[Tue Feb 14 10:33:48 2012] Detection parameters:
  Position = (161.1, 213.0) = 22 3 30.27 42 11 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.7 +/- 24.2
  Background counts = 216.8
  Rate = 0.002 +/- 0.0003

[Tue Feb 14 10:33:48 2012] Off-axis axis estimate = 11.72'
[Tue Feb 14 10:38:28 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 10:38:28 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Tue Feb 14 10:38:28 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.814
[Tue Feb 14 10:38:28 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.29"
[Tue Feb 14 12:52:10 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src17.ximg exists
[Tue Feb 14 12:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src17.csv
[Tue Feb 14 12:52:10 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Feb 14 12:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src17.csv
[Tue Feb 14 12:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 12:52:10 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Feb 14 12:52:10 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Feb 14 12:52:10 2012] Fit fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Feb 14 13:31:14 2012] Spatial fit model total counts = 1693.940000, observed total counts = 1697.000000
[Tue Feb 14 13:31:14 2012] Offset between fit and detection position for source 17 = 3.168553 pixels
[Tue Feb 14 13:31:14 2012] 1671.906000 total counts/ 1064.330000 bgd. counts: snr = 18.623550
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 3.168553 pixels
  Position = (164.1, 211.9) = 22 3 29.11 42 11 29.2
  Extent = 24.6 (24.5-49.2)", rotation angle = 0
  Source counts = 607.6 +/- 40.9
  Background counts = 1064.3
  Rate = 0.005 +/- 0.0003
[Tue Feb 14 13:31:14 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 13:31:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 13:31:14 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 13:31:14 2012] Source does appear to be extended
[Tue Feb 14 13:31:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 13:31:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 13:31:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 13:31:24 2012] Initial guess for spatial extent in simple fitting = 24.58"
[Tue Feb 14 13:31:24 2012] source mask rpix=5.7, npix_max = 151, mask sum = 144, frac = 0.952
[Tue Feb 14 13:31:24 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 24.58"
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src17.ximg exists
[Tue Feb 14 14:14:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src17.csv
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Feb 14 14:14:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src17.csv
[Tue Feb 14 14:14:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Feb 14 14:14:30 2012] Fit fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Feb 14 15:31:35 2012] Warning, spatial fit 17 centroid is now closest to src. 19
[Tue Feb 14 15:31:35 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 15:31:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 15:31:35 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 15:31:35 2012] Source does appear to be extended
[Tue Feb 14 15:31:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 15:31:45 2012] XMMSAS src. selection expression = ellipse(14228.172000, 18390.545400, 1474.800042, 1474.800042, 0.000000, X, Y)
[Tue Feb 14 15:31:45 2012] Writing source region out to fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src17_src.reg
[Tue Feb 14 15:31:45 2012] Extracting stamp from image fullrun_mos1_xmm0504370401_pi300-10000_cl_sm2.00.img.gz, (79, 127) - (249, 297)
[Tue Feb 14 15:31:46 2012] XMMSAS bgd. selection expression = annulus(14228.172000, 18390.545400, 2458.000071, 4916.000141, X, Y) && !ellipse(11640.432419, 14947.266098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13790.300440, 23132.186600, 488.382414, 488.382414, 0.000000, X, Y) && !ellipse(18951.449860, 14350.884125, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 14 15:31:46 2012] Writing fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src17.gif
[Tue Feb 14 15:41:43 2012] Mean detx,y = (8118.23, 8738.60) 
[Tue Feb 14 15:41:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 15:42:38 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 15:42:38 2012] Setting source spectrum file to fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Feb 14 15:42:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Feb 14 17:11:11 2012] Updating aperture counts using extracted products
[Tue Feb 14 17:11:11 2012] Error reading totcts from fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Feb 14 17:11:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 17:11:11 2012] Using photon index=1.80, rate=0.00519, arf fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src17.arf
[Tue Feb 14 17:11:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 17:11:11 2012] Updating source flux to 7.3e-14