[Fri Sep 23 02:28:25 2011] Detection parameters:
  Position = (458.2, 349.1) = 12 49 2.82 -41 21 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.7 +/- 31.9
  Background counts = 402.3
  Rate = 0.005 +/- 0.0008

[Fri Sep 23 02:28:25 2011] Off-axis axis estimate = 12.15'
[Fri Sep 23 02:32:40 2011] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 02:32:40 2011] Initial guess for spatial extent in simple fitting = 12.50"
[Fri Sep 23 02:32:40 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.076
[Fri Sep 23 02:32:40 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 12.50"
[Fri Sep 23 05:06:58 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_src28.ximg exists
[Fri Sep 23 05:06:58 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Sep 23 05:06:58 2011] Fit fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_src28 appears to have run properly
[Fri Sep 23 05:06:58 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Sep 23 05:06:58 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Sep 23 05:06:58 2011] Fit fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Sep 23 07:14:23 2011] Spatial fit model total counts = 4780.250000, observed total counts = 4799.000000
[Fri Sep 23 07:14:23 2011] Offset between fit and detection position for source 29 = 3.267996 pixels
[Fri Sep 23 07:14:23 2011] 4390.123000 total counts/ 3564.220000 bgd. counts: snr = 13.833969
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 3.267996 pixels
  Position = (461.2, 350.4) = 12 49 1.66 -41 21 0.0
  Extent = 17.7 (13.7-22.7)", rotation angle = 0
  Source counts = 825.9 +/- 66.3
  Background counts = 3564.2
  Rate = 0.03 +/- 0.002
[Fri Sep 23 07:14:23 2011] Spatial fit model total counts = 3681.250000, observed total counts = 3732.000000
[Fri Sep 23 07:14:23 2011] Offset between fit and detection position for source 29 = 3.081227 pixels
[Fri Sep 23 07:14:23 2011] Warning, changing simple spatial fit ID from 28 to 29
[Fri Sep 23 07:14:23 2011] 3421.517000 total counts/ 431.937000 bgd. counts: snr = 143.846724
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 3.081227 pixels
  Position = (462.0, 347.4) = 12 49 1.34 -41 21 12.9
  Extent = 25.4 (25.4-25.4)", rotation angle = 0
  Source counts = 2989.6 +/- 58.5
  Background counts = 431.9
  Rate = 0.1 +/- 0.002
[Fri Sep 23 07:14:23 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:14:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:14:23 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 07:14:23 2011] Source does appear to be extended
[Fri Sep 23 07:14:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 07:14:23 2011] Source is confused with source 3
[Fri Sep 23 07:14:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 07:14:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 07:14:39 2011] Initial guess for spatial extent in simple fitting = 25.39"
[Fri Sep 23 07:14:39 2011] source mask rpix=5.8, npix_max = 160, mask sum = 145, frac = 0.903
[Fri Sep 23 07:14:39 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 25.39"
[Fri Sep 23 10:36:52 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass1_src25.ximg exists
[Fri Sep 23 10:36:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504360101_pi300-10000_cl_pass1_src25.csv
[Fri Sep 23 10:36:52 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Sep 23 10:36:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504360101_pi300-10000_cl_pass1_src25.csv
[Fri Sep 23 10:36:52 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504360101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504360101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:36:52 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Sep 23 10:36:52 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Sep 23 10:36:52 2011] Fit fullrun_pn_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Sep 23 12:41:16 2011] Warning, spatial fit 25 centroid is now closest to src. 3
[Fri Sep 23 12:41:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 12:41:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 12:41:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 12:41:16 2011] Source does appear to be extended
[Fri Sep 23 12:41:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 12:41:29 2011] Counts = 2989.580000, rescaling region sizes by 2.000000
[Fri Sep 23 12:41:29 2011] XMMSAS src. selection expression = ellipse(40148.228000, 30177.384000, 3047.064088, 3047.064088, 0.000000, X, Y)
[Fri Sep 23 12:41:29 2011] Writing source region out to fullrun_pn_xmm0504360101_pi300-10000_pass1_cl_src29_src.reg
[Fri Sep 23 12:41:29 2011] Extracting stamp from image fullrun_pn_xmm0504360101_pi300-10000_cl_sm2.00.img.gz, (287, 172) - (595, 523)
[Fri Sep 23 12:41:29 2011] XMMSAS bgd. selection expression = annulus(40148.228000, 30177.384000, 10156.880292, 20313.760585, X, Y) && !ellipse(39258.160000, 31062.178000, 11254.824324, 11254.824324, 0.000000, X, Y) && !ellipse(38316.529968, 34200.387604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37699.862244, 35132.669281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37134.202942, 36203.978912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28229.035553, 35460.716736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30944.981842, 35375.723938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37021.914000, 34912.340000, 1985.824057, 1985.824057, 0.000000, X, Y) && !ellipse(24514.048600, 33989.329200, 554.262416, 554.262416, 0.000000, X, Y) && !ellipse(38034.302000, 33744.810000, 3971.648114, 1687.480049, 230.735000, X, Y) && !ellipse(38676.764343, 33414.315735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37248.632050, 33297.911285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38351.922000, 33196.956000, 1966.880057, 1966.880057, 0.000000, X, Y) && !ellipse(38183.242188, 32493.625916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37542.187200, 32075.990000, 1929.024056, 1929.024056, 0.000000, X, Y) && !ellipse(38663.284760, 32398.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38466.241760, 31633.109680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40444.100525, 30574.700836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40604.533200, 29704.822200, 2031.376058, 811.728023, 58.650000, X, Y) && !ellipse(41406.997345, 28841.420715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25975.758600, 28148.715400, 884.368025, 884.368025, 0.000000, X, Y) && !ellipse(34568.624237, 24744.198090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39512.076385, 24128.048096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28781.215400, 21896.174200, 368.772811, 368.772811, 0.000000, X, Y) && !ellipse(21681.693460, 19711.218600, 512.078415, 246.303207, 67.895126, X, Y) && !ellipse(24089.168000, 18548.227000, 367.720811, 367.720811, 0.000000, X, Y) && !ellipse(25974.657820, 16660.123600, 539.507216, 273.446408, 357.216574, X, Y)
[Fri Sep 23 12:41:29 2011] Writing fullrun_pn_xmm0504360101_pi300-10000_pass1_cl_src29.gif
[Fri Sep 23 13:16:28 2011] Mean detx,y = (12452.99, 4508.66) 
[Fri Sep 23 13:16:34 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 13:21:16 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 13:21:16 2011] Setting source spectrum file to fullrun_pn_xmm0504360101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Sep 23 13:21:16 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504360101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Sep 23 15:26:53 2011] Updating aperture counts using extracted products
[Fri Sep 23 15:26:53 2011] Error reading totcts from fullrun_pn_xmm0504360101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Sep 23 15:26:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 15:26:54 2011] Using photon index=1.80, rate=0.102, arf fullrun_pn_xmm0504360101_pi300-10000_pass1_cl_src29.arf
[Fri Sep 23 15:26:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 15:26:54 2011] Updating source flux to 5.1e-13
[Fri Sep 23 15:29:23 2011] Flag c found in src. 29 procflags, skipping spectral fitting