[Tue Feb 14 10:33:47 2012] Detection parameters:
  Position = (281.6, 283.0) = 22 2 43.14 42 16 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92326.0 +/- 366.1
  Background counts = 342.0
  Rate = 0.8 +/- 0.003

[Tue Feb 14 10:33:48 2012] Off-axis axis estimate = 1.66'
[Tue Feb 14 10:38:28 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 10:38:28 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Tue Feb 14 10:38:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Tue Feb 14 10:38:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Tue Feb 14 12:52:09 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 14 12:52:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 12:52:09 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 14 12:52:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 12:52:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 12:52:10 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 12:52:10 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 12:52:10 2012] Fit fullrun_mos1_xmm0504370401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 13:31:14 2012] Spatial fit model total counts = 72607.300000, observed total counts = 72690.000000
[Tue Feb 14 13:31:14 2012] Offset between fit and detection position for source 1 = 0.085594 pixels
[Tue Feb 14 13:31:14 2012] 72874.000000 total counts/ 14379.400000 bgd. counts: snr = 487.804040
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.085594 pixels
  Position = (281.6, 283.1) = 22 2 43.14 42 16 39.6
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 58494.6 +/- 270.0
  Background counts = 14379.4
  Rate = 0.5 +/- 0.002
[Tue Feb 14 13:31:14 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 13:31:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 13:31:14 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 13:31:14 2012] Source does appear to be extended
[Tue Feb 14 13:31:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 13:31:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 13:31:24 2012] Initial guess for spatial extent in simple fitting = 5.18"
[Tue Feb 14 13:31:24 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.050
[Tue Feb 14 13:31:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.18"
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 14 14:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 14 14:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 14:14:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 14:14:30 2012] fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 14:14:30 2012] Fit fullrun_mos1_xmm0504370401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 15:31:35 2012] Spatial fit model total counts = 72718.100000, observed total counts = 72690.000000
[Tue Feb 14 15:31:35 2012] Offset between fit and detection position for source 1 = 0.000291 pixels
[Tue Feb 14 15:31:35 2012] 72987.000000 total counts/ 14440.900000 bgd. counts: snr = 487.192776
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000291 pixels
  Position = (281.6, 283.1) = 22 2 43.14 42 16 39.6
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 58546.1 +/- 270.2
  Background counts = 14440.9
  Rate = 0.5 +/- 0.002
[Tue Feb 14 15:31:35 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 15:31:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 15:31:35 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 15:31:35 2012] Source does appear to be extended
[Tue Feb 14 15:31:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 15:31:45 2012] Counts = 58546.100000, rescaling region sizes by 3.000000
[Tue Feb 14 15:31:45 2012] XMMSAS src. selection expression = ellipse(24447.320000, 24584.045000, 930.985227, 930.985227, 0.000000, X, Y)
[Tue Feb 14 15:31:45 2012] Writing source region out to fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src1_src.reg
[Tue Feb 14 15:31:45 2012] Extracting stamp from image fullrun_mos1_xmm0504370401_pi300-10000_cl_sm2.00.img.gz, (228, 230) - (335, 337)
[Tue Feb 14 15:31:45 2012] XMMSAS bgd. selection expression = annulus(24447.320000, 24584.045000, 4654.926134, 9309.852268, X, Y) && !ellipse(23517.484283, 24075.303284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22066.609160, 17845.083400, 392.929611, 392.929611, 0.000000, X, Y) && !ellipse(32071.054108, 17447.460724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21312.502365, 15194.445343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24170.178101, 23886.923645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14228.172000, 18390.545400, 1966.400057, 1966.400057, 0.000000, X, Y)
[Tue Feb 14 15:31:45 2012] Writing fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src1.gif
[Tue Feb 14 15:32:03 2012] Mean detx,y = (166.61, -165.39) 
[Tue Feb 14 15:32:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 15:34:30 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 15:34:31 2012] Setting source spectrum file to fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 15:34:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Feb 14 17:11:10 2012] Updating aperture counts using extracted products
[Tue Feb 14 17:11:10 2012] Error reading totcts from fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 17:11:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 17:11:11 2012] Using photon index=1.80, rate=0.5, arf fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 17:11:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 17:11:11 2012] Updating source flux to 4.7e-12
[Tue Feb 14 17:12:36 2012] Reading fit data from xmm0504370401/analysis//spectral/fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Feb 14 17:12:36 2012] Spectral fit parameter nH value = 2.10814e+21
[Tue Feb 14 17:12:36 2012] Spectral fit parameter PhoIndex value = 1.86172
[Tue Feb 14 17:12:36 2012] Failed to get F(0.3-8.0) from xmm0504370401/analysis//spectral/fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Feb 14 17:12:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 17:12:36 2012] Using Nh = 2.1e+21, photon index=1.86, rate=0.5, arf fullrun_mos1_xmm0504370401_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 17:12:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 17:12:36 2012] Updating source flux to 5.5e-12