[Thu Jun  7 13:50:30 2012] Detection parameters:
  Position = (261.8, 231.1) = 12 47 13.25 -41 23 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 459.2 +/- 26.9
  Background counts = 34.5
  Rate = 0.02 +/- 0.0009

[Thu Jun  7 13:50:31 2012] Off-axis axis estimate = 5.56'
[Thu Jun  7 16:05:32 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 16:05:32 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Thu Jun  7 16:05:32 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.059
[Thu Jun  7 16:05:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.21"
[Thu Jun  7 16:37:54 2012] fullrun_mos1_xmm0504360201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  7 16:37:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 16:37:54 2012] fullrun_mos1_xmm0504360201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  7 16:37:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 16:37:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504360201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504360201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 16:37:54 2012] fullrun_mos1_xmm0504360201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  7 16:37:54 2012] fullrun_mos1_xmm0504360201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  7 16:37:54 2012] Fit fullrun_mos1_xmm0504360201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun  7 17:18:32 2012] Spatial fit model total counts = 790.303000, observed total counts = 744.000000
[Thu Jun  7 17:18:32 2012] Offset between fit and detection position for source 1 = 0.096182 pixels
[Thu Jun  7 17:18:32 2012] 787.636000 total counts/ 495.087000 bgd. counts: snr = 13.147944
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.096182 pixels
  Position = (261.8, 231.1) = 12 47 13.25 -41 23 54.7
  Extent = 4.4 (3.9-5.0)", rotation angle = 0
  Source counts = 292.5 +/- 28.1
  Background counts = 495.1
  Rate = 0.008 +/- 0.0008
[Thu Jun  7 17:18:32 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 17:18:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 17:18:32 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 17:18:32 2012] Source does appear to be extended
[Thu Jun  7 17:18:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 22:21:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  7 22:21:36 2012] Initial guess for spatial extent in simple fitting = 4.36"
[Thu Jun  7 22:21:36 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.998
[Thu Jun  7 22:21:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.36"
[Thu Jun  7 22:49:16 2012] fullrun_mos1_xmm0504360201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  7 22:49:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360201_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 22:49:16 2012] fullrun_mos1_xmm0504360201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  7 22:49:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360201_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 22:49:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504360201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504360201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 22:49:16 2012] fullrun_mos1_xmm0504360201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  7 22:49:16 2012] fullrun_mos1_xmm0504360201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  7 22:49:16 2012] Fit fullrun_mos1_xmm0504360201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun  7 23:19:01 2012] Spatial fit model total counts = 735.532000, observed total counts = 704.000000
[Thu Jun  7 23:19:01 2012] Offset between fit and detection position for source 1 = 0.004947 pixels
[Thu Jun  7 23:19:01 2012] 735.118000 total counts/ 443.791000 bgd. counts: snr = 13.829023
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004947 pixels
  Position = (261.8, 231.1) = 12 47 13.26 -41 23 54.7
  Extent = 4.4 (3.8-4.9)", rotation angle = 0
  Source counts = 291.3 +/- 27.1
  Background counts = 443.8
  Rate = 0.008 +/- 0.0008
[Thu Jun  7 23:19:01 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 23:19:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 23:19:01 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 23:19:01 2012] Source does appear to be extended
[Thu Jun  7 23:19:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 00:45:55 2012] XMMSAS src. selection expression = ellipse(22725.464800, 20061.101800, 263.980808, 263.980808, 0.000000, X, Y)
[Fri Jun  8 00:45:55 2012] Writing source region out to fullrun_mos1_xmm0504360201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  8 00:45:55 2012] Extracting stamp from image fullrun_mos1_xmm0504360201_pi300-10000_cl_sm2.00.img.gz, (247, 216) - (277, 246)
[Fri Jun  8 00:45:55 2012] XMMSAS bgd. selection expression = annulus(22725.464800, 20061.101800, 439.968013, 879.936025, X, Y)
[Fri Jun  8 00:45:55 2012] Writing fullrun_mos1_xmm0504360201_pi300-10000_pass1_cl_src1.gif
[Fri Jun  8 00:45:57 2012] Mean detx,y = (3472.87, 3181.15) 
[Fri Jun  8 00:45:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 00:46:03 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 00:46:04 2012] Setting source spectrum file to fullrun_mos1_xmm0504360201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 00:46:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504360201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  8 01:12:10 2012] Updating aperture counts using extracted products
[Fri Jun  8 01:12:10 2012] Error reading totcts from fullrun_mos1_xmm0504360201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 01:12:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 01:12:10 2012] Using photon index=1.80, rate=0.00842, arf fullrun_mos1_xmm0504360201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 01:12:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 01:12:10 2012] Updating source flux to 1.2e-13
[Fri Jun  8 01:12:18 2012] Reading fit data from xmm0504360201/analysis//spectral/fullrun_mos1_xmm0504360201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  8 01:12:18 2012] Spectral fit parameter nH value = 6.91352e+20
[Fri Jun  8 01:12:18 2012] Spectral fit parameter PhoIndex value = 1.75086
[Fri Jun  8 01:12:18 2012] Failed to get F(0.3-8.0) from xmm0504360201/analysis//spectral/fullrun_mos1_xmm0504360201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  8 01:12:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 01:12:18 2012] Using Nh = 6.9e+20, photon index=1.75, rate=0.00842, arf fullrun_mos1_xmm0504360201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 01:12:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 01:12:19 2012] Updating source flux to 1.3e-13