14 15:31:40 2012] 82414.700000 total counts/ 17001.700000 bgd. counts: snr = 501.669725
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000517 pixels
  Position = (281.6, 283.1) = 22 2 43.14 42 16 39.7
  Extent = 5.2 (5.2-5.3)", rotation angle = 0
  Source counts = 65413.0 +/- 287.1
  Background counts = 17001.7
  Rate = 0.5 +/- 0.002
[Tue Feb 14 15:31:40 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 15:31:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 15:31:40 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 15:31:40 2012] Source does appear to be extended
[Tue Feb 14 15:31:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 16:15:42 2012] Counts = 65413.000000, rescaling region sizes by 3.000000
[Tue Feb 14 16:15:42 2012] XMMSAS src. selection expression = ellipse(24447.236600, 24585.356800, 940.375827, 940.375827, 0.000000, X, Y)
[Tue Feb 14 16:15:42 2012] Writing source region out to fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src1_src.reg
[Tue Feb 14 16:15:42 2012] Extracting stamp from image fullrun_mos2_xmm0504370401_pi300-10000_cl_sm2.00.img.gz, (228, 229) - (336, 337)
[Tue Feb 14 16:15:42 2012] XMMSAS bgd. selection expression = annulus(24447.236600, 24585.356800, 4701.879135, 9403.758271, X, Y) && !ellipse(29845.207400, 31531.165200, 403.643891, 403.643891, 0.000000, X, Y) && !ellipse(24971.617279, 24319.735901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21299.037384, 15192.550980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22193.860200, 17780.136800, 1625.648047, 1625.648047, 0.000000, X, Y) && !ellipse(25521.422280, 33547.970600, 352.203210, 352.203210, 0.000000, X, Y) && !ellipse(32094.033386, 17443.507385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18900.150711, 14351.128387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30786.824402, 21218.384232, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 14 16:15:42 2012] Writing fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src1.gif
[Tue Feb 14 16:16:03 2012] Mean detx,y = (6.92, -49.77) 
[Tue Feb 14 16:16:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 16:18:23 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 16:18:23 2012] Setting source spectrum file to fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 16:18:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Feb 14 17:11:11 2012] Updating aperture counts using extracted products
[Tue Feb 14 17:11:11 2012] Error reading totcts from fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 17:11:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 17:11:11 2012] Using photon index=1.80, rate=0.514, arf fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 17:11:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 17:11:11 2012] Updating source flux to 5.1e-12
[Tue Feb 14 17:12:36 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Feb 14 17:16:38 2012] Reading fit data from xmm0504370401/analysis//spectral/fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Feb 14 17:16:38 2012] Spectral fit parameter nH value = 2.22831e+21
[Tue Feb 14 17:16:38 2012] Spectral fit parameter PhoIndex value = 1.87371
[Tue Feb 14 17:16:38 2012] Failed to get F(0.3-8.0) from xmm0504370401/analysis//spectral/fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Feb 14 17:16:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 17:16:38 2012] Using Nh = 2.2e+21, photon index=1.87, rate=0.514, arf fullrun_mos2_xmm0504370401_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 17:16:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 17:16:38 2012] Updating source flux to 6e-12