[Fri Sep 23 02:28:25 2011] Detection parameters:
  Position = (452.2, 354.7) = 12 49 5.14 -41 20 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.5 +/- 33.6
  Background counts = 436.9
  Rate = 0.005 +/- 0.0009

[Fri Sep 23 02:28:25 2011] Off-axis axis estimate = 11.87'
[Fri Sep 23 02:32:40 2011] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 02:32:40 2011] Initial guess for spatial extent in simple fitting = 12.36"
[Fri Sep 23 02:32:40 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.097
[Fri Sep 23 02:32:40 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 12.36"
[Fri Sep 23 05:06:58 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_src27.ximg exists
[Fri Sep 23 05:06:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_src27.csv
[Fri Sep 23 05:06:58 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Sep 23 05:06:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_src27.csv
[Fri Sep 23 05:06:58 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:06:58 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Sep 23 05:06:58 2011] fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Sep 23 05:06:58 2011] Fit fullrun_pn_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Sep 23 07:14:23 2011] Spatial fit model total counts = 5510.470000, observed total counts = 5505.000000
[Fri Sep 23 07:14:23 2011] Offset between fit and detection position for source 28 = 0.423011 pixels
[Fri Sep 23 07:14:23 2011] Warning, changing simple spatial fit ID from 27 to 26
[Fri Sep 23 07:14:23 2011] 5469.433100 total counts/ 5429.490000 bgd. counts: snr = 0.542079
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.423011 pixels
  Position = (451.9, 354.4) = 12 49 5.25 -41 20 42.8
  Extent = 3.2 (3.1-6.9)", rotation angle = 0
  Source counts = 39.9 +/- 74.0
  Background counts = 5429.5
  Rate = 0.001 +/- 0.003
  Deleting source due to low Poisson probability