[Thu Jun  7 13:49:45 2012] Detection parameters:
  Position = (127.9, 333.0) = 12 48 4.88 -41 16 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.4 +/- 19.8
  Background counts = 96.2
  Rate = 0.003 +/- 0.0006

[Thu Jun  7 13:49:46 2012] Off-axis axis estimate = 12.61'
[Thu Jun  7 13:54:35 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 13:54:35 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Thu Jun  7 13:54:35 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.894
[Thu Jun  7 13:54:35 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 12.74"
[Thu Jun  7 16:05:30 2012] fullrun_pn_xmm0504360201_pi300-10000_cl_pass0_src32.ximg exists
[Thu Jun  7 16:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504360201_pi300-10000_cl_pass0_src32.csv
[Thu Jun  7 16:05:30 2012] fullrun_pn_xmm0504360201_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu Jun  7 16:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504360201_pi300-10000_cl_pass0_src32.csv
[Thu Jun  7 16:05:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504360201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504360201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 16:05:31 2012] fullrun_pn_xmm0504360201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu Jun  7 16:05:31 2012] fullrun_pn_xmm0504360201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu Jun  7 16:05:31 2012] Fit fullrun_pn_xmm0504360201_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Thu Jun  7 17:18:28 2012] Spatial fit model total counts = 1583.750000, observed total counts = 1473.000000
[Thu Jun  7 17:18:28 2012] Offset between fit and detection position for source 33 = 4.345463 pixels
[Thu Jun  7 17:18:28 2012] 1313.302000 total counts/ 235.452000 bgd. counts: snr = 70.243660
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 4.345463 pixels
  Position = (127.4, 337.3) = 12 48 5.08 -41 16 11.9
  Extent = 25.4 (25.3-25.5)", rotation angle = 0
  Source counts = 1077.8 +/- 36.2
  Background counts = 235.5
  Rate = 0.03 +/- 0.001
[Thu Jun  7 17:18:28 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 17:18:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 17:18:28 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 17:18:28 2012] Source does appear to be extended
[Thu Jun  7 17:18:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 17:18:28 2012] Source is confused with source 12
[Thu Jun  7 17:18:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  7 17:18:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  7 17:18:46 2012] Initial guess for spatial extent in simple fitting = 25.40"
[Thu Jun  7 17:18:46 2012] source mask rpix=5.8, npix_max = 160, mask sum = 141, frac = 0.877
[Thu Jun  7 17:18:46 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 25.40"
[Thu Jun  7 22:21:34 2012] fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_src32.ximg exists
[Thu Jun  7 22:21:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_src32.csv
[Thu Jun  7 22:21:35 2012] fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu Jun  7 22:21:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_src32.csv
[Thu Jun  7 22:21:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 22:21:35 2012] fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu Jun  7 22:21:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu Jun  7 22:21:35 2012] fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu Jun  7 22:21:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu Jun  7 22:21:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504360201_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 23:18:57 2012] Warning, spatial fit 32 centroid is now closest to src. 39
[Thu Jun  7 23:18:57 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 23:18:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 23:18:57 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 23:18:57 2012] Source does appear to be extended
[Thu Jun  7 23:18:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 23:19:16 2012] Counts = 1077.850000, rescaling region sizes by 2.000000
[Thu Jun  7 23:19:16 2012] XMMSAS src. selection expression = ellipse(11032.707620, 29293.540000, 3048.408088, 3048.408088, 0.000000, X, Y)
[Thu Jun  7 23:19:16 2012] Writing source region out to fullrun_pn_xmm0504360201_pi300-10000_pass1_cl_src33_src.reg
[Thu Jun  7 23:19:16 2012] Extracting stamp from image fullrun_pn_xmm0504360201_pi300-10000_cl_sm2.00.img.gz, (0, 162) - (303, 512)
[Thu Jun  7 23:19:16 2012] XMMSAS bgd. selection expression = annulus(11032.707620, 29293.540000, 10161.360292, 20322.720585, X, Y) && !ellipse(22741.464355, 20034.684555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20721.442000, 31656.857200, 486.444014, 486.444014, 0.000000, X, Y) && !ellipse(20112.533997, 32755.735718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13804.614600, 31352.834800, 488.995214, 488.995214, 0.000000, X, Y) && !ellipse(24724.784515, 34364.038300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21760.205400, 31907.141800, 412.428012, 412.428012, 0.000000, X, Y) && !ellipse(29475.266400, 31679.696800, 433.371212, 433.371212, 0.000000, X, Y) && !ellipse(11321.479767, 29795.500183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19272.018097, 29014.759613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24592.647800, 28467.717200, 415.896012, 415.896012, 0.000000, X, Y) && !ellipse(10705.970000, 28117.174000, 1124.128032, 1124.128032, 0.000000, X, Y) && !ellipse(22726.903400, 11261.557600, 307.126409, 307.126409, 0.000000, X, Y) && !ellipse(10552.964943, 26765.957764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10916.075378, 25798.186310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11496.876312, 24407.173981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30246.881080, 11543.026000, 641.520018, 293.901608, 328.566815, X, Y) && !ellipse(21151.215973, 20765.900864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27845.659943, 18857.083481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26641.654602, 12991.105560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31516.819397, 36300.656494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11059.423065, 27618.676178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13562.520966, 21169.706924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21252.372589, 37170.000702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16623.587875, 32006.162537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10588.467995, 28625.643829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11778.134186, 28227.285889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22857.878000, 27728.943600, 944.928027, 944.928027, 0.000000, X, Y) && !ellipse(10446.969536, 27185.104584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20002.546753, 27153.950470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12093.541046, 26993.130035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11628.125031, 27001.262390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10957.418167, 26317.756958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11012.975983, 25447.839264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11849.578369, 25535.279999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12163.256805, 24550.266785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11524.847046, 23698.387360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12006.448120, 21607.080521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18045.297653, 20475.394196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16662.567688, 19079.334656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24739.607640, 18992.488600, 395.564811, 395.564811, 0.000000, X, Y) && !ellipse(19300.558334, 17709.976746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16155.580551, 10700.658249, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  7 23:19:16 2012] Writing fullrun_pn_xmm0504360201_pi300-10000_pass1_cl_src33.gif
[Thu Jun  7 23:44:20 2012] Mean detx,y = (11540.30, 7785.90) 
[Thu Jun  7 23:44:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 23:50:59 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 23:50:59 2012] Setting source spectrum file to fullrun_pn_xmm0504360201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Jun  7 23:50:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504360201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Jun  8 01:12:08 2012] Updating aperture counts using extracted products
[Fri Jun  8 01:12:08 2012] Error reading totcts from fullrun_pn_xmm0504360201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jun  8 01:12:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 01:12:09 2012] Using photon index=1.80, rate=0.0326, arf fullrun_pn_xmm0504360201_pi300-10000_pass1_cl_src33.arf
[Fri Jun  8 01:12:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 01:12:09 2012] Updating source flux to 1.8e-13
[Fri Jun  8 01:12:33 2012] Flag c found in src. 33 procflags, skipping spectral fitting