[Tue Feb 14 10:33:48 2012] Detection parameters:
  Position = (245.5, 175.2) = 22 2 57.22 42 8 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 303.2 +/- 29.7
  Background counts = 189.1
  Rate = 0.005 +/- 0.0004

[Tue Feb 14 10:33:48 2012] Off-axis axis estimate = 9.72'
[Tue Feb 14 10:38:28 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 10:38:28 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Tue Feb 14 10:38:28 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.096
[Tue Feb 14 10:38:28 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.29"
[Tue Feb 14 12:52:10 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src10.ximg exists
[Tue Feb 14 12:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src10.csv
[Tue Feb 14 12:52:10 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Feb 14 12:52:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src10.csv
[Tue Feb 14 12:52:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 12:52:10 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Feb 14 12:52:10 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Feb 14 12:52:10 2012] Fit fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Feb 14 13:31:14 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.593166 pixels away
[Tue Feb 14 13:31:14 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 13:31:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 13:31:14 2012] Assessing source extent using major
[Tue Feb 14 13:31:14 2012] Source does appear to be extended
[Tue Feb 14 13:31:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 13:31:24 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 13:31:24 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Tue Feb 14 13:31:24 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.096
[Tue Feb 14 13:31:24 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.29"
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src10.ximg exists
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Feb 14 14:14:30 2012] Fit fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src10 appears to have run properly
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Feb 14 14:14:30 2012] Fit fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Feb 14 15:31:35 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.610602 pixels away
[Tue Feb 14 15:31:35 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 15:31:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 15:31:35 2012] Assessing source extent using major
[Tue Feb 14 15:31:35 2012] Source does appear to be extended
[Tue Feb 14 15:31:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 15:31:45 2012] XMMSAS src. selection expression = ellipse(21312.502365, 15194.445343, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 14 15:31:45 2012] Writing source region out to fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src10_src.reg
[Tue Feb 14 15:31:45 2012] Extracting stamp from image fullrun_mos1_xmm0504370401_pi300-10000_cl_sm2.00.img.gz, (208, 138) - (283, 213)
[Tue Feb 14 15:31:45 2012] XMMSAS bgd. selection expression = annulus(21312.502365, 15194.445343, 1087.500000, 2175.000000, X, Y) && !ellipse(18951.449860, 14350.884125, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 14 15:31:45 2012] Writing fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src10.gif
[Tue Feb 14 15:39:15 2012] Mean detx,y = (9973.19, 1228.27) 
[Tue Feb 14 15:39:16 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 15:39:26 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 15:39:26 2012] Setting source spectrum file to fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Feb 14 15:39:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Feb 14 16:06:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 14 16:06:36 2012] rmf not generated due to insufficient counts
[Tue Feb 14 17:11:11 2012] Updating aperture counts using extracted products
[Tue Feb 14 17:11:11 2012] Error reading totcts from fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Feb 14 17:11:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 17:11:11 2012] Using photon index=1.80, rate=0.00452, arf fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src10.arf
[Tue Feb 14 17:11:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 17:11:11 2012] Updating source flux to 7.2e-14
[Tue Feb 14 17:11:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting